diff --git a/README.md b/README.md index 021933a..7d94fd6 100644 --- a/README.md +++ b/README.md @@ -1,2 +1,4 @@ # u-boot +Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. + diff --git a/u-boot-1.1.4-pxa255_idp.patch b/u-boot-1.1.4-pxa255_idp.patch new file mode 100644 index 0000000..f502c8d --- /dev/null +++ b/u-boot-1.1.4-pxa255_idp.patch @@ -0,0 +1,27 @@ +diff -Nru u-boot-1.1.4.orig/cpu/pxa/start.S u-boot-1.1.4/cpu/pxa/start.S +--- u-boot-1.1.4.orig/cpu/pxa/start.S 2005-12-16 17:39:27.000000000 +0100 ++++ u-boot-1.1.4/cpu/pxa/start.S 2006-08-23 11:21:03.000000000 +0200 +@@ -221,10 +221,10 @@ + * before relocating, we have to setup RAM timing + * because memory timing is board-dependend, you will + * find a lowlevel_init.S in your board directory. +- */ + mov ip, lr + bl lowlevel_init + mov lr, ip ++ */ + + /* Memory interfaces are working. Disable MMU and enable I-cache. */ + +diff -Nru u-boot-1.1.4.orig/include/configs/pxa255_idp.h u-boot-1.1.4/include/configs/pxa255_idp.h +--- u-boot-1.1.4.orig/include/configs/pxa255_idp.h 2005-12-16 17:39:27.000000000 +0100 ++++ u-boot-1.1.4/include/configs/pxa255_idp.h 2006-08-23 11:22:23.000000000 +0200 +@@ -41,7 +41,7 @@ + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +-#define CONFIG_INIT_CRITICAL /* undef for developing */ ++/*#define CONFIG_INIT_CRITICAL /* undef for developing */ + + /* + * define the following to enable debug blinks. A debug blink function diff --git a/u-boot-1.1.6-mainstone.patch b/u-boot-1.1.6-mainstone.patch new file mode 100644 index 0000000..fc9a634 --- /dev/null +++ b/u-boot-1.1.6-mainstone.patch @@ -0,0 +1,1388 @@ +diff -Nru u-boot-1.1.6.orig/board/mainstone/config.mk u-boot-1.1.6/board/mainstone/config.mk +--- u-boot-1.1.6.orig/board/mainstone/config.mk 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.6/board/mainstone/config.mk 2007-01-16 23:36:11.000000000 +0100 +@@ -0,0 +1,3 @@ ++#TEXT_BASE = 0xa1700000 ++TEXT_BASE = 0xa3080000 ++#TEXT_BASE = 0 +diff -Nru u-boot-1.1.6.orig/board/mainstone/lowlevel_init.S u-boot-1.1.6/board/mainstone/lowlevel_init.S +--- u-boot-1.1.6.orig/board/mainstone/lowlevel_init.S 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.6/board/mainstone/lowlevel_init.S 2007-01-16 23:36:11.000000000 +0100 +@@ -0,0 +1,555 @@ ++/* ++ * board/mainstone/lowlwvel_init.S ++ * ++ * Configuration settings for the Intel HCDDBBVA0 aka PXA270 Mainstone board. ++ * ++ * (C) Copyright 2006 Koan Software Engineering - Bergamo - ITALIA ++ * Marco Cavallini, ++ * ++ * This was originally from the Lubbock u-boot port and from BLOB with cleanup ++ * ++ * NOTE: I haven't clean this up considerably, just enough to get it ++ * running. See hal_platform_setup.h for the source. See ++ * board/cradle/lowlevel_init.S for another PXA250 setup that is ++ * much cleaner. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++ ++/* wait for coprocessor write complete */ ++ .macro CPWAIT reg ++ mrc p15,0,\reg,c2,c0,0 ++ mov \reg,\reg ++ sub pc,pc,#4 ++ .endm ++ ++/*********** Write out to HEX 7 segment leds *********/ ++ ++#define DEBUG_HEXLOG ++ ++#ifdef DEBUG_HEXLOG ++#define LEDCTL 0x08000040 ++#define LEDDAT1 0x08000010 ++#define LEDDAT2 0x08000014 ++ ++.macro wait, count ++ mov r10, \count ++0: ++ subs r10, r10, #1 ++ bne 0b ++.endm ++ ++.macro hexlog_init ++ ldr r11, =LEDCTL ++ mov r10, #0xff ++ str r10, [r11] ++ ldr r11, =LEDDAT2 ++ mov r10, #0xFFFFFFFF ++ str r10, [r11] ++ ldr r11, =LEDDAT1 ++ mov r10, #0x0 ++ str r10, [r11] ++.endm ++ ++.macro hexlog, val ++ ldr r11, =LEDCTL ++ mov r10, #0xff ++ str r10, [r11] ++ ldr r11, =LEDDAT2 ++ mov r10, #0xFFFFFFFF ++ str r10, [r11] ++ ++ ldr r11, =LEDDAT1 ++ mov r10, \val ++ str r10, [r11] ++ ++ wait #0x400000 ++.endm ++ ++#else ++ ++.macro hexlog_init ++ nop ++.endm ++ ++.macro hexlog, val ++ nop ++.endm ++ ++#endif ++ ++/***********************************/ ++ ++/* ++ * Memory setup ++ */ ++ ++.globl lowlevel_init ++lowlevel_init: ++ ++ /* Set up GPIO pins first */ ++ ++ ldr r0, =GPSR0 ++ ldr r1, =CFG_GPSR0_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPSR1 ++ ldr r1, =CFG_GPSR1_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPSR2 ++ ldr r1, =CFG_GPSR2_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPSR3 ++ ldr r1, =CFG_GPSR3_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPCR0 ++ ldr r1, =CFG_GPCR0_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPCR1 ++ ldr r1, =CFG_GPCR1_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPCR2 ++ ldr r1, =CFG_GPCR2_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPCR3 ++ ldr r1, =CFG_GPCR3_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPDR0 ++ ldr r1, =CFG_GPDR0_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPDR1 ++ ldr r1, =CFG_GPDR1_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPDR2 ++ ldr r1, =CFG_GPDR2_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPDR3 ++ ldr r1, =CFG_GPDR3_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR0_L ++ ldr r1, =CFG_GAFR0_L_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR0_U ++ ldr r1, =CFG_GAFR0_U_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR1_L ++ ldr r1, =CFG_GAFR1_L_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR1_U ++ ldr r1, =CFG_GAFR1_U_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR2_L ++ ldr r1, =CFG_GAFR2_L_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR2_U ++ ldr r1, =CFG_GAFR2_U_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR3_L ++ ldr r1, =CFG_GAFR3_L_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR3_U ++ ldr r1, =CFG_GAFR3_U_VAL ++ str r1, [r0] ++ ++ ldr r0, =PSSR /* enable GPIO pins */ ++ ldr r1, =CFG_PSSR_VAL ++ str r1, [r0] ++ ++ /* ---------------------------------------------------------------- */ ++ /* Enable memory interface */ ++ /* */ ++ /* The sequence below is based on the recommended init steps */ ++ /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ ++ /* Chapter 10. */ ++ /* ---------------------------------------------------------------- */ ++ ++ hexlog_init ++ hexlog #0x0 /* HEXLOG */ ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 1: Wait for at least 200 microseconds to allow internal */ ++ /* clocks to settle. Only necessary after hard reset... */ ++ /* FIXME: can be optimized later */ ++ /* ---------------------------------------------------------------- */ ++ ++ ldr r3, =OSCR /* reset the OS Timer Count to zero */ ++ mov r2, #0 ++ str r2, [r3] ++ ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ ++ /* so 0x300 should be plenty */ ++1: ++ ldr r2, [r3] ++ cmp r4, r2 ++ bgt 1b ++ ++mem_init: ++ ++ ldr r1, =MEMC_BASE /* get memory controller base addr. */ ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 2a: Initialize Asynchronous static memory controller */ ++ /* ---------------------------------------------------------------- */ ++ ++ hexlog #0x1 /* HEXLOG */ ++ ++ /* MSC registers: timing, bus width, mem type */ ++ ++ /* MSC0: nCS(0,1) */ ++#ifdef CFG_MSC0_VAL ++ ldr r2, =CFG_MSC0_VAL ++ str r2, [r1, #MSC0_OFFSET] ++ ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ ++ /* that data latches */ ++ #endif ++ ++ /* MSC1: nCS(2,3) */ ++ ldr r2, =CFG_MSC1_VAL ++ str r2, [r1, #MSC1_OFFSET] ++ ldr r2, [r1, #MSC1_OFFSET] ++ ++ /* MSC2: nCS(4,5) */ ++ ldr r2, =CFG_MSC2_VAL ++ str r2, [r1, #MSC2_OFFSET] ++ ldr r2, [r1, #MSC2_OFFSET] ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 2b: Initialize Card Interface */ ++ /* ---------------------------------------------------------------- */ ++ ++ hexlog #0x2 /* HEXLOG */ ++ ++ /* MECR: Memory Expansion Card Register */ ++ ldr r2, =CFG_MECR_VAL ++ str r2, [r1, #MECR_OFFSET] ++ ldr r2, [r1, #MECR_OFFSET] ++ ++ /* MCMEM0: Card Interface slot 0 timing */ ++ ldr r2, =CFG_MCMEM0_VAL ++ str r2, [r1, #MCMEM0_OFFSET] ++ ldr r2, [r1, #MCMEM0_OFFSET] ++ ++ /* MCMEM1: Card Interface slot 1 timing */ ++ ldr r2, =CFG_MCMEM1_VAL ++ str r2, [r1, #MCMEM1_OFFSET] ++ ldr r2, [r1, #MCMEM1_OFFSET] ++ ++ /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ ++ ldr r2, =CFG_MCATT0_VAL ++ str r2, [r1, #MCATT0_OFFSET] ++ ldr r2, [r1, #MCATT0_OFFSET] ++ ++ /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ ++ ldr r2, =CFG_MCATT1_VAL ++ str r2, [r1, #MCATT1_OFFSET] ++ ldr r2, [r1, #MCATT1_OFFSET] ++ ++ /* MCIO0: Card Interface I/O Space Timing, slot 0 */ ++ ldr r2, =CFG_MCIO0_VAL ++ str r2, [r1, #MCIO0_OFFSET] ++ ldr r2, [r1, #MCIO0_OFFSET] ++ ++ /* MCIO1: Card Interface I/O Space Timing, slot 1 */ ++ ldr r2, =CFG_MCIO1_VAL ++ str r2, [r1, #MCIO1_OFFSET] ++ ldr r2, [r1, #MCIO1_OFFSET] ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 2c: Write FLYCNFG FIXME: what's that??? */ ++ /* ---------------------------------------------------------------- */ ++ ldr r2, =CFG_FLYCNFG_VAL ++ str r2, [r1, #FLYCNFG_OFFSET] ++ str r2, [r1, #FLYCNFG_OFFSET] ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ ++ /* ---------------------------------------------------------------- */ ++ ++ /* Before accessing MDREFR we need a valid DRI field, so we set */ ++ /* this to power on defaults + DRI field. */ ++ ++ ldr r4, [r1, #MDREFR_OFFSET] ++ ldr r2, =0xFFF ++ bic r4, r4, r2 ++ ++ ldr r3, =CFG_MDREFR_VAL ++ and r3, r3, r2 ++ ++ orr r4, r4, r3 ++ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ ++ ++ orr r4, r4, #MDREFR_K0RUN ++ orr r4, r4, #MDREFR_K0DB4 ++ orr r4, r4, #MDREFR_K0FREE ++ orr r4, r4, #MDREFR_K0DB2 ++ orr r4, r4, #MDREFR_K1DB2 ++ bic r4, r4, #MDREFR_K1FREE ++ bic r4, r4, #MDREFR_K2FREE ++ ++ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ ++ ldr r4, [r1, #MDREFR_OFFSET] ++ ++ /* Note: preserve the mdrefr value in r4 */ ++ ++ hexlog #0x3 /* HEXLOG */ ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ ++ /* ---------------------------------------------------------------- */ ++ ++ /* Initialize SXCNFG register. Assert the enable bits */ ++ ++ /* Write SXMRS to cause an MRS command to all enabled banks of */ ++ /* synchronous static memory. Note that SXLCR need not be written */ ++ /* at this time. */ ++ ++ ldr r2, =CFG_SXCNFG_VAL ++ str r2, [r1, #SXCNFG_OFFSET] ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 4: Initialize SDRAM */ ++ /* ---------------------------------------------------------------- */ ++ ++ hexlog #0x4 /* HEXLOG */ ++ ++ bic r4, r4, #(MDREFR_K2FREE |MDREFR_K1FREE | MDREFR_K0FREE) ++ ++ orr r4, r4, #MDREFR_K1RUN ++ bic r4, r4, #MDREFR_K2DB2 ++ str r4, [r1, #MDREFR_OFFSET] ++ ldr r4, [r1, #MDREFR_OFFSET] ++ ++ bic r4, r4, #MDREFR_SLFRSH ++ str r4, [r1, #MDREFR_OFFSET] ++ ldr r4, [r1, #MDREFR_OFFSET] ++ ++ orr r4, r4, #MDREFR_E1PIN ++ str r4, [r1, #MDREFR_OFFSET] ++ ldr r4, [r1, #MDREFR_OFFSET] ++ ++ hexlog #0x5 /* HEXLOG */ ++ ++ nop ++ nop ++ ++ ++ /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ ++ /* configure but not enable each SDRAM partition pair. */ ++ ++ /* fetch platform value of MDCNFG */ ++ ldr r4, =CFG_MDCNFG_VAL ++ ++ /* disable all sdram banks */ ++ bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) ++ bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) ++ ++ /* write initial value of MDCNFG, w/o enabling sdram banks */ ++ str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ ++ ldr r4, [r1, #MDCNFG_OFFSET] ++ ++ ++ /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ ++ /* 100..200 µsec. */ ++ /* The sequence below is based on the recommended init steps detailed */ ++ /* in the Intel PXA255 Processor Developer's Manual Section 6.11 */ ++ ++ ldr r3, =OSCR /* reset the OS Timer Count to zero */ ++ mov r2, #0 ++ str r2, [r3] ++ ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ ++ /* so 0x300 should be plenty */ ++1: ++ ldr r2, [r3] ++ cmp r4, r2 ++ bgt 1b ++ ++ /* Step 4f: Trigger a number (usually 8) refresh cycles by */ ++ /* attempting non-burst read or write accesses to disabled */ ++ /* SDRAM, as commonly specified in the power up sequence */ ++ /* documented in SDRAM data sheets. The address(es) used */ ++ /* for this purpose must not be cacheable. */ ++ ++ ldr r3, =CFG_DRAM_BASE ++ str r2, [r3] ++ str r2, [r3] ++ str r2, [r3] ++ str r2, [r3] ++ str r2, [r3] ++ str r2, [r3] ++ str r2, [r3] ++ str r2, [r3] ++ ++ ++ /* Step 4g: Write MDCNFG with enable bits asserted */ ++ /* (MDCNFG:DEx set to 1). */ ++ ++ ldr r3, [r1, #MDCNFG_OFFSET] ++ mov r4, r3 ++ orr r3, r3, #MDCNFG_DE0 ++ str r3, [r1, #MDCNFG_OFFSET] ++ mov r0, r3 ++ ++ /* Step 4h: Write MDMRS. */ ++ ++ ldr r2, =CFG_MDMRS_VAL ++ str r2, [r1, #MDMRS_OFFSET] ++ ++ /* enable APD */ ++ ldr r3, [r1, #MDREFR_OFFSET] ++ orr r3, r3, #MDREFR_APD ++ str r3, [r1, #MDREFR_OFFSET] ++ ++ /* We are finished with Intel's memory controller initialisation */ ++ ++ hexlog #0x6 /* HEXLOG */ ++ ++setvoltage: ++ ++ mov r10, lr ++ bl initPXAvoltage /* In case the board is rebooting with a */ ++ mov lr, r10 /* low voltage raise it up to a good one. */ ++ ++ hexlog #0x7 /* HEXLOG */ ++ ++wakeup: ++ /* Are we waking from sleep? */ ++ ldr r0, =RCSR ++ ldr r1, [r0] ++ and r1, r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) ++ str r1, [r0] ++ teq r1, #RCSR_SMR ++ ++ bne initirqs ++ ++ ldr r0, =PSSR ++ mov r1, #PSSR_PH ++ str r1, [r0] ++ ++ /* if so, resume at PSPR */ ++ ldr r0, =PSPR ++ ldr r1, [r0] ++ mov pc, r1 ++ ++ hexlog #0x8 /* HEXLOG */ ++ ++ /* ---------------------------------------------------------------- */ ++ /* Disable (mask) all interrupts at interrupt controller */ ++ /* ---------------------------------------------------------------- */ ++ ++initirqs: ++ ++ mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ ++ ldr r2, =ICLR ++ str r1, [r2] ++ ++ ldr r2, =ICMR /* mask all interrupts at the controller */ ++ str r1, [r2] ++ ++ /* ---------------------------------------------------------------- */ ++ /* Clock initialisation */ ++ /* ---------------------------------------------------------------- */ ++ ++initclks: ++ ++ /* Disable the peripheral clocks, and set the core clock frequency */ ++ ++ /* Turn Off on-chip peripheral clocks (except for memory) */ ++ /* for re-configuration. */ ++ ldr r1, =CKEN ++ ldr r2, =CFG_CKEN ++ str r2, [r1] ++ ++ /* ... and write the core clock config register */ ++ ldr r2, =CFG_CCCR ++ ldr r1, =CCCR ++ str r2, [r1] ++ ++ /* Turn on turbo mode */ ++ mrc p14, 0, r2, c6, c0, 0 ++ orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/ ++ mcr p14, 0, r2, c6, c0, 0 ++ ++ /* Re-write MDREFR */ ++ ldr r1, =MEMC_BASE ++ ldr r2, [r1, #MDREFR_OFFSET] ++ str r2, [r1, #MDREFR_OFFSET] ++#ifdef RTC ++ /* enable the 32Khz oscillator for RTC and PowerManager */ ++ ldr r1, =OSCC ++ mov r2, #OSCC_OON ++ str r2, [r1] ++ ++ /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ ++ /* has settled. */ ++60: ++ ldr r2, [r1] ++ ands r2, r2, #1 ++ beq 60b ++#else ++#error "RTC not defined" ++#endif ++ ++ /* Interrupt init: Mask all interrupts */ ++ ldr r0, =ICMR /* enable no sources */ ++ mov r1, #0 ++ str r1, [r0] ++ /* FIXME */ ++ ++#ifdef NODEBUG ++ /*Disable software and data breakpoints */ ++ mov r0,#0 ++ mcr p15,0,r0,c14,c8,0 /* ibcr0 */ ++ mcr p15,0,r0,c14,c9,0 /* ibcr1 */ ++ mcr p15,0,r0,c14,c4,0 /* dbcon */ ++ ++ /*Enable all debug functionality */ ++ mov r0,#0x80000000 ++ mcr p14,0,r0,c10,c0,0 /* dcsr */ ++#endif ++ ++ /* ---------------------------------------------------------------- */ ++ /* End lowlevel_init */ ++ /* ---------------------------------------------------------------- */ ++ ++ hexlog #0xf /* HEXLOG */ ++ ++endlowlevel_init: ++ ++ mov pc, lr +diff -Nru u-boot-1.1.6.orig/board/mainstone/mainstone.c u-boot-1.1.6/board/mainstone/mainstone.c +--- u-boot-1.1.6.orig/board/mainstone/mainstone.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.6/board/mainstone/mainstone.c 2007-01-16 23:36:11.000000000 +0100 +@@ -0,0 +1,83 @@ ++/* ++ * board/mainstone/mainstone.c ++ * ++ * Configuration settings for the Intel HCDDBBVA0 aka PXA270 Mainstone board. ++ * ++ * (C) Copyright 2006 Koan Software Engineering - Bergamo - ITALIA ++ * Marco Cavallini, ++ * ++ * portions from adsvix board configuration: ++ * (C) Copyright 2004 ++ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * (C) Copyright 2002 ++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH ++ * Marius Groeger ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++ ++/* ------------------------------------------------------------------------- */ ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ /* memory and cpu-speed are setup before relocation */ ++ /* so we do _nothing_ here */ ++ ++ /* arch number of mainstone-Board : MACH_TYPE_MAINSTONE */ ++ gd->bd->bi_arch_number = 406; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = 0xa000003c; ++ ++ return 0; ++} ++ ++int board_late_init(void) ++{ ++ setenv("stdout", "serial"); ++ setenv("stderr", "serial"); ++ return 0; ++} ++ ++ ++int dram_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ gd->bd->bi_dram[1].start = PHYS_SDRAM_2; ++ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; ++ gd->bd->bi_dram[2].start = PHYS_SDRAM_3; ++ gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; ++ gd->bd->bi_dram[3].start = PHYS_SDRAM_4; ++ gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; ++ ++ return 0; ++} +diff -Nru u-boot-1.1.6.orig/board/mainstone/Makefile u-boot-1.1.6/board/mainstone/Makefile +--- u-boot-1.1.6.orig/board/mainstone/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.6/board/mainstone/Makefile 2007-01-16 23:36:11.000000000 +0100 +@@ -0,0 +1,52 @@ ++# ++# board/mainstone/Makefile ++# ++# (C) Copyright 2006 Koan Software Engineering - Bergamo - ITALIA ++# Marco Cavallini, ++# ++# (C) Copyright 2000 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS := mainstone.o ++SOBJS := lowlevel_init.o pxavoltage.o ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) crv $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++-include .depend ++ ++######################################################################### +diff -Nru u-boot-1.1.6.orig/board/mainstone/pxavoltage.S u-boot-1.1.6/board/mainstone/pxavoltage.S +--- u-boot-1.1.6.orig/board/mainstone/pxavoltage.S 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.6/board/mainstone/pxavoltage.S 2007-01-16 23:36:11.000000000 +0100 +@@ -0,0 +1,237 @@ ++/* ++ * board/mainstone/pxavoltage.S ++ * ++ * Configuration settings for the Intel HCDDBBVA0 aka PXA270 Mainstone board. ++ * ++ * (C) Copyright 2006 Koan sas - Bergamo - ITALIA ++ * Marco Cavallini, (MCK) ++ * ++ * This was originally from the adsvix board ++ * (C) Copyright 2004 Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++ ++#define LTC1663_ADDR 0x20 ++ ++#define LTC1663_SY 0x01 /* Sync ACK */ ++#define LTC1663_SD 0x04 /* shutdown */ ++#define LTC1663_BG 0x04 /* Internal Voltage Ref */ ++ ++#define VOLT_1_55 18 /* DAC value for 1.55V */ ++ ++ .global initPXAvoltage ++ ++@ Set the voltage to 1.55V early in the boot process so we can run ++@ at a high clock speed and boot quickly. Note that this is necessary ++@ because the reset button does not reset the CPU voltage, so if the ++@ voltage was low (say 0.85V) then the CPU would crash without this ++@ routine ++ ++@ This routine clobbers r0-r4 ++ ++initializei2c: ++ ++ ldr r2, =CKEN ++ ldr r3, [r2] ++ orr r3, r3, #CKEN15_PWRI2C ++ str r3, [r2] ++ ++ ldr r2, =PCFR ++ ldr r3, [r2] ++ orr r3, r3, #PCFR_PI2C_EN ++ str r3, [r2] ++ ++ /* delay for about 250msec ++ */ ++ ldr r3, =OSCR ++ mov r2, #0 ++ str r2, [r3] ++ ldr r1, =0xC0000 ++ ++1: ++ ldr r2, [r3] ++ cmp r1, r2 ++ bgt 1b ++ ldr r0, =PWRICR ++ ldr r1, [r0] ++ bic r1, r1, #(ICR_MA | ICR_START | ICR_STOP) ++ str r1, [r0] ++ ++ orr r1, r1, #ICR_UR ++ str r1, [r0] ++ ++ ldr r2, =PWRISR ++ ldr r3, =0x7ff ++ str r3, [r2] ++ ++ bic r1, r1, #ICR_UR ++ str r1, [r0] ++ ++ mov r1, #(ICR_GCD | ICR_SCLE) ++ str r1, [r0] ++ ++ orr r1, r1, #ICR_IUE ++ str r1, [r0] ++ ++ orr r1, r1, #ICR_FM ++ str r1, [r0] ++ ++ /* delay for about 1msec ++ */ ++ ldr r3, =OSCR ++ mov r2, #0 ++ str r2, [r3] ++ ldr r1, =0xC00 ++ ++1: ++ ldr r2, [r3] ++ cmp r1, r2 ++ bgt 1b ++ mov pc, lr ++ ++sendbytei2c: ++ ldr r3, =PWRIDBR ++ str r0, [r3] ++ ldr r3, =PWRICR ++ ldr r0, [r3] ++ orr r0, r0, r1 ++ bic r0, r0, r2 ++ str r0, [r3] ++ orr r0, r0, #ICR_TB ++ str r0, [r3] ++ ++ mov r2, #0x100000 ++ ++waitfortxemptyi2c: ++ ++ ldr r0, =PWRISR ++ ldr r1, [r0] ++ ++ /* take it from the top if we don't get empty after a while */ ++ subs r2, r2, #1 ++ moveq lr, r4 ++ beq initPXAvoltage ++ ++ tst r1, #ISR_ITE ++ ++ beq waitfortxemptyi2c ++ ++ orr r1, r1, #ISR_ITE ++ str r1, [r0] ++ ++ mov pc, lr ++ ++initPXAvoltage: ++ ++ mov r4, lr ++ ++ bl setleds ++ ++ bl initializei2c ++ ++ bl setleds ++ ++ /* now send the real message to set the correct voltage */ ++ ldr r0, =LTC1663_ADDR ++ mov r0, r0, LSL #1 ++ mov r1, #ICR_START ++ ldr r2, =(ICR_STOP | ICR_ALDIE | ICR_ACKNAK) ++ bl sendbytei2c ++ ++ bl setleds ++ ++ mov r0, #LTC1663_BG ++ mov r1, #0 ++ mov r2, #(ICR_STOP | ICR_START) ++ bl sendbytei2c ++ ++ bl setleds ++ ++ ldr r0, =VOLT_1_55 ++ and r0, r0, #0xff ++ mov r1, #0 ++ mov r2, #(ICR_STOP | ICR_START) ++ bl sendbytei2c ++ ++ bl setleds ++ ++ ldr r0, =VOLT_1_55 ++ mov r0, r0, ASR #8 ++ and r0, r0, #0xff ++ mov r1, #ICR_STOP ++ mov r2, #ICR_START ++ bl sendbytei2c ++ ++ bl setleds ++ ++ @ delay a little for the volatage to stablize ++ ldr r3, =OSCR ++ mov r2, #0 ++ str r2, [r3] ++ ldr r1, =0xC0 ++ ++1: ++ ldr r2, [r3] ++ cmp r1, r2 ++ bgt 1b ++ mov pc, r4 ++ ++setleds: ++ mov pc, lr ++ ++ ldr r5, =0x40e00058 ++ ldr r3, [r5] ++ bic r3, r3, #0x3 ++ str r3, [r5] ++ ldr r5, =0x40e0000c ++ ldr r3, [r5] ++ orr r3, r3, #0x00010000 ++ str r3, [r5] ++ ++ @ inner loop ++ mov r0, #0x2 ++1: ++ ++ ldr r5, =0x40e00018 ++ mov r3, #0x00010000 ++ str r3, [r5] ++ ++ @ outer loop ++ mov r3, #0x00F00000 ++2: ++ subs r3, r3, #1 ++ bne 2b ++ ++ ldr r5, =0x40e00024 ++ mov r3, #0x00010000 ++ str r3, [r5] ++ ++ @ outer loop ++ mov r3, #0x00F00000 ++3: ++ subs r3, r3, #1 ++ bne 3b ++ ++ subs r0, r0, #1 ++ bne 1b ++ ++ mov pc, lr +diff -Nru u-boot-1.1.6.orig/board/mainstone/TODO u-boot-1.1.6/board/mainstone/TODO +--- u-boot-1.1.6.orig/board/mainstone/TODO 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.6/board/mainstone/TODO 2007-01-16 23:36:11.000000000 +0100 +@@ -0,0 +1,25 @@ ++TODO list ++for Intel HCDDBBVA0 aka PXA270 Mainstone board. ++------------------------------------------------ ++ ++* verify enviroment settings and parameters storing in flash ++ ++* manage ethernet connection ++ Here there are work in progress, if you want to contribute please mail me. ++ ++ lib_arm/board.c ++ function start_armboot() ++ ++ net/eth.c ++ function eth_initialize(gd->bd); ++ WARNING: there are two functions with same name ! ++ please consider the last one at thye bottom of the file ++ ++ drivers/smc91111.c ++ drivers/smc91111.h ++ function eth_init() ++ function smc_open() ++ ++------------------------------------------------ ++Marco Cavallini, ++Koan Software Engineering - Bergamo - ITALIA +diff -Nru u-boot-1.1.6.orig/board/mainstone/u-boot.lds u-boot-1.1.6/board/mainstone/u-boot.lds +--- u-boot-1.1.6.orig/board/mainstone/u-boot.lds 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.6/board/mainstone/u-boot.lds 2007-01-16 23:36:11.000000000 +0100 +@@ -0,0 +1,56 @@ ++/* ++ * (C) Copyright 2000 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/pxa/start.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +diff -Nru u-boot-1.1.6.orig/CREDITS u-boot-1.1.6/CREDITS +--- u-boot-1.1.6.orig/CREDITS 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/CREDITS 2007-01-16 23:36:11.000000000 +0100 +@@ -93,6 +93,11 @@ + E: jonathan.debruyne@siemens.atea.be + D: Port to Siemens IAD210 board + ++N: Marco Cavallini ++E: m.cavallini@koansoftware.com ++D: initial support for Intel Mainstone HCDDBBVA0 ++W: http://www.koansoftware.com ++ + N: Ken Chou + E: kchou@ieee.org + D: Support for A3000 SBC board +diff -Nru u-boot-1.1.6.orig/include/configs/mainstone.h u-boot-1.1.6/include/configs/mainstone.h +--- u-boot-1.1.6.orig/include/configs/mainstone.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.6/include/configs/mainstone.h 2007-01-16 23:36:11.000000000 +0100 +@@ -0,0 +1,285 @@ ++/* ++ * include/configs/mainstone.h ++ * ++ * Configuration settings for the Intel HCDDBBVA0 aka PXA270 Mainstone board. ++ * ++ * (C) Copyright 2006 Koan Software Engineering - Bergamo - ITALIA ++ * Marco Cavallini, ++ * ++ * portions from adsvix board configuration: ++ * (C) Copyright 2004 ++ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * (C) Copyright 2002 ++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH ++ * Marius Groeger ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ ++#define CONFIG_MAINSTONE 1 /* on Intel Mainstone Board */ ++//#define CONFIG_MMC 1 ++#define BOARD_LATE_INIT 1 ++ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define RTC ++ ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * Hardware drivers ++ */ ++#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ ++#define CONFIG_SMC91111_BASE 0x10000300 ++#define CONFIG_SMC_USE_32_BIT ++#define HARDCODE_MAC /* only for testing */ ++#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_FFUART 1 /* we use FFUART on Mainstone */ ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_ENV_OVERWRITE ++#define CONFIG_BAUDRATE 115200 ++#define CONFIG_DOS_PARTITION 1 ++#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII) ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include ++ ++#undef CONFIG_SHOW_BOOT_PROGRESS ++ ++#define CONFIG_BOOTDELAY 5 ++#define CONFIG_ETHADDR 01:23:45:67:89:ab ++#define CONFIG_NETMASK 255.255.255.0 ++#define CONFIG_IPADDR 192.168.0.184 ++#define CONFIG_SERVERIP 192.168.0.5 ++#define CONFIG_BOOTCOMMAND "" // "run boot_flash" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 ramdisk_size=12288"\ ++ " rw root=/dev/ram initrd=0xa0800000,5m" ++ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++/* #define CONFIG_INITRD_TAG 1 */ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ ++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_HUSH_PARSER 1 ++#define CFG_PROMPT_HUSH_PS2 "> " ++ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ ++ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++#define CFG_DEVICE_NULLDEV 1 ++ ++#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ ++#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0xa1000000 /* default load address */ ++ ++#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ ++#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ ++ ++ /* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++#define CFG_MMC_BASE 0xF0000000 ++ ++/* ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (128*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++/* ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ ++#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ ++#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ ++#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ ++#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ ++#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ ++#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ ++#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ ++ ++#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ ++ ++#define CFG_DRAM_BASE 0xa0000000 ++#define CFG_DRAM_SIZE 0x04000000 ++ ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++ ++/* ++ * GPIO settings for Mainstone ++ */ ++ ++#define CFG_GPSR0_VAL 0x00708800 ++#define CFG_GPSR1_VAL 0x03cf0002 ++#define CFG_GPSR2_VAL 0x0021FC00 ++#define CFG_GPSR3_VAL 0x00000000 ++ ++#define CFG_GPCR0_VAL 0x00001000 ++#define CFG_GPCR1_VAL 0x00000000 ++#define CFG_GPCR2_VAL 0x00000000 ++#define CFG_GPCR3_VAL 0x00000000 ++ ++#define CFG_GPDR0_VAL 0xC27B9C04 ++#define CFG_GPDR1_VAL 0x00EFAA83 ++#define CFG_GPDR2_VAL 0x0E23FC00 ++#define CFG_GPDR3_VAL 0x001E1F81 ++ ++#define CFG_GAFR0_L_VAL 0x94F00000 ++#define CFG_GAFR0_U_VAL 0x015A859A ++#define CFG_GAFR1_L_VAL 0x999A955A ++#define CFG_GAFR1_U_VAL 0x0005A4AA ++#define CFG_GAFR2_L_VAL 0x6AA00000 ++#define CFG_GAFR2_U_VAL 0x55A8041A ++#define CFG_GAFR3_L_VAL 0x56AA955A ++#define CFG_GAFR3_U_VAL 0x00000001 ++ ++#define CFG_PSSR_VAL 0x20 // ??????????? ++ ++/* ++ * Clock settings ++ */ ++#define CFG_CKEN 0x00400200 ++#define CFG_CCCR 0x02000290 /* 520Mhz */ ++/* #define CFG_CCCR 0x02000210 416 Mhz */ ++ ++/* ++ * Memory settings ++ */ ++ ++//#define CFG_MSC0_VAL 0x39F2A7A3 // DO NOT SET IT ! ++#define CFG_MSC1_VAL 0x0000A691 ++#define CFG_MSC2_VAL 0x0000B884 ++ ++#define CFG_MDCNFG_VAL 0x00000AC8 /* start with SDRAM part. disabled */ ++#define CFG_MDREFR_VAL 0x20ca2018 ++#define CFG_MDMRS_VAL 0x00000000 ++ ++#define CFG_FLYCNFG_VAL 0x00010001 ++#define CFG_SXCNFG_VAL 0x40044004 ++ ++/* ++ * PCMCIA and CF Interfaces ++ */ ++#define CFG_MECR_VAL 0x00000001 ++#define CFG_MCMEM0_VAL 0x00010204 ++#define CFG_MCMEM1_VAL 0x00010204 ++#define CFG_MCATT0_VAL 0x00010204 ++#define CFG_MCATT1_VAL 0x00010204 ++#define CFG_MCIO0_VAL 0x0000c108 ++#define CFG_MCIO1_VAL 0x0001c108 ++ ++//#define CONFIG_PXA_PCMCIA 1 ++//#define CONFIG_PXA_IDE 1 ++ ++#define CONFIG_PCMCIA_SLOT_A 1 ++/* just to keep build system happy */ ++ ++#define CFG_PCMCIA_MEM_ADDR 0x28000000 ++#define CFG_PCMCIA_MEM_SIZE 0x04000000 ++ ++#define CFG_IDE_MAXBUS 1 ++/* max. 1 IDE bus */ ++#define CFG_IDE_MAXDEVICE 1 ++/* max. 1 drive per IDE bus */ ++ ++#define CFG_ATA_IDE0_OFFSET 0x0000 ++ ++#define CFG_ATA_BASE_ADDR 0x20000000 ++ ++/* Offset for data I/O */ ++#define CFG_ATA_DATA_OFFSET 0x1f0 ++ ++/* Offset for normal register accesses */ ++#define CFG_ATA_REG_OFFSET 0x1f0 ++ ++/* Offset for alternate registers */ ++#define CFG_ATA_ALT_OFFSET 0x3f0 ++ ++/* ++ * FLASH and environment organization ++ */ ++ ++#define CFG_FLASH_CFI ++#define CFG_FLASH_CFI_DRIVER 1 ++ ++#define CFG_MONITOR_BASE 0 ++#define CFG_MONITOR_LEN 0x20000 ++ ++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ ++#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */ ++ ++/* timeout values are in ticks */ ++#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ ++#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ ++ ++/* write flash less slowly */ ++#define CFG_FLASH_USE_BUFFER_WRITE 1 ++ ++/* Flash environment locations */ ++#define CFG_ENV_IS_IN_FLASH 1 ++#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */ ++#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment */ ++#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ ++ ++/* FPGA */ ++#define MST_FPGA_BASE 0x08000000 ++#define MST_LEDDAT1 0x08000010 ++#define MST_LEDDAT2 0x08000014 ++#define MST_LEDCTL 0x08000040 ++ ++#endif /* __CONFIG_H */ +diff -Nru u-boot-1.1.6.orig/MAINTAINERS u-boot-1.1.6/MAINTAINERS +--- u-boot-1.1.6.orig/MAINTAINERS 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/MAINTAINERS 2007-01-16 23:36:11.000000000 +0100 +@@ -388,6 +388,10 @@ + + AT91RM9200DK at91rm9200 + ++Marco Cavallini ++ ++ mainstone xscale ++ + George G. Davis + + assabet SA1100 +diff -Nru u-boot-1.1.6.orig/Makefile u-boot-1.1.6/Makefile +--- u-boot-1.1.6.orig/Makefile 2007-01-16 23:35:38.000000000 +0100 ++++ u-boot-1.1.6/Makefile 2007-01-16 23:36:11.000000000 +0100 +@@ -1593,6 +1593,9 @@ + MPC8349EMDS_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds + ++mainstone_config : unconfig ++ @./mkconfig $(@:_config=) arm pxa mainstone ++ + ######################################################################### + ## MPC85xx Systems + ######################################################################### +diff -Nru u-boot-1.1.6.orig/README u-boot-1.1.6/README +--- u-boot-1.1.6.orig/README 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/README 2007-01-16 23:36:35.000000000 +0100 +@@ -314,10 +314,10 @@ + CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, + CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, + CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400, +- CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, +- CONFIG_PLEB2, CONFIG_SHANNON, CONFIG_P2_OMAP730, +- CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB, +- CONFIG_VCMA9 ++ CONFIG_LUBBOCK, CONFIG_MAINSTONE, CONFIG_OSK_OMAP5912, ++ CONFIG_OMAP2420H4, CONFIG_PLEB2, CONFIG_SHANNON, ++ CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410, ++ CONFIG_TRAB, CONFIG_VCMA9 + + MicroBlaze based boards: + ------------------------ diff --git a/u-boot-1.1.6-mainstone_rr.patch b/u-boot-1.1.6-mainstone_rr.patch new file mode 100644 index 0000000..f832457 --- /dev/null +++ b/u-boot-1.1.6-mainstone_rr.patch @@ -0,0 +1,402 @@ +diff -Nru u-boot-1.1.6/board/mainstone/lowlevel_init.S u-boot-1.1.6-dest/board/mainstone/lowlevel_init.S +--- u-boot-1.1.6/board/mainstone/lowlevel_init.S 2007-01-30 13:28:48.000000000 +0100 ++++ u-boot-1.1.6-dest/board/mainstone/lowlevel_init.S 2007-01-18 13:33:06.000000000 +0100 +@@ -45,7 +45,7 @@ + + /*********** Write out to HEX 7 segment leds *********/ + +-#define DEBUG_HEXLOG ++/* #define DEBUG_HEXLOG */ + + #ifdef DEBUG_HEXLOG + #define LEDCTL 0x08000040 +@@ -106,93 +106,6 @@ + + .globl lowlevel_init + lowlevel_init: +- +- /* Set up GPIO pins first */ +- +- ldr r0, =GPSR0 +- ldr r1, =CFG_GPSR0_VAL +- str r1, [r0] +- +- ldr r0, =GPSR1 +- ldr r1, =CFG_GPSR1_VAL +- str r1, [r0] +- +- ldr r0, =GPSR2 +- ldr r1, =CFG_GPSR2_VAL +- str r1, [r0] +- +- ldr r0, =GPSR3 +- ldr r1, =CFG_GPSR3_VAL +- str r1, [r0] +- +- ldr r0, =GPCR0 +- ldr r1, =CFG_GPCR0_VAL +- str r1, [r0] +- +- ldr r0, =GPCR1 +- ldr r1, =CFG_GPCR1_VAL +- str r1, [r0] +- +- ldr r0, =GPCR2 +- ldr r1, =CFG_GPCR2_VAL +- str r1, [r0] +- +- ldr r0, =GPCR3 +- ldr r1, =CFG_GPCR3_VAL +- str r1, [r0] +- +- ldr r0, =GPDR0 +- ldr r1, =CFG_GPDR0_VAL +- str r1, [r0] +- +- ldr r0, =GPDR1 +- ldr r1, =CFG_GPDR1_VAL +- str r1, [r0] +- +- ldr r0, =GPDR2 +- ldr r1, =CFG_GPDR2_VAL +- str r1, [r0] +- +- ldr r0, =GPDR3 +- ldr r1, =CFG_GPDR3_VAL +- str r1, [r0] +- +- ldr r0, =GAFR0_L +- ldr r1, =CFG_GAFR0_L_VAL +- str r1, [r0] +- +- ldr r0, =GAFR0_U +- ldr r1, =CFG_GAFR0_U_VAL +- str r1, [r0] +- +- ldr r0, =GAFR1_L +- ldr r1, =CFG_GAFR1_L_VAL +- str r1, [r0] +- +- ldr r0, =GAFR1_U +- ldr r1, =CFG_GAFR1_U_VAL +- str r1, [r0] +- +- ldr r0, =GAFR2_L +- ldr r1, =CFG_GAFR2_L_VAL +- str r1, [r0] +- +- ldr r0, =GAFR2_U +- ldr r1, =CFG_GAFR2_U_VAL +- str r1, [r0] +- +- ldr r0, =GAFR3_L +- ldr r1, =CFG_GAFR3_L_VAL +- str r1, [r0] +- +- ldr r0, =GAFR3_U +- ldr r1, =CFG_GAFR3_U_VAL +- str r1, [r0] +- +- ldr r0, =PSSR /* enable GPIO pins */ +- ldr r1, =CFG_PSSR_VAL +- str r1, [r0] +- + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ +@@ -386,7 +299,7 @@ + + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ +- /* 100..200 µsec. */ ++ /* 100..200 sec. */ + /* The sequence below is based on the recommended init steps detailed */ + /* in the Intel PXA255 Processor Developer's Manual Section 6.11 */ + +@@ -440,13 +353,100 @@ + + hexlog #0x6 /* HEXLOG */ + +-setvoltage: ++ /* Set up GPIO pins */ ++ ++ ldr r0, =GPSR0 ++ ldr r1, =CFG_GPSR0_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPSR1 ++ ldr r1, =CFG_GPSR1_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPSR2 ++ ldr r1, =CFG_GPSR2_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPSR3 ++ ldr r1, =CFG_GPSR3_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPCR0 ++ ldr r1, =CFG_GPCR0_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPCR1 ++ ldr r1, =CFG_GPCR1_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPCR2 ++ ldr r1, =CFG_GPCR2_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPCR3 ++ ldr r1, =CFG_GPCR3_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPDR0 ++ ldr r1, =CFG_GPDR0_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPDR1 ++ ldr r1, =CFG_GPDR1_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPDR2 ++ ldr r1, =CFG_GPDR2_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPDR3 ++ ldr r1, =CFG_GPDR3_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR0_L ++ ldr r1, =CFG_GAFR0_L_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR0_U ++ ldr r1, =CFG_GAFR0_U_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR1_L ++ ldr r1, =CFG_GAFR1_L_VAL ++ str r1, [r0] + ++ ldr r0, =GAFR1_U ++ ldr r1, =CFG_GAFR1_U_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR2_L ++ ldr r1, =CFG_GAFR2_L_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR2_U ++ ldr r1, =CFG_GAFR2_U_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR3_L ++ ldr r1, =CFG_GAFR3_L_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR3_U ++ ldr r1, =CFG_GAFR3_U_VAL ++ str r1, [r0] ++ ++ ldr r0, =PSSR /* enable GPIO pins */ ++ ldr r1, =CFG_PSSR_VAL ++ str r1, [r0] ++ ++#ifdef CFG_INITPXAVOLTAGE ++setvoltage: + mov r10, lr + bl initPXAvoltage /* In case the board is rebooting with a */ + mov lr, r10 /* low voltage raise it up to a good one. */ + + hexlog #0x7 /* HEXLOG */ ++#endif + + wakeup: + /* Are we waking from sleep? */ +diff -Nru u-boot-1.1.6/cpu/pxa/start.S u-boot-1.1.6-dest/cpu/pxa/start.S +--- u-boot-1.1.6/cpu/pxa/start.S 2007-01-30 13:28:48.000000000 +0100 ++++ u-boot-1.1.6-dest/cpu/pxa/start.S 2007-01-17 18:18:42.000000000 +0100 +@@ -263,11 +263,11 @@ + /* + * before relocating, we have to setup RAM timing + * because memory timing is board-dependend, you will +- * find a lowlevel_init.S in your board directory. ++ * find a lowlevel_init.S in your board directory. */ + mov ip, lr + bl lowlevel_init + mov lr, ip +- */ ++ /* */ + + /* Memory interfaces are working. Disable MMU and enable I-cache. */ + /* mk: hmm, this is not in the monahans docs, leave it now but +diff -Nru u-boot-1.1.6/include/configs/mainstone.h u-boot-1.1.6-dest/include/configs/mainstone.h +--- u-boot-1.1.6/include/configs/mainstone.h 2007-01-30 13:28:48.000000000 +0100 ++++ u-boot-1.1.6-dest/include/configs/mainstone.h 2007-01-18 11:31:47.000000000 +0100 +@@ -144,7 +144,7 @@ + * Physical Memory Map + */ + #define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1 0xa0000000 /* SDRAM_PHYSICAL_BASE */ /* SDRAM Bank #1 */ + #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ + #define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ + #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +@@ -164,37 +164,65 @@ + * GPIO settings for Mainstone + */ + +-#define CFG_GPSR0_VAL 0x00708800 +-#define CFG_GPSR1_VAL 0x03cf0002 +-#define CFG_GPSR2_VAL 0x0021FC00 +-#define CFG_GPSR3_VAL 0x00000000 +- +-#define CFG_GPCR0_VAL 0x00001000 +-#define CFG_GPCR1_VAL 0x00000000 +-#define CFG_GPCR2_VAL 0x00000000 +-#define CFG_GPCR3_VAL 0x00000000 +- +-#define CFG_GPDR0_VAL 0xC27B9C04 +-#define CFG_GPDR1_VAL 0x00EFAA83 +-#define CFG_GPDR2_VAL 0x0E23FC00 +-#define CFG_GPDR3_VAL 0x001E1F81 ++#define CFG_GPSR0_VAL 0x00709C04 /* GPSR0_value */ ++#define CFG_GPSR1_VAL 0x00CF0002 /* GPSR1_value */ ++#define CFG_GPSR2_VAL 0x052DE000 /* GPSR2_value */ ++#define CFG_GPSR3_VAL 0x00160000 /* GPSR3_value */ ++ ++#define CFG_GPCR0_VAL 0x00043000 /* GPCR0_value */ ++#define CFG_GPCR1_VAL 0x00100380 /* GPCR1_value */ ++#define CFG_GPCR2_VAL 0x08000000 /* GPCR1_value */ ++#define CFG_GPCR3_VAL 0x00080003 /* GPCR1_value */ ++ ++#define CFG_GPDR0_VAL 0xC991F800 /* GPDR0_value */ ++#define CFG_GPDR1_VAL 0xFCFFAB83 /* GPDR1_value */ ++#define CFG_GPDR2_VAL 0xF3FFFFF /* GPDR2_value */ ++#define CFG_GPDR3_VAL 0x01E1F80 /* GPDR3_value */ + +-#define CFG_GAFR0_L_VAL 0x94F00000 ++/*#define CFG_GAFR0_L_VAL 0x94F00000 + #define CFG_GAFR0_U_VAL 0x015A859A + #define CFG_GAFR1_L_VAL 0x999A955A + #define CFG_GAFR1_U_VAL 0x0005A4AA + #define CFG_GAFR2_L_VAL 0x6AA00000 + #define CFG_GAFR2_U_VAL 0x55A8041A + #define CFG_GAFR3_L_VAL 0x56AA955A +-#define CFG_GAFR3_U_VAL 0x00000001 ++#define CFG_GAFR3_U_VAL 0x00000001 */ ++ ++#define CFG_GAFR0_L_VAL 0x3 << 22 | 0x2 << 30 ++#define CFG_GAFR0_U_VAL 0x1 << 24 | 0x1 << 26 | 0x2 << 28 | 0x2 << 30 ++#define CFG_GAFR1_L_VAL 0x2 << 0 | 0x2 << 2 | 0x1 << 4 | 0x1 << 6 | 0x1 << 8 | 0x1 << 10 | 0x1 << 12 | 0x2 << 14 | 0x2 << 16 | 0x2 << 18 | 0x1 << 20 | 0x2 << 22 | 0x1 << 24 | 0x2 << 26 | 0x2 << 28 | 0x1 << 30 ++#define CFG_GAFR1_U_VAL 0x2 << 0 | 0x2 << 2 | 0x1 << 4 | 0x1 << 6 | 0x1 << 8 | 0x1 << 10 | 0x1 << 12 | 0x2 << 14 | 0x2 << 16 | 0x2 << 18 | 0x1 << 20 | 0x2 << 22 | 0x1 << 24 | 0x2 << 26 | 0x2 << 28 | 0x1 << 30 ++#define CFG_GAFR2_L_VAL 0x2 << 0 | 0x2 << 2 | 0x2 << 4 | 0x2 << 6 | 0x2 << 12 | 0x2 << 14 | 0x1 << 16 | 0x1 << 18 ++#define CFG_GAFR2_U_VAL 0x2 << 28 | 0x1 << 30 ++#define CFG_GAFR3_L_VAL 0x1 << 0 | 0x1 << 2 | 0x3 << 4 | 0x3 << 6 | 0x1 << 8 | 0x1 << 10 | 0x1 << 12 | 0x2 << 14 | 0x2 << 16 | 0x2 << 18 | 0x2 << 20 | 0x2 << 22 | 0x2 << 24 | 0x1 << 26 | 0x1 << 28 | 0x1 << 30 ++#define CFG_GAFR3_U_VAL 0x1 << 0 | 0x2 << 2 | 0x1 << 10 | 0x1 << 12 ++ ++/* ++xlli_GAFR0_L_value EQU (GPIO_11_AF3_48MCLK:OR:GPIO_15_AF2_nCS1) ++ 0x3 << 22 | 0x2 << 30 ++xlli_GAFR0_U_value EQU (GPIO_18_AF1_RDY:OR:GPIO_28_AF1_AC97_I2S_BITCLK:OR:GPIO_29_AF1_AC97SDATAIN0:OR:GPIO_30_AF2_AC97SDATAOUT:OR:GPIO_31_AF2_AC97SYNC) ++ 0x1 << 24 | 0x1 << 26 | 0x2 << 28 | 0x2 << 30 ++xlli_GAFR1_L_value EQU (GPIO_32_AF2_MMCLK:OR:GPIO_33_AF2_nCS5:OR:GPIO_34_AF1_FFRXD:OR:GPIO_35_AF1_FFCTS:OR:GPIO_36_AF1_FFDCD:OR:GPIO_37_AF1_FFDSR:OR:GPIO_38_AF1_FFRI:OR:GPIO_39_AF2_FFTXD:OR:GPIO_40_AF2_FFDTR:OR:GPIO_41_AF2_FFRTS:OR:GPIO_42_AF1_BTRXD:OR:GPIO_43_AF2_BTTXD:OR:GPIO_44_AF1_BTCTS:OR:GPIO_45_AF2_BTRTS:OR:GPIO_46_AF2_STDRXD_PWMOUT2:OR:GPIO_47_AF1_STDTXD) ++ 0x2 << 0 | 0x2 << 2 | 0x1 << 4 | 0x1 << 6 | 0x1 << 8 | 0x1 << 10 | 0x1 << 12 | 0x2 << 14 | 0x2 << 16 | 0x2 << 18 | 0x1 << 20 | 0x2 << 22 | 0x1 << 24 | 0x2 << 26 | 0x2 << 28 | 0x1 << 30 ++xlli_GAFR1_U_value EQU (GPIO_48_AF2_PCMCIAnPOE:OR:GPIO_49_AF2_nPWE:OR:GPIO_50_AF2_PCMCIAnPIOR:OR:GPIO_51_AF2_PCMCIAnPIOW:OR:GPIO_54_AF2_BBOBWAIT_PCMCIAnPCE2:OR:GPIO_55_AF2_BBIBDAT1_PCMCIAnPREG:OR:GPIO_56_AF1_PCMCIAnPWAIT:OR:GPIO_57_AF1_PCMCIAnIOIS16) ++ 0x2 << 0 | 0x2 << 2 | 0x2 << 4 | 0x2 << 6 | 0x2 << 12 | 0x2 << 14 | 0x1 << 16 | 0x1 << 18 ++xlli_GAFR2_L_value EQU (GPIO_78_AF2_nCS2:OR:GPIO_79_AF1_PCMCIAPSKTSEL) ++ 0x2 << 28 | 0x1 << 30 ++xlli_GAFR2_U_value EQU (GPIO_80_AF2_MBREQ_nCS4:OR:GPIO_85_AF1_PCMCIAnPCE1:OR:GPIO_89_AF1_AC97SYSCLK:OR:GPIO_92_AF1_MMDAT0:OR:GPIO_93_AF1_KPDKIN0:OR:GPIO_94_AF1_KPDKIN1:OR:GPIO_95_AF1_KPDKIN2) ++ 0x2 << 0 | 0x1 << 10 | 0x1 << 18 | 0x1 << 24 | 0x1 << 26 | 0x1 << 28 | 0x1 << 30 ++xlli_GAFR3_L_value EQU (GPIO_96_AF1_KPDKIN3:OR:GPIO_97_AF1_KPDKIN4:OR:GPIO_98_AF3_KPMKIN4:OR:GPIO_99_AF3_KPMKIN5:OR:GPIO_100_AF1_KPMKIN0:OR:GPIO_101_AF1_KPMKIN1:OR:GPIO_102_AF1_KPMKIN2:OR:GPIO_103_AF2_KPMKOUT0:OR:GPIO_104_AF2_KPMKOUT1:OR:GPIO_105_AF2_KPMKOUT2:OR:GPIO_106_AF2_KPMKOUT3:OR:GPIO_107_AF2_KPMKOUT4:OR:GPIO_108_AF2_KPMKOUT5:OR:GPIO_109_AF1_MMDAT1:OR:GPIO_110_AF1_MMDAT2:OR:GPIO_111_AF1_MMDAT3) ++ 0x1 << 0 | 0x1 << 2 | 0x3 << 4 | 0x3 << 6 | 0x1 << 8 | 0x1 << 10 | 0x1 << 12 | 0x2 << 14 | 0x2 << 16 | 0x2 << 18 | 0x2 << 20 | 0x2 << 22 | 0x2 << 24 | 0x1 << 26 | 0x1 << 28 | 0x1 << 30 ++xlli_GAFR3_U_value EQU (GPIO_112_AF1_MMCMD:OR:GPIO_113_AF2_AC97nRESET:OR:GPIO_117_AF1_SCL:OR:GPIO_118_AF1_SDA) ++ 0x1 << 0 | 0x2 << 2 | 0x1 << 10 | 0x1 << 12 ++*/ + + #define CFG_PSSR_VAL 0x20 // ??????????? + + /* + * Clock settings + */ +-#define CFG_CKEN 0x00400200 +-#define CFG_CCCR 0x02000290 /* 520Mhz */ ++#define CFG_CKEN 0x00400200 /* CKEN_value */ ++#define CFG_CCCR 0x00000107 /* CCCR_value */ /* 520Mhz */ + /* #define CFG_CCCR 0x02000210 416 Mhz */ + + /* +@@ -202,26 +230,26 @@ + */ + + //#define CFG_MSC0_VAL 0x39F2A7A3 // DO NOT SET IT ! +-#define CFG_MSC1_VAL 0x0000A691 +-#define CFG_MSC2_VAL 0x0000B884 +- +-#define CFG_MDCNFG_VAL 0x00000AC8 /* start with SDRAM part. disabled */ +-#define CFG_MDREFR_VAL 0x20ca2018 +-#define CFG_MDMRS_VAL 0x00000000 +- +-#define CFG_FLYCNFG_VAL 0x00010001 +-#define CFG_SXCNFG_VAL 0x40044004 ++#define CFG_MSC1_VAL 0x7FF07FF4 /* MSC1_value */ ++#define CFG_MSC2_VAL 0x7FFC7FF4 /* MSC2_value */ + ++#define CFG_MDCNFG_VAL 0x80000AD0 /* MDCNFG_value */ /* start with SDRAM part. disabled */ ++#define CFG_MDREFR_VAL 0x0000001E /* MDREFR_value */ ++#define CFG_MDMRS_VAL 0x00000000 /* MDMRS_value */ ++ ++#define CFG_FLYCNFG_VAL 0x00010001 /* FLYCNFG_value */ ++#define CFG_SXCNFG_VAL 0x40044004 /* SXCNFG_value */ ++// + /* + * PCMCIA and CF Interfaces + */ +-#define CFG_MECR_VAL 0x00000001 +-#define CFG_MCMEM0_VAL 0x00010204 +-#define CFG_MCMEM1_VAL 0x00010204 +-#define CFG_MCATT0_VAL 0x00010204 +-#define CFG_MCATT1_VAL 0x00010204 +-#define CFG_MCIO0_VAL 0x0000c108 +-#define CFG_MCIO1_VAL 0x0001c108 ++#define CFG_MECR_VAL 0x00000000 /* MECR_value */ ++#define CFG_MCMEM0_VAL 0x0002470F /* MCMEM0_value */ ++#define CFG_MCMEM1_VAL 0x0002470F /* MCMEM1_value */ ++#define CFG_MCATT0_VAL 0x0002C80F /* MCATT0_value */ ++#define CFG_MCATT1_VAL 0x0002C80F /* MCATT1_value */ ++#define CFG_MCIO0_VAL 0x0002471F /* MCIO0_value */ ++#define CFG_MCIO1_VAL 0x0002471F /* MCIO1_value */ + + //#define CONFIG_PXA_PCMCIA 1 + //#define CONFIG_PXA_IDE 1 +@@ -277,9 +305,9 @@ + #define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ + + /* FPGA */ +-#define MST_FPGA_BASE 0x08000000 +-#define MST_LEDDAT1 0x08000010 ++#define MST_FPGA_BASE 0x08000000 /* PLATFORM_REGISTERS */ ++#define MST_LEDDAT1 0x08000010 /* PLATFORM_HEXLED_DATA_offset */ + #define MST_LEDDAT2 0x08000014 +-#define MST_LEDCTL 0x08000040 ++#define MST_LEDCTL 0x08000040 /* PLATFORM_LED_CONTROL_offset */ + + #endif /* __CONFIG_H */ +diff -Nru u-boot-1.1.6/MAKEALL u-boot-1.1.6-dest/MAKEALL +--- u-boot-1.1.6/MAKEALL 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6-dest/MAKEALL 2007-01-17 00:16:03.000000000 +0100 +@@ -218,9 +218,9 @@ + + LIST_pxa=" \ + adsvix cerf250 cradle csb226 \ +- delta innokom lubbock pleb2 \ +- pxa255_idp wepep250 xaeniax xm250 \ +- xsengine zylonite \ ++ delta innokom lubbock mainstone \ ++ pleb2 pxa255_idp wepep250 xaeniax \ ++ xm250 xsengine zylonite \ + " + + LIST_ixp="ixdp425 ixdpg425 pdnb3" diff --git a/u-boot-1.1.6-phycore-pxa270-4.diff b/u-boot-1.1.6-phycore-pxa270-4.diff new file mode 100644 index 0000000..4666e48 --- /dev/null +++ b/u-boot-1.1.6-phycore-pxa270-4.diff @@ -0,0 +1,6145 @@ +diff -ru u-boot-1.1.6.orig/common/cmd_flash.c u-boot-1.1.6/common/cmd_flash.c +--- u-boot-1.1.6.orig/common/cmd_flash.c 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/common/cmd_flash.c 2007-01-16 14:44:09.000000000 +0100 +@@ -690,7 +690,7 @@ + ); + + U_BOOT_CMD( +- erase, 3, 1, do_flerase, ++ erase, 3, 0, do_flerase, + "erase - erase FLASH memory\n", + "start end\n" + " - erase FLASH from addr 'start' to addr 'end'\n" +diff -ru u-boot-1.1.6.orig/common/cmd_net.c u-boot-1.1.6/common/cmd_net.c +--- u-boot-1.1.6.orig/common/cmd_net.c 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/common/cmd_net.c 2007-01-16 14:44:09.000000000 +0100 +@@ -151,12 +151,16 @@ + #endif + } + ++#ifndef CFG_DIRECT_FLASH_TFTP ++extern flash_info_t flash_info[]; ++#endif ++ + static int + netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[]) + { + char *s; + int rcode = 0; +- int size; ++ int size, i; + + /* pre-set load_addr */ + if ((s = getenv("loadaddr")) != NULL) { +@@ -187,6 +191,17 @@ + return 1; + } + ++#ifndef CFG_DIRECT_FLASH_TFTP ++ for (i=0; i= flash_info[i].start[0] && ++ load_addr < flash_info[i].start[0] + flash_info[i].size) { ++ printf("load address is in flash. Will not overwrite\n"); ++ return 1; ++ } ++ } ++#endif ++ + if ((size = NetLoop(proto)) < 0) + return 1; + +diff -ru u-boot-1.1.6.orig/common/Makefile u-boot-1.1.6/common/Makefile +--- u-boot-1.1.6.orig/common/Makefile 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/common/Makefile 2007-01-16 14:44:09.000000000 +0100 +@@ -30,7 +30,7 @@ + COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \ + cmd_ace.o cmd_autoscript.o \ + cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \ +- cmd_cache.o cmd_console.o \ ++ cmd_cache.o cmd_chggpio.o cmd_console.o \ + cmd_date.o cmd_dcr.o cmd_diag.o cmd_display.o cmd_doc.o cmd_dtt.o \ + cmd_eeprom.o cmd_elf.o cmd_ext2.o \ + cmd_fat.o cmd_fdc.o cmd_fdos.o cmd_flash.o cmd_fpga.o \ +@@ -38,7 +38,7 @@ + cmd_load.o cmd_log.o \ + cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \ + cmd_nand.o cmd_net.o cmd_nvedit.o \ +- cmd_pci.o cmd_pcmcia.o cmd_portio.o \ ++ cmd_pxagpio.o cmd_pci.o cmd_pcmcia.o cmd_portio.o \ + cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o \ + cmd_usb.o cmd_vfd.o \ + command.o console.o devices.o dlmalloc.o docecc.o \ +diff -ru u-boot-1.1.6.orig/cpu/pxa/pxafb.c u-boot-1.1.6/cpu/pxa/pxafb.c +--- u-boot-1.1.6.orig/cpu/pxa/pxafb.c 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/cpu/pxa/pxafb.c 2007-01-16 14:44:09.000000000 +0100 +@@ -147,6 +147,38 @@ + #endif /* CONFIG_HITACHI_SX14 */ + + /*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SHARP_LQ084V1DG21 ++ ++# define LCD_BPP LCD_COLOR8 ++# define LCD_INVERT_COLORS /* Needed for colors to be correct, but why? */ ++ ++/* you have to set lccr0 and lccr3 (including pcd) */ ++# define REG_LCCR0 0x003008F9 ++# define REG_LCCR3 0x03700001 ++ ++vidinfo_t panel_info = { ++ vl_col: 640, ++ vl_row: 480, ++ vl_width: 171, ++ vl_height: 130, ++ vl_clkp: CFG_LOW, ++ vl_oep: CFG_HIGH, ++ vl_hsp: CFG_LOW, ++ vl_vsp: CFG_LOW, ++ vl_dp: CFG_HIGH, /* not used by PXA */ ++ vl_bpix: LCD_BPP, ++ vl_lbw: 1, ++ vl_splt: 0, ++ vl_clor: 1, ++ vl_tft: 1, ++ vl_hpw: 20, ++ vl_blw: 103, ++ vl_elw: 47, ++ vl_vpw: 6, ++ vl_bfw: 28, ++ vl_efw: 5, ++}; ++#endif /* CONFIG_SHARP_LQ084V1DG21 */ + + #if LCD_BPP == LCD_COLOR8 + void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue); +diff -ru u-boot-1.1.6.orig/cpu/pxa/serial.c u-boot-1.1.6/cpu/pxa/serial.c +--- u-boot-1.1.6.orig/cpu/pxa/serial.c 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/cpu/pxa/serial.c 2007-01-16 14:44:09.000000000 +0100 +@@ -61,7 +61,7 @@ + #endif /* CONFIG_CPU_MONAHANS */ + + FFIER = 0; /* Disable for now */ +- FFFCR = 0; /* No fifos enabled */ ++ FFFCR = FCR_TRFIFOE; /* Fifos enabled */ + + /* set baud rate */ + FFLCR = LCR_WLS0 | LCR_WLS1 | LCR_DLAB; +@@ -79,7 +79,7 @@ + #endif /* CONFIG_CPU_MONAHANS */ + + BTIER = 0; +- BTFCR = 0; ++ BTFCR = FCR_TRFIFOE; /* Fifos enabled */ + + /* set baud rate */ + BTLCR = LCR_DLAB; +diff -ru u-boot-1.1.6.orig/include/asm-arm/arch-pxa/pxa-regs.h u-boot-1.1.6/include/asm-arm/arch-pxa/pxa-regs.h +--- u-boot-1.1.6.orig/include/asm-arm/arch-pxa/pxa-regs.h 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/include/asm-arm/arch-pxa/pxa-regs.h 2007-01-16 14:44:09.000000000 +0100 +@@ -1269,15 +1269,15 @@ + #define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) + #define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) + +-#define GPLR(x) ((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3) +-#define GPDR(x) ((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3) +-#define GPSR(x) ((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3) +-#define GPCR(x) ((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3) +-#define GRER(x) ((((x) & 0x7f) < 96) ? _GRER(x) : GRER3) +-#define GFER(x) ((((x) & 0x7f) < 96) ? _GFER(x) : GFER3) +-#define GEDR(x) ((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3) +-#define GAFR(x) ((((x) & 0x7f) < 96) ? _GAFR(x) : \ +- ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)) ++#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) ++#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) ++#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) ++#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) ++#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) ++#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) ++#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) ++#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ ++ ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) + #else + + #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) +diff -ru u-boot-1.1.6.orig/include/asm-arm/global_data.h u-boot-1.1.6/include/asm-arm/global_data.h +--- u-boot-1.1.6.orig/include/asm-arm/global_data.h 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/include/asm-arm/global_data.h 2007-01-16 14:44:09.000000000 +0100 +@@ -61,6 +61,6 @@ + #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ + #define GD_FLG_SILENT 0x00004 /* Silent mode */ + +-#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8") ++#define DECLARE_GLOBAL_DATA_PTR register gd_t *volatile gd asm ("r8") + + #endif /* __ASM_GBL_DATA_H */ +diff -ru u-boot-1.1.6.orig/include/asm-arm/mach-types.h u-boot-1.1.6/include/asm-arm/mach-types.h +--- u-boot-1.1.6.orig/include/asm-arm/mach-types.h 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/include/asm-arm/mach-types.h 2007-01-16 14:48:32.000000000 +0100 +@@ -424,7 +424,7 @@ + #define MACH_TYPE_MPORT3S 411 + #define MACH_TYPE_RA_ALPHA 412 + #define MACH_TYPE_XCEP 413 +-#define MACH_TYPE_ARCOM_MERCURY 414 ++#define MACH_TYPE_ARCOM_VULCAN 414 + #define MACH_TYPE_STARGATE 415 + #define MACH_TYPE_ARMADILLOJ 416 + #define MACH_TYPE_ELROY_JACK 417 +@@ -457,7 +457,7 @@ + #define MACH_TYPE_XM250 444 + #define MACH_TYPE_T6TC1XB 445 + #define MACH_TYPE_ESS710 446 +-#define MACH_TYPE_MX3ADS 447 ++#define MACH_TYPE_MX31ADS 447 + #define MACH_TYPE_HIMALAYA 448 + #define MACH_TYPE_BOLFENK 449 + #define MACH_TYPE_AT91RM9200KR 450 +@@ -736,6 +736,236 @@ + #define MACH_TYPE_LN2410SBC 725 + #define MACH_TYPE_CB3RUFC 726 + #define MACH_TYPE_MP2USB 727 ++#define MACH_TYPE_NTNP425C 728 ++#define MACH_TYPE_COLIBRI 729 ++#define MACH_TYPE_PCM7220 730 ++#define MACH_TYPE_GATEWAY7001 731 ++#define MACH_TYPE_PCM027 732 ++#define MACH_TYPE_CMPXA 733 ++#define MACH_TYPE_ANUBIS 734 ++#define MACH_TYPE_ITE8152 735 ++#define MACH_TYPE_LPC3XXX 736 ++#define MACH_TYPE_PUPPETEER 737 ++#define MACH_TYPE_MACH_VADATECH 738 ++#define MACH_TYPE_E570 739 ++#define MACH_TYPE_X50 740 ++#define MACH_TYPE_RECON 741 ++#define MACH_TYPE_XBOARDGP8 742 ++#define MACH_TYPE_FPIC2 743 ++#define MACH_TYPE_AKITA 744 ++#define MACH_TYPE_A81 745 ++#define MACH_TYPE_SVM_SC25X 746 ++#define MACH_TYPE_VADATECH020 747 ++#define MACH_TYPE_TLI 748 ++#define MACH_TYPE_EDB9315LC 749 ++#define MACH_TYPE_PASSEC 750 ++#define MACH_TYPE_DS_TIGER 751 ++#define MACH_TYPE_E310 752 ++#define MACH_TYPE_E330 753 ++#define MACH_TYPE_RT3000 754 ++#define MACH_TYPE_NOKIA770 755 ++#define MACH_TYPE_PNX0106 756 ++#define MACH_TYPE_HX21XX 757 ++#define MACH_TYPE_FARADAY 758 ++#define MACH_TYPE_SBC9312 759 ++#define MACH_TYPE_BATMAN 760 ++#define MACH_TYPE_JPD201 761 ++#define MACH_TYPE_MIPSA 762 ++#define MACH_TYPE_KACOM 763 ++#define MACH_TYPE_SWARCOCPU 764 ++#define MACH_TYPE_SWARCODSL 765 ++#define MACH_TYPE_BLUEANGEL 766 ++#define MACH_TYPE_HAIRYGRAMA 767 ++#define MACH_TYPE_BANFF 768 ++#define MACH_TYPE_CARMEVA 769 ++#define MACH_TYPE_SAM255 770 ++#define MACH_TYPE_PPM10 771 ++#define MACH_TYPE_EDB9315A 772 ++#define MACH_TYPE_SUNSET 773 ++#define MACH_TYPE_STARGATE2 774 ++#define MACH_TYPE_INTELMOTE2 775 ++#define MACH_TYPE_TRIZEPS4 776 ++#define MACH_TYPE_MAINSTONE2 777 ++#define MACH_TYPE_EZ_IXP42X 778 ++#define MACH_TYPE_TAPWAVE_ZODIAC 779 ++#define MACH_TYPE_UNIVERSALMETER 780 ++#define MACH_TYPE_HICOARM9 781 ++#define MACH_TYPE_PNX4008 782 ++#define MACH_TYPE_KWS6000 783 ++#define MACH_TYPE_PORTUX920T 784 ++#define MACH_TYPE_EZ_X5 785 ++#define MACH_TYPE_OMAP_RUDOLPH 786 ++#define MACH_TYPE_CPUAT91 787 ++#define MACH_TYPE_REA9200 788 ++#define MACH_TYPE_ACTS_PUNE_SA1110 789 ++#define MACH_TYPE_IXP425 790 ++#define MACH_TYPE_ARGONPLUSODYSSEY 791 ++#define MACH_TYPE_PERCH 792 ++#define MACH_TYPE_EIS05R1 793 ++#define MACH_TYPE_PEPPERPAD 794 ++#define MACH_TYPE_SB3010 795 ++#define MACH_TYPE_RM9200 796 ++#define MACH_TYPE_DMA03 797 ++#define MACH_TYPE_ROAD_S101 798 ++#define MACH_TYPE_IQ_NEXTGEN_A 799 ++#define MACH_TYPE_IQ_NEXTGEN_B 800 ++#define MACH_TYPE_IQ_NEXTGEN_C 801 ++#define MACH_TYPE_IQ_NEXTGEN_D 802 ++#define MACH_TYPE_IQ_NEXTGEN_E 803 ++#define MACH_TYPE_MALLOW_AT91 804 ++#define MACH_TYPE_CYBERTRACKER_I 805 ++#define MACH_TYPE_GESBC931X 806 ++#define MACH_TYPE_CENTIPAD 807 ++#define MACH_TYPE_ARMSOC 808 ++#define MACH_TYPE_SE4200 809 ++#define MACH_TYPE_EMS197A 810 ++#define MACH_TYPE_MICRO9 811 ++#define MACH_TYPE_MICRO9L 812 ++#define MACH_TYPE_UC5471DSP 813 ++#define MACH_TYPE_SJ5471ENG 814 ++#define MACH_TYPE_CMPXA26X 815 ++#define MACH_TYPE_NC 816 ++#define MACH_TYPE_OMAP_PALMTE 817 ++#define MACH_TYPE_AJAX52X 818 ++#define MACH_TYPE_SIRIUSTAR 819 ++#define MACH_TYPE_IODATA_HDLG 820 ++#define MACH_TYPE_AT91RM9200UTL 821 ++#define MACH_TYPE_BIOSAFE 822 ++#define MACH_TYPE_MP1000 823 ++#define MACH_TYPE_PARSY 824 ++#define MACH_TYPE_CCXP 825 ++#define MACH_TYPE_OMAP_GSAMPLE 826 ++#define MACH_TYPE_REALVIEW_EB 827 ++#define MACH_TYPE_SAMOA 828 ++#define MACH_TYPE_T3XSCALE 829 ++#define MACH_TYPE_I878 830 ++#define MACH_TYPE_BORZOI 831 ++#define MACH_TYPE_GECKO 832 ++#define MACH_TYPE_DS101 833 ++#define MACH_TYPE_OMAP_PALMTT2 834 ++#define MACH_TYPE_XSCALE_PALMLD 835 ++#define MACH_TYPE_CC9C 836 ++#define MACH_TYPE_SBC1670 837 ++#define MACH_TYPE_IXDP28X5 838 ++#define MACH_TYPE_OMAP_PALMTT 839 ++#define MACH_TYPE_ML696K 840 ++#define MACH_TYPE_ARCOM_ZEUS 841 ++#define MACH_TYPE_OSIRIS 842 ++#define MACH_TYPE_MAESTRO 843 ++#define MACH_TYPE_TUNGE2 844 ++#define MACH_TYPE_IXBBM 845 ++#define MACH_TYPE_MX27 846 ++#define MACH_TYPE_AX8004 847 ++#define MACH_TYPE_AT91SAM9261EK 848 ++#define MACH_TYPE_LOFT 849 ++#define MACH_TYPE_MAGPIE 850 ++#define MACH_TYPE_MX21 851 ++#define MACH_TYPE_MB87M3400 852 ++#define MACH_TYPE_MGUARD_DELTA 853 ++#define MACH_TYPE_DAVINCI_DVDP 854 ++#define MACH_TYPE_HTCUNIVERSAL 855 ++#define MACH_TYPE_TPAD 856 ++#define MACH_TYPE_ROVERP3 857 ++#define MACH_TYPE_JORNADA928 858 ++#define MACH_TYPE_MV88FXX81 859 ++#define MACH_TYPE_STMP36XX 860 ++#define MACH_TYPE_SXNI79524 861 ++#define MACH_TYPE_AMS_DELTA 862 ++#define MACH_TYPE_URANIUM 863 ++#define MACH_TYPE_UCON 864 ++#define MACH_TYPE_NAS100D 865 ++#define MACH_TYPE_L083_1000 866 ++#define MACH_TYPE_EZX 867 ++#define MACH_TYPE_PNX5220 868 ++#define MACH_TYPE_BUTTE 869 ++#define MACH_TYPE_SRM2 870 ++#define MACH_TYPE_DSBR 871 ++#define MACH_TYPE_CRYSTALBALL 872 ++#define MACH_TYPE_TINYPXA27X 873 ++#define MACH_TYPE_HERBIE 874 ++#define MACH_TYPE_MAGICIAN 875 ++#define MACH_TYPE_CM4002 876 ++#define MACH_TYPE_B4 877 ++#define MACH_TYPE_MAUI 878 ++#define MACH_TYPE_CYBERTRACKER_G 879 ++#define MACH_TYPE_NXDKN 880 ++#define MACH_TYPE_MIO8390 881 ++#define MACH_TYPE_OMI_BOARD 882 ++#define MACH_TYPE_MX21CIV 883 ++#define MACH_TYPE_MAHI_CDAC 884 ++#define MACH_TYPE_XSCALE_PALMTX 885 ++#define MACH_TYPE_S3C2413 887 ++#define MACH_TYPE_SAMSYS_EP0 888 ++#define MACH_TYPE_WG302V1 889 ++#define MACH_TYPE_WG302V2 890 ++#define MACH_TYPE_EB42X 891 ++#define MACH_TYPE_IQ331ES 892 ++#define MACH_TYPE_COSYDSP 893 ++#define MACH_TYPE_UPLAT7D 894 ++#define MACH_TYPE_PTDAVINCI 895 ++#define MACH_TYPE_MBUS 896 ++#define MACH_TYPE_NADIA2VB 897 ++#define MACH_TYPE_R1000 898 ++#define MACH_TYPE_HW90250 899 ++#define MACH_TYPE_OMAP_2430SDP 900 ++#define MACH_TYPE_DAVINCI_EVM 901 ++#define MACH_TYPE_OMAP_TORNADO 902 ++#define MACH_TYPE_OLOCREEK 903 ++#define MACH_TYPE_PALMZ72 904 ++#define MACH_TYPE_NXDB500 905 ++#define MACH_TYPE_APF9328 906 ++#define MACH_TYPE_OMAP_WIPOQ 907 ++#define MACH_TYPE_OMAP_TWIP 908 ++#define MACH_TYPE_XSCALE_PALMTREO650 909 ++#define MACH_TYPE_ACUMEN 910 ++#define MACH_TYPE_XP100 911 ++#define MACH_TYPE_FS2410 912 ++#define MACH_TYPE_PXA270_CERF 913 ++#define MACH_TYPE_SQ2FTLPALM 914 ++#define MACH_TYPE_BSEMSERVER 915 ++#define MACH_TYPE_NETCLIENT 916 ++#define MACH_TYPE_XSCALE_PALMTT5 917 ++#define MACH_TYPE_OMAP_PALMTC 918 ++#define MACH_TYPE_OMAP_APOLLON 919 ++#define MACH_TYPE_ARGONLVEVB 920 ++#define MACH_TYPE_REA_2D 921 ++#define MACH_TYPE_TI3E524 922 ++#define MACH_TYPE_ATEB9200 923 ++#define MACH_TYPE_AUCKLAND 924 ++#define MACH_TYPE_AK3320M 925 ++#define MACH_TYPE_DURAMAX 926 ++#define MACH_TYPE_N35 927 ++#define MACH_TYPE_PRONGHORN 928 ++#define MACH_TYPE_FUNDY 929 ++#define MACH_TYPE_LOGICPD_PXA270 930 ++#define MACH_TYPE_CPU777 931 ++#define MACH_TYPE_SIMICON9201 932 ++#define MACH_TYPE_LEAP2_HPM 933 ++#define MACH_TYPE_CM922TXA10 934 ++#define MACH_TYPE_PXA 935 ++#define MACH_TYPE_SANDGATE2 936 ++#define MACH_TYPE_SANDGATE2G 937 ++#define MACH_TYPE_SANDGATE2P 938 ++#define MACH_TYPE_FRED_JACK 939 ++#define MACH_TYPE_TTG_COLOR1 940 ++#define MACH_TYPE_NXEB500HMI 941 ++#define MACH_TYPE_NETDCU8 942 ++#define MACH_TYPE_ML675050_CPU_BOA 943 ++#define MACH_TYPE_NG_FVX538 944 ++#define MACH_TYPE_NG_FVS338 945 ++#define MACH_TYPE_PNX4103 946 ++#define MACH_TYPE_HESDB 947 ++#define MACH_TYPE_XSILO 948 ++#define MACH_TYPE_ESPRESSO 949 ++#define MACH_TYPE_EMLC 950 ++#define MACH_TYPE_SISTERON 951 ++#define MACH_TYPE_RX1950 952 ++#define MACH_TYPE_TSC_VENUS 953 ++#define MACH_TYPE_DS101J 954 ++#define MACH_TYPE_MXC30030ADS 955 ++#define MACH_TYPE_FUJITSU_WIMAXSOC 956 ++#define MACH_TYPE_DUALPCMODEM 957 ++#define MACH_TYPE_GESBC9312 958 + #define MACH_TYPE_PDNB3 1002 + + #ifdef CONFIG_ARCH_EBSA110 +@@ -3541,9 +3771,9 @@ + # else + # define machine_arch_type MACH_TYPE_RAMSES + # endif +-# define machine_is_ramses() (machine_arch_type == MACH_TYPE_RAMSES) ++# define machine_is_mnci() (machine_arch_type == MACH_TYPE_RAMSES) + #else +-# define machine_is_ramses() (0) ++# define machine_is_mnci() (0) + #endif + + #ifdef CONFIG_ARCH_S28X +@@ -4501,9 +4731,9 @@ + # else + # define machine_arch_type MACH_TYPE_M825XX + # endif +-# define machine_is_m825xx() (machine_arch_type == MACH_TYPE_M825XX) ++# define machine_is_comcerto() (machine_arch_type == MACH_TYPE_M825XX) + #else +-# define machine_is_m825xx() (0) ++# define machine_is_comcerto() (0) + #endif + + #ifdef CONFIG_SA1100_M7100 +@@ -5658,16 +5888,16 @@ + # define machine_is_xcep() (0) + #endif + +-#ifdef CONFIG_MACH_ARCOM_MERCURY ++#ifdef CONFIG_MACH_ARCOM_VULCAN + # ifdef machine_arch_type + # undef machine_arch_type + # define machine_arch_type __machine_arch_type + # else +-# define machine_arch_type MACH_TYPE_ARCOM_MERCURY ++# define machine_arch_type MACH_TYPE_ARCOM_VULCAN + # endif +-# define machine_is_arcom_mercury() (machine_arch_type == MACH_TYPE_ARCOM_MERCURY) ++# define machine_is_arcom_vulcan() (machine_arch_type == MACH_TYPE_ARCOM_VULCAN) + #else +-# define machine_is_arcom_mercury() (0) ++# define machine_is_arcom_vulcan() (0) + #endif + + #ifdef CONFIG_MACH_STARGATE +@@ -6054,16 +6284,16 @@ + # define machine_is_ess710() (0) + #endif + +-#ifdef CONFIG_MACH_MX3ADS ++#ifdef CONFIG_MACH_MX31ADS + # ifdef machine_arch_type + # undef machine_arch_type + # define machine_arch_type __machine_arch_type + # else +-# define machine_arch_type MACH_TYPE_MX3ADS ++# define machine_arch_type MACH_TYPE_MX31ADS + # endif +-# define machine_is_mx3ads() (machine_arch_type == MACH_TYPE_MX3ADS) ++# define machine_is_mx31ads() (machine_arch_type == MACH_TYPE_MX31ADS) + #else +-# define machine_is_mx3ads() (0) ++# define machine_is_mx31ads() (0) + #endif + + #ifdef CONFIG_MACH_HIMALAYA +@@ -9402,6 +9632,2766 @@ + # define machine_is_mp2usb() (0) + #endif + ++#ifdef CONFIG_MACH_NTNP425C ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NTNP425C ++# endif ++# define machine_is_ntnp425c() (machine_arch_type == MACH_TYPE_NTNP425C) ++#else ++# define machine_is_ntnp425c() (0) ++#endif ++ ++#ifdef CONFIG_MACH_COLIBRI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_COLIBRI ++# endif ++# define machine_is_colibri() (machine_arch_type == MACH_TYPE_COLIBRI) ++#else ++# define machine_is_colibri() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PCM7220 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PCM7220 ++# endif ++# define machine_is_pcm7220() (machine_arch_type == MACH_TYPE_PCM7220) ++#else ++# define machine_is_pcm7220() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GATEWAY7001 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GATEWAY7001 ++# endif ++# define machine_is_gateway7001() (machine_arch_type == MACH_TYPE_GATEWAY7001) ++#else ++# define machine_is_gateway7001() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PCM027 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PCM027 ++# endif ++# define machine_is_pcm027() (machine_arch_type == MACH_TYPE_PCM027) ++#else ++# define machine_is_pcm027() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CMPXA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CMPXA ++# endif ++# define machine_is_cmpxa() (machine_arch_type == MACH_TYPE_CMPXA) ++#else ++# define machine_is_cmpxa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ANUBIS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ANUBIS ++# endif ++# define machine_is_anubis() (machine_arch_type == MACH_TYPE_ANUBIS) ++#else ++# define machine_is_anubis() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ITE8152 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ITE8152 ++# endif ++# define machine_is_ite8152() (machine_arch_type == MACH_TYPE_ITE8152) ++#else ++# define machine_is_ite8152() (0) ++#endif ++ ++#ifdef CONFIG_MACH_LPC3XXX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_LPC3XXX ++# endif ++# define machine_is_lpc3xxx() (machine_arch_type == MACH_TYPE_LPC3XXX) ++#else ++# define machine_is_lpc3xxx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PUPPETEER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PUPPETEER ++# endif ++# define machine_is_puppeteer() (machine_arch_type == MACH_TYPE_PUPPETEER) ++#else ++# define machine_is_puppeteer() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MACH_VADATECH ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MACH_VADATECH ++# endif ++# define machine_is_vt001() (machine_arch_type == MACH_TYPE_MACH_VADATECH) ++#else ++# define machine_is_vt001() (0) ++#endif ++ ++#ifdef CONFIG_MACH_E570 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_E570 ++# endif ++# define machine_is_e570() (machine_arch_type == MACH_TYPE_E570) ++#else ++# define machine_is_e570() (0) ++#endif ++ ++#ifdef CONFIG_MACH_X50 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_X50 ++# endif ++# define machine_is_x50() (machine_arch_type == MACH_TYPE_X50) ++#else ++# define machine_is_x50() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RECON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RECON ++# endif ++# define machine_is_recon() (machine_arch_type == MACH_TYPE_RECON) ++#else ++# define machine_is_recon() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XBOARDGP8 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XBOARDGP8 ++# endif ++# define machine_is_xboardgp8() (machine_arch_type == MACH_TYPE_XBOARDGP8) ++#else ++# define machine_is_xboardgp8() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FPIC2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FPIC2 ++# endif ++# define machine_is_fpic2() (machine_arch_type == MACH_TYPE_FPIC2) ++#else ++# define machine_is_fpic2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AKITA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AKITA ++# endif ++# define machine_is_akita() (machine_arch_type == MACH_TYPE_AKITA) ++#else ++# define machine_is_akita() (0) ++#endif ++ ++#ifdef CONFIG_MACH_A81 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_A81 ++# endif ++# define machine_is_a81() (machine_arch_type == MACH_TYPE_A81) ++#else ++# define machine_is_a81() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SVM_SC25X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SVM_SC25X ++# endif ++# define machine_is_svm_sc25x() (machine_arch_type == MACH_TYPE_SVM_SC25X) ++#else ++# define machine_is_svm_sc25x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_VADATECH020 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_VADATECH020 ++# endif ++# define machine_is_vt020() (machine_arch_type == MACH_TYPE_VADATECH020) ++#else ++# define machine_is_vt020() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TLI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TLI ++# endif ++# define machine_is_tli() (machine_arch_type == MACH_TYPE_TLI) ++#else ++# define machine_is_tli() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EDB9315LC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EDB9315LC ++# endif ++# define machine_is_edb9315lc() (machine_arch_type == MACH_TYPE_EDB9315LC) ++#else ++# define machine_is_edb9315lc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PASSEC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PASSEC ++# endif ++# define machine_is_passec() (machine_arch_type == MACH_TYPE_PASSEC) ++#else ++# define machine_is_passec() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DS_TIGER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DS_TIGER ++# endif ++# define machine_is_ds_tiger() (machine_arch_type == MACH_TYPE_DS_TIGER) ++#else ++# define machine_is_ds_tiger() (0) ++#endif ++ ++#ifdef CONFIG_MACH_E310 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_E310 ++# endif ++# define machine_is_e310() (machine_arch_type == MACH_TYPE_E310) ++#else ++# define machine_is_e310() (0) ++#endif ++ ++#ifdef CONFIG_MACH_E330 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_E330 ++# endif ++# define machine_is_e330() (machine_arch_type == MACH_TYPE_E330) ++#else ++# define machine_is_e330() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RT3000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RT3000 ++# endif ++# define machine_is_rt3000() (machine_arch_type == MACH_TYPE_RT3000) ++#else ++# define machine_is_rt3000() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NOKIA770 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NOKIA770 ++# endif ++# define machine_is_nokia770() (machine_arch_type == MACH_TYPE_NOKIA770) ++#else ++# define machine_is_nokia770() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PNX0106 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PNX0106 ++# endif ++# define machine_is_pnx0106() (machine_arch_type == MACH_TYPE_PNX0106) ++#else ++# define machine_is_pnx0106() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HX21XX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HX21XX ++# endif ++# define machine_is_hx21xx() (machine_arch_type == MACH_TYPE_HX21XX) ++#else ++# define machine_is_hx21xx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FARADAY ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FARADAY ++# endif ++# define machine_is_faraday() (machine_arch_type == MACH_TYPE_FARADAY) ++#else ++# define machine_is_faraday() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SBC9312 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SBC9312 ++# endif ++# define machine_is_sbc9312() (machine_arch_type == MACH_TYPE_SBC9312) ++#else ++# define machine_is_sbc9312() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BATMAN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BATMAN ++# endif ++# define machine_is_batman() (machine_arch_type == MACH_TYPE_BATMAN) ++#else ++# define machine_is_batman() (0) ++#endif ++ ++#ifdef CONFIG_MACH_JPD201 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_JPD201 ++# endif ++# define machine_is_jpd201() (machine_arch_type == MACH_TYPE_JPD201) ++#else ++# define machine_is_jpd201() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MIPSA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MIPSA ++# endif ++# define machine_is_mipsa() (machine_arch_type == MACH_TYPE_MIPSA) ++#else ++# define machine_is_mipsa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_KACOM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_KACOM ++# endif ++# define machine_is_kacom() (machine_arch_type == MACH_TYPE_KACOM) ++#else ++# define machine_is_kacom() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SWARCOCPU ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SWARCOCPU ++# endif ++# define machine_is_swarcocpu() (machine_arch_type == MACH_TYPE_SWARCOCPU) ++#else ++# define machine_is_swarcocpu() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SWARCODSL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SWARCODSL ++# endif ++# define machine_is_swarcodsl() (machine_arch_type == MACH_TYPE_SWARCODSL) ++#else ++# define machine_is_swarcodsl() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BLUEANGEL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BLUEANGEL ++# endif ++# define machine_is_blueangel() (machine_arch_type == MACH_TYPE_BLUEANGEL) ++#else ++# define machine_is_blueangel() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HAIRYGRAMA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HAIRYGRAMA ++# endif ++# define machine_is_hairygrama() (machine_arch_type == MACH_TYPE_HAIRYGRAMA) ++#else ++# define machine_is_hairygrama() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BANFF ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BANFF ++# endif ++# define machine_is_banff() (machine_arch_type == MACH_TYPE_BANFF) ++#else ++# define machine_is_banff() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CARMEVA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CARMEVA ++# endif ++# define machine_is_carmeva() (machine_arch_type == MACH_TYPE_CARMEVA) ++#else ++# define machine_is_carmeva() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SAM255 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SAM255 ++# endif ++# define machine_is_sam255() (machine_arch_type == MACH_TYPE_SAM255) ++#else ++# define machine_is_sam255() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PPM10 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PPM10 ++# endif ++# define machine_is_ppm10() (machine_arch_type == MACH_TYPE_PPM10) ++#else ++# define machine_is_ppm10() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EDB9315A ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EDB9315A ++# endif ++# define machine_is_edb9315a() (machine_arch_type == MACH_TYPE_EDB9315A) ++#else ++# define machine_is_edb9315a() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SUNSET ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SUNSET ++# endif ++# define machine_is_sunset() (machine_arch_type == MACH_TYPE_SUNSET) ++#else ++# define machine_is_sunset() (0) ++#endif ++ ++#ifdef CONFIG_MACH_STARGATE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_STARGATE2 ++# endif ++# define machine_is_stargate2() (machine_arch_type == MACH_TYPE_STARGATE2) ++#else ++# define machine_is_stargate2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_INTELMOTE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_INTELMOTE2 ++# endif ++# define machine_is_intelmote2() (machine_arch_type == MACH_TYPE_INTELMOTE2) ++#else ++# define machine_is_intelmote2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TRIZEPS4 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TRIZEPS4 ++# endif ++# define machine_is_trizeps4() (machine_arch_type == MACH_TYPE_TRIZEPS4) ++#else ++# define machine_is_trizeps4() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAINSTONE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAINSTONE2 ++# endif ++# define machine_is_mainstone2() (machine_arch_type == MACH_TYPE_MAINSTONE2) ++#else ++# define machine_is_mainstone2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EZ_IXP42X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EZ_IXP42X ++# endif ++# define machine_is_ez_ixp42x() (machine_arch_type == MACH_TYPE_EZ_IXP42X) ++#else ++# define machine_is_ez_ixp42x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TAPWAVE_ZODIAC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TAPWAVE_ZODIAC ++# endif ++# define machine_is_tapwave_zodiac() (machine_arch_type == MACH_TYPE_TAPWAVE_ZODIAC) ++#else ++# define machine_is_tapwave_zodiac() (0) ++#endif ++ ++#ifdef CONFIG_MACH_UNIVERSALMETER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_UNIVERSALMETER ++# endif ++# define machine_is_universalmeter() (machine_arch_type == MACH_TYPE_UNIVERSALMETER) ++#else ++# define machine_is_universalmeter() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HICOARM9 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HICOARM9 ++# endif ++# define machine_is_hicoarm9() (machine_arch_type == MACH_TYPE_HICOARM9) ++#else ++# define machine_is_hicoarm9() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PNX4008 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PNX4008 ++# endif ++# define machine_is_pnx4008() (machine_arch_type == MACH_TYPE_PNX4008) ++#else ++# define machine_is_pnx4008() (0) ++#endif ++ ++#ifdef CONFIG_MACH_KWS6000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_KWS6000 ++# endif ++# define machine_is_kws6000() (machine_arch_type == MACH_TYPE_KWS6000) ++#else ++# define machine_is_kws6000() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PORTUX920T ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PORTUX920T ++# endif ++# define machine_is_portux920t() (machine_arch_type == MACH_TYPE_PORTUX920T) ++#else ++# define machine_is_portux920t() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EZ_X5 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EZ_X5 ++# endif ++# define machine_is_ez_x5() (machine_arch_type == MACH_TYPE_EZ_X5) ++#else ++# define machine_is_ez_x5() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_RUDOLPH ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_RUDOLPH ++# endif ++# define machine_is_omap_rudolph() (machine_arch_type == MACH_TYPE_OMAP_RUDOLPH) ++#else ++# define machine_is_omap_rudolph() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CPUAT91 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CPUAT91 ++# endif ++# define machine_is_cpuat91() (machine_arch_type == MACH_TYPE_CPUAT91) ++#else ++# define machine_is_cpuat91() (0) ++#endif ++ ++#ifdef CONFIG_MACH_REA9200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_REA9200 ++# endif ++# define machine_is_rea9200() (machine_arch_type == MACH_TYPE_REA9200) ++#else ++# define machine_is_rea9200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ACTS_PUNE_SA1110 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ACTS_PUNE_SA1110 ++# endif ++# define machine_is_acts_pune_sa1110() (machine_arch_type == MACH_TYPE_ACTS_PUNE_SA1110) ++#else ++# define machine_is_acts_pune_sa1110() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXP425 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXP425 ++# endif ++# define machine_is_ixp425() (machine_arch_type == MACH_TYPE_IXP425) ++#else ++# define machine_is_ixp425() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ARGONPLUSODYSSEY ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ARGONPLUSODYSSEY ++# endif ++# define machine_is_argonplusodyssey() (machine_arch_type == MACH_TYPE_ARGONPLUSODYSSEY) ++#else ++# define machine_is_argonplusodyssey() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PERCH ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PERCH ++# endif ++# define machine_is_perch() (machine_arch_type == MACH_TYPE_PERCH) ++#else ++# define machine_is_perch() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EIS05R1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EIS05R1 ++# endif ++# define machine_is_eis05r1() (machine_arch_type == MACH_TYPE_EIS05R1) ++#else ++# define machine_is_eis05r1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PEPPERPAD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PEPPERPAD ++# endif ++# define machine_is_pepperpad() (machine_arch_type == MACH_TYPE_PEPPERPAD) ++#else ++# define machine_is_pepperpad() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SB3010 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SB3010 ++# endif ++# define machine_is_sb3010() (machine_arch_type == MACH_TYPE_SB3010) ++#else ++# define machine_is_sb3010() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RM9200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RM9200 ++# endif ++# define machine_is_rm9200() (machine_arch_type == MACH_TYPE_RM9200) ++#else ++# define machine_is_rm9200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DMA03 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DMA03 ++# endif ++# define machine_is_dma03() (machine_arch_type == MACH_TYPE_DMA03) ++#else ++# define machine_is_dma03() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ROAD_S101 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ROAD_S101 ++# endif ++# define machine_is_road_s101() (machine_arch_type == MACH_TYPE_ROAD_S101) ++#else ++# define machine_is_road_s101() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_A ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_A ++# endif ++# define machine_is_iq_nextgen_a() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_A) ++#else ++# define machine_is_iq_nextgen_a() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_B ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_B ++# endif ++# define machine_is_iq_nextgen_b() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_B) ++#else ++# define machine_is_iq_nextgen_b() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_C ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_C ++# endif ++# define machine_is_iq_nextgen_c() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_C) ++#else ++# define machine_is_iq_nextgen_c() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_D ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_D ++# endif ++# define machine_is_iq_nextgen_d() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_D) ++#else ++# define machine_is_iq_nextgen_d() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_E ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_E ++# endif ++# define machine_is_iq_nextgen_e() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_E) ++#else ++# define machine_is_iq_nextgen_e() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MALLOW_AT91 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MALLOW_AT91 ++# endif ++# define machine_is_mallow_at91() (machine_arch_type == MACH_TYPE_MALLOW_AT91) ++#else ++# define machine_is_mallow_at91() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CYBERTRACKER_I ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CYBERTRACKER_I ++# endif ++# define machine_is_cybertracker_i() (machine_arch_type == MACH_TYPE_CYBERTRACKER_I) ++#else ++# define machine_is_cybertracker_i() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GESBC931X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GESBC931X ++# endif ++# define machine_is_gesbc931x() (machine_arch_type == MACH_TYPE_GESBC931X) ++#else ++# define machine_is_gesbc931x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CENTIPAD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CENTIPAD ++# endif ++# define machine_is_centipad() (machine_arch_type == MACH_TYPE_CENTIPAD) ++#else ++# define machine_is_centipad() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ARMSOC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ARMSOC ++# endif ++# define machine_is_armsoc() (machine_arch_type == MACH_TYPE_ARMSOC) ++#else ++# define machine_is_armsoc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SE4200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SE4200 ++# endif ++# define machine_is_se4200() (machine_arch_type == MACH_TYPE_SE4200) ++#else ++# define machine_is_se4200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EMS197A ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EMS197A ++# endif ++# define machine_is_ems197a() (machine_arch_type == MACH_TYPE_EMS197A) ++#else ++# define machine_is_ems197a() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MICRO9 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MICRO9 ++# endif ++# define machine_is_micro9() (machine_arch_type == MACH_TYPE_MICRO9) ++#else ++# define machine_is_micro9() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MICRO9L ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MICRO9L ++# endif ++# define machine_is_micro9l() (machine_arch_type == MACH_TYPE_MICRO9L) ++#else ++# define machine_is_micro9l() (0) ++#endif ++ ++#ifdef CONFIG_MACH_UC5471DSP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_UC5471DSP ++# endif ++# define machine_is_uc5471dsp() (machine_arch_type == MACH_TYPE_UC5471DSP) ++#else ++# define machine_is_uc5471dsp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SJ5471ENG ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SJ5471ENG ++# endif ++# define machine_is_sj5471eng() (machine_arch_type == MACH_TYPE_SJ5471ENG) ++#else ++# define machine_is_sj5471eng() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CMPXA26X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CMPXA26X ++# endif ++# define machine_is_none() (machine_arch_type == MACH_TYPE_CMPXA26X) ++#else ++# define machine_is_none() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NC ++# endif ++# define machine_is_nc() (machine_arch_type == MACH_TYPE_NC) ++#else ++# define machine_is_nc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMTE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMTE ++# endif ++# define machine_is_omap_palmte() (machine_arch_type == MACH_TYPE_OMAP_PALMTE) ++#else ++# define machine_is_omap_palmte() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AJAX52X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AJAX52X ++# endif ++# define machine_is_ajax52x() (machine_arch_type == MACH_TYPE_AJAX52X) ++#else ++# define machine_is_ajax52x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SIRIUSTAR ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SIRIUSTAR ++# endif ++# define machine_is_siriustar() (machine_arch_type == MACH_TYPE_SIRIUSTAR) ++#else ++# define machine_is_siriustar() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IODATA_HDLG ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IODATA_HDLG ++# endif ++# define machine_is_iodata_hdlg() (machine_arch_type == MACH_TYPE_IODATA_HDLG) ++#else ++# define machine_is_iodata_hdlg() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91RM9200UTL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91RM9200UTL ++# endif ++# define machine_is_at91rm9200utl() (machine_arch_type == MACH_TYPE_AT91RM9200UTL) ++#else ++# define machine_is_at91rm9200utl() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BIOSAFE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BIOSAFE ++# endif ++# define machine_is_biosafe() (machine_arch_type == MACH_TYPE_BIOSAFE) ++#else ++# define machine_is_biosafe() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MP1000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MP1000 ++# endif ++# define machine_is_mp1000() (machine_arch_type == MACH_TYPE_MP1000) ++#else ++# define machine_is_mp1000() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PARSY ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PARSY ++# endif ++# define machine_is_parsy() (machine_arch_type == MACH_TYPE_PARSY) ++#else ++# define machine_is_parsy() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CCXP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CCXP ++# endif ++# define machine_is_ccxp270() (machine_arch_type == MACH_TYPE_CCXP) ++#else ++# define machine_is_ccxp270() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_GSAMPLE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_GSAMPLE ++# endif ++# define machine_is_omap_gsample() (machine_arch_type == MACH_TYPE_OMAP_GSAMPLE) ++#else ++# define machine_is_omap_gsample() (0) ++#endif ++ ++#ifdef CONFIG_MACH_REALVIEW_EB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_REALVIEW_EB ++# endif ++# define machine_is_realview_eb() (machine_arch_type == MACH_TYPE_REALVIEW_EB) ++#else ++# define machine_is_realview_eb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SAMOA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SAMOA ++# endif ++# define machine_is_samoa() (machine_arch_type == MACH_TYPE_SAMOA) ++#else ++# define machine_is_samoa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_T3XSCALE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_T3XSCALE ++# endif ++# define machine_is_t3xscale() (machine_arch_type == MACH_TYPE_T3XSCALE) ++#else ++# define machine_is_t3xscale() (0) ++#endif ++ ++#ifdef CONFIG_MACH_I878 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_I878 ++# endif ++# define machine_is_i878() (machine_arch_type == MACH_TYPE_I878) ++#else ++# define machine_is_i878() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BORZOI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BORZOI ++# endif ++# define machine_is_borzoi() (machine_arch_type == MACH_TYPE_BORZOI) ++#else ++# define machine_is_borzoi() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GECKO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GECKO ++# endif ++# define machine_is_gecko() (machine_arch_type == MACH_TYPE_GECKO) ++#else ++# define machine_is_gecko() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DS101 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DS101 ++# endif ++# define machine_is_ds101() (machine_arch_type == MACH_TYPE_DS101) ++#else ++# define machine_is_ds101() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMTT2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMTT2 ++# endif ++# define machine_is_omap_palmtt2() (machine_arch_type == MACH_TYPE_OMAP_PALMTT2) ++#else ++# define machine_is_omap_palmtt2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSCALE_PALMLD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSCALE_PALMLD ++# endif ++# define machine_is_xscale_palmld() (machine_arch_type == MACH_TYPE_XSCALE_PALMLD) ++#else ++# define machine_is_xscale_palmld() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CC9C ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CC9C ++# endif ++# define machine_is_cc9c() (machine_arch_type == MACH_TYPE_CC9C) ++#else ++# define machine_is_cc9c() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SBC1670 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SBC1670 ++# endif ++# define machine_is_sbc1670() (machine_arch_type == MACH_TYPE_SBC1670) ++#else ++# define machine_is_sbc1670() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXDP28X5 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXDP28X5 ++# endif ++# define machine_is_ixdp28x5() (machine_arch_type == MACH_TYPE_IXDP28X5) ++#else ++# define machine_is_ixdp28x5() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMTT ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMTT ++# endif ++# define machine_is_omap_palmtt() (machine_arch_type == MACH_TYPE_OMAP_PALMTT) ++#else ++# define machine_is_omap_palmtt() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ML696K ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ML696K ++# endif ++# define machine_is_ml696k() (machine_arch_type == MACH_TYPE_ML696K) ++#else ++# define machine_is_ml696k() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ARCOM_ZEUS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ARCOM_ZEUS ++# endif ++# define machine_is_arcom_zeus() (machine_arch_type == MACH_TYPE_ARCOM_ZEUS) ++#else ++# define machine_is_arcom_zeus() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OSIRIS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OSIRIS ++# endif ++# define machine_is_osiris() (machine_arch_type == MACH_TYPE_OSIRIS) ++#else ++# define machine_is_osiris() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAESTRO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAESTRO ++# endif ++# define machine_is_maestro() (machine_arch_type == MACH_TYPE_MAESTRO) ++#else ++# define machine_is_maestro() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TUNGE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TUNGE2 ++# endif ++# define machine_is_tunge2() (machine_arch_type == MACH_TYPE_TUNGE2) ++#else ++# define machine_is_tunge2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXBBM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXBBM ++# endif ++# define machine_is_ixbbm() (machine_arch_type == MACH_TYPE_IXBBM) ++#else ++# define machine_is_ixbbm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MX27 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MX27 ++# endif ++# define machine_is_mx27ads() (machine_arch_type == MACH_TYPE_MX27) ++#else ++# define machine_is_mx27ads() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AX8004 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AX8004 ++# endif ++# define machine_is_ax8004() (machine_arch_type == MACH_TYPE_AX8004) ++#else ++# define machine_is_ax8004() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91SAM9261EK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9261EK ++# endif ++# define machine_is_at91sam9261ek() (machine_arch_type == MACH_TYPE_AT91SAM9261EK) ++#else ++# define machine_is_at91sam9261ek() (0) ++#endif ++ ++#ifdef CONFIG_MACH_LOFT ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_LOFT ++# endif ++# define machine_is_loft() (machine_arch_type == MACH_TYPE_LOFT) ++#else ++# define machine_is_loft() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAGPIE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAGPIE ++# endif ++# define machine_is_magpie() (machine_arch_type == MACH_TYPE_MAGPIE) ++#else ++# define machine_is_magpie() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MX21 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MX21 ++# endif ++# define machine_is_mx21ads() (machine_arch_type == MACH_TYPE_MX21) ++#else ++# define machine_is_mx21ads() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MB87M3400 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MB87M3400 ++# endif ++# define machine_is_mb87m3400() (machine_arch_type == MACH_TYPE_MB87M3400) ++#else ++# define machine_is_mb87m3400() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MGUARD_DELTA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MGUARD_DELTA ++# endif ++# define machine_is_mguard_delta() (machine_arch_type == MACH_TYPE_MGUARD_DELTA) ++#else ++# define machine_is_mguard_delta() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DAVINCI_DVDP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DAVINCI_DVDP ++# endif ++# define machine_is_davinci_dvdp() (machine_arch_type == MACH_TYPE_DAVINCI_DVDP) ++#else ++# define machine_is_davinci_dvdp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HTCUNIVERSAL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HTCUNIVERSAL ++# endif ++# define machine_is_htcuniversal() (machine_arch_type == MACH_TYPE_HTCUNIVERSAL) ++#else ++# define machine_is_htcuniversal() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TPAD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TPAD ++# endif ++# define machine_is_tpad() (machine_arch_type == MACH_TYPE_TPAD) ++#else ++# define machine_is_tpad() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ROVERP3 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ROVERP3 ++# endif ++# define machine_is_roverp3() (machine_arch_type == MACH_TYPE_ROVERP3) ++#else ++# define machine_is_roverp3() (0) ++#endif ++ ++#ifdef CONFIG_MACH_JORNADA928 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_JORNADA928 ++# endif ++# define machine_is_jornada928() (machine_arch_type == MACH_TYPE_JORNADA928) ++#else ++# define machine_is_jornada928() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MV88FXX81 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MV88FXX81 ++# endif ++# define machine_is_mv88fxx81() (machine_arch_type == MACH_TYPE_MV88FXX81) ++#else ++# define machine_is_mv88fxx81() (0) ++#endif ++ ++#ifdef CONFIG_MACH_STMP36XX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_STMP36XX ++# endif ++# define machine_is_stmp36xx() (machine_arch_type == MACH_TYPE_STMP36XX) ++#else ++# define machine_is_stmp36xx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SXNI79524 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SXNI79524 ++# endif ++# define machine_is_sxni79524() (machine_arch_type == MACH_TYPE_SXNI79524) ++#else ++# define machine_is_sxni79524() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AMS_DELTA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AMS_DELTA ++# endif ++# define machine_is_ams_delta() (machine_arch_type == MACH_TYPE_AMS_DELTA) ++#else ++# define machine_is_ams_delta() (0) ++#endif ++ ++#ifdef CONFIG_MACH_URANIUM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_URANIUM ++# endif ++# define machine_is_uranium() (machine_arch_type == MACH_TYPE_URANIUM) ++#else ++# define machine_is_uranium() (0) ++#endif ++ ++#ifdef CONFIG_MACH_UCON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_UCON ++# endif ++# define machine_is_ucon() (machine_arch_type == MACH_TYPE_UCON) ++#else ++# define machine_is_ucon() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NAS100D ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NAS100D ++# endif ++# define machine_is_nas100d() (machine_arch_type == MACH_TYPE_NAS100D) ++#else ++# define machine_is_nas100d() (0) ++#endif ++ ++#ifdef CONFIG_MACH_L083_1000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_L083_1000 ++# endif ++# define machine_is_l083() (machine_arch_type == MACH_TYPE_L083_1000) ++#else ++# define machine_is_l083() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EZX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EZX ++# endif ++# define machine_is_ezx() (machine_arch_type == MACH_TYPE_EZX) ++#else ++# define machine_is_ezx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PNX5220 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PNX5220 ++# endif ++# define machine_is_pnx5220() (machine_arch_type == MACH_TYPE_PNX5220) ++#else ++# define machine_is_pnx5220() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BUTTE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BUTTE ++# endif ++# define machine_is_butte() (machine_arch_type == MACH_TYPE_BUTTE) ++#else ++# define machine_is_butte() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SRM2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SRM2 ++# endif ++# define machine_is_srm2() (machine_arch_type == MACH_TYPE_SRM2) ++#else ++# define machine_is_srm2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DSBR ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DSBR ++# endif ++# define machine_is_dsbr() (machine_arch_type == MACH_TYPE_DSBR) ++#else ++# define machine_is_dsbr() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CRYSTALBALL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CRYSTALBALL ++# endif ++# define machine_is_crystalball() (machine_arch_type == MACH_TYPE_CRYSTALBALL) ++#else ++# define machine_is_crystalball() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TINYPXA27X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TINYPXA27X ++# endif ++# define machine_is_tinypxa27x() (machine_arch_type == MACH_TYPE_TINYPXA27X) ++#else ++# define machine_is_tinypxa27x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HERBIE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HERBIE ++# endif ++# define machine_is_herbie() (machine_arch_type == MACH_TYPE_HERBIE) ++#else ++# define machine_is_herbie() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAGICIAN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAGICIAN ++# endif ++# define machine_is_magician() (machine_arch_type == MACH_TYPE_MAGICIAN) ++#else ++# define machine_is_magician() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CM4002 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CM4002 ++# endif ++# define machine_is_cm4002() (machine_arch_type == MACH_TYPE_CM4002) ++#else ++# define machine_is_cm4002() (0) ++#endif ++ ++#ifdef CONFIG_MACH_B4 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_B4 ++# endif ++# define machine_is_b4() (machine_arch_type == MACH_TYPE_B4) ++#else ++# define machine_is_b4() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAUI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAUI ++# endif ++# define machine_is_maui() (machine_arch_type == MACH_TYPE_MAUI) ++#else ++# define machine_is_maui() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CYBERTRACKER_G ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CYBERTRACKER_G ++# endif ++# define machine_is_cybertracker_g() (machine_arch_type == MACH_TYPE_CYBERTRACKER_G) ++#else ++# define machine_is_cybertracker_g() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NXDKN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NXDKN ++# endif ++# define machine_is_nxdkn() (machine_arch_type == MACH_TYPE_NXDKN) ++#else ++# define machine_is_nxdkn() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MIO8390 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MIO8390 ++# endif ++# define machine_is_mio8390() (machine_arch_type == MACH_TYPE_MIO8390) ++#else ++# define machine_is_mio8390() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMI_BOARD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMI_BOARD ++# endif ++# define machine_is_omi_board() (machine_arch_type == MACH_TYPE_OMI_BOARD) ++#else ++# define machine_is_omi_board() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MX21CIV ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MX21CIV ++# endif ++# define machine_is_mx21civ() (machine_arch_type == MACH_TYPE_MX21CIV) ++#else ++# define machine_is_mx21civ() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAHI_CDAC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAHI_CDAC ++# endif ++# define machine_is_mahi_cdac() (machine_arch_type == MACH_TYPE_MAHI_CDAC) ++#else ++# define machine_is_mahi_cdac() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSCALE_PALMTX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSCALE_PALMTX ++# endif ++# define machine_is_xscale_palmtx() (machine_arch_type == MACH_TYPE_XSCALE_PALMTX) ++#else ++# define machine_is_xscale_palmtx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_S3C2413 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_S3C2413 ++# endif ++# define machine_is_s3c2413() (machine_arch_type == MACH_TYPE_S3C2413) ++#else ++# define machine_is_s3c2413() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SAMSYS_EP0 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SAMSYS_EP0 ++# endif ++# define machine_is_samsys_ep0() (machine_arch_type == MACH_TYPE_SAMSYS_EP0) ++#else ++# define machine_is_samsys_ep0() (0) ++#endif ++ ++#ifdef CONFIG_MACH_WG302V1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_WG302V1 ++# endif ++# define machine_is_wg302v1() (machine_arch_type == MACH_TYPE_WG302V1) ++#else ++# define machine_is_wg302v1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_WG302V2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_WG302V2 ++# endif ++# define machine_is_wg302v2() (machine_arch_type == MACH_TYPE_WG302V2) ++#else ++# define machine_is_wg302v2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EB42X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EB42X ++# endif ++# define machine_is_eb42x() (machine_arch_type == MACH_TYPE_EB42X) ++#else ++# define machine_is_eb42x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ331ES ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ331ES ++# endif ++# define machine_is_iq331es() (machine_arch_type == MACH_TYPE_IQ331ES) ++#else ++# define machine_is_iq331es() (0) ++#endif ++ ++#ifdef CONFIG_MACH_COSYDSP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_COSYDSP ++# endif ++# define machine_is_cosydsp() (machine_arch_type == MACH_TYPE_COSYDSP) ++#else ++# define machine_is_cosydsp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_UPLAT7D ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_UPLAT7D ++# endif ++# define machine_is_uplat7d_proto() (machine_arch_type == MACH_TYPE_UPLAT7D) ++#else ++# define machine_is_uplat7d_proto() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PTDAVINCI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PTDAVINCI ++# endif ++# define machine_is_ptdavinci() (machine_arch_type == MACH_TYPE_PTDAVINCI) ++#else ++# define machine_is_ptdavinci() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MBUS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MBUS ++# endif ++# define machine_is_mbus() (machine_arch_type == MACH_TYPE_MBUS) ++#else ++# define machine_is_mbus() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NADIA2VB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NADIA2VB ++# endif ++# define machine_is_nadia2vb() (machine_arch_type == MACH_TYPE_NADIA2VB) ++#else ++# define machine_is_nadia2vb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_R1000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_R1000 ++# endif ++# define machine_is_r1000() (machine_arch_type == MACH_TYPE_R1000) ++#else ++# define machine_is_r1000() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HW90250 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HW90250 ++# endif ++# define machine_is_hw90250() (machine_arch_type == MACH_TYPE_HW90250) ++#else ++# define machine_is_hw90250() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_2430SDP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_2430SDP ++# endif ++# define machine_is_omap_2430sdp() (machine_arch_type == MACH_TYPE_OMAP_2430SDP) ++#else ++# define machine_is_omap_2430sdp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DAVINCI_EVM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DAVINCI_EVM ++# endif ++# define machine_is_davinci_evm() (machine_arch_type == MACH_TYPE_DAVINCI_EVM) ++#else ++# define machine_is_davinci_evm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_TORNADO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_TORNADO ++# endif ++# define machine_is_omap_tornado() (machine_arch_type == MACH_TYPE_OMAP_TORNADO) ++#else ++# define machine_is_omap_tornado() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OLOCREEK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OLOCREEK ++# endif ++# define machine_is_olocreek() (machine_arch_type == MACH_TYPE_OLOCREEK) ++#else ++# define machine_is_olocreek() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PALMZ72 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PALMZ72 ++# endif ++# define machine_is_palmz72() (machine_arch_type == MACH_TYPE_PALMZ72) ++#else ++# define machine_is_palmz72() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NXDB500 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NXDB500 ++# endif ++# define machine_is_nxdb500() (machine_arch_type == MACH_TYPE_NXDB500) ++#else ++# define machine_is_nxdb500() (0) ++#endif ++ ++#ifdef CONFIG_MACH_APF9328 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_APF9328 ++# endif ++# define machine_is_apf9328() (machine_arch_type == MACH_TYPE_APF9328) ++#else ++# define machine_is_apf9328() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_WIPOQ ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_WIPOQ ++# endif ++# define machine_is_omap_wipoq() (machine_arch_type == MACH_TYPE_OMAP_WIPOQ) ++#else ++# define machine_is_omap_wipoq() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_TWIP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_TWIP ++# endif ++# define machine_is_omap_twip() (machine_arch_type == MACH_TYPE_OMAP_TWIP) ++#else ++# define machine_is_omap_twip() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSCALE_PALMTREO650 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSCALE_PALMTREO650 ++# endif ++# define machine_is_xscale_treo650() (machine_arch_type == MACH_TYPE_XSCALE_PALMTREO650) ++#else ++# define machine_is_xscale_treo650() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ACUMEN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ACUMEN ++# endif ++# define machine_is_acumen() (machine_arch_type == MACH_TYPE_ACUMEN) ++#else ++# define machine_is_acumen() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XP100 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XP100 ++# endif ++# define machine_is_xp100() (machine_arch_type == MACH_TYPE_XP100) ++#else ++# define machine_is_xp100() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FS2410 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FS2410 ++# endif ++# define machine_is_fs2410() (machine_arch_type == MACH_TYPE_FS2410) ++#else ++# define machine_is_fs2410() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PXA270_CERF ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PXA270_CERF ++# endif ++# define machine_is_pxa270_cerf() (machine_arch_type == MACH_TYPE_PXA270_CERF) ++#else ++# define machine_is_pxa270_cerf() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SQ2FTLPALM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SQ2FTLPALM ++# endif ++# define machine_is_sq2ftlpalm() (machine_arch_type == MACH_TYPE_SQ2FTLPALM) ++#else ++# define machine_is_sq2ftlpalm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BSEMSERVER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BSEMSERVER ++# endif ++# define machine_is_bsemserver() (machine_arch_type == MACH_TYPE_BSEMSERVER) ++#else ++# define machine_is_bsemserver() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NETCLIENT ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NETCLIENT ++# endif ++# define machine_is_netclient() (machine_arch_type == MACH_TYPE_NETCLIENT) ++#else ++# define machine_is_netclient() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSCALE_PALMTT5 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSCALE_PALMTT5 ++# endif ++# define machine_is_xscale_palmtt5() (machine_arch_type == MACH_TYPE_XSCALE_PALMTT5) ++#else ++# define machine_is_xscale_palmtt5() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMTC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMTC ++# endif ++# define machine_is_xscale_palmtc() (machine_arch_type == MACH_TYPE_OMAP_PALMTC) ++#else ++# define machine_is_xscale_palmtc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_APOLLON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_APOLLON ++# endif ++# define machine_is_omap_apollon() (machine_arch_type == MACH_TYPE_OMAP_APOLLON) ++#else ++# define machine_is_omap_apollon() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ARGONLVEVB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ARGONLVEVB ++# endif ++# define machine_is_argonlvevb() (machine_arch_type == MACH_TYPE_ARGONLVEVB) ++#else ++# define machine_is_argonlvevb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_REA_2D ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_REA_2D ++# endif ++# define machine_is_rea_2d() (machine_arch_type == MACH_TYPE_REA_2D) ++#else ++# define machine_is_rea_2d() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TI3E524 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TI3E524 ++# endif ++# define machine_is_eti3e524() (machine_arch_type == MACH_TYPE_TI3E524) ++#else ++# define machine_is_eti3e524() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ATEB9200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ATEB9200 ++# endif ++# define machine_is_ateb9200() (machine_arch_type == MACH_TYPE_ATEB9200) ++#else ++# define machine_is_ateb9200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AUCKLAND ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AUCKLAND ++# endif ++# define machine_is_auckland() (machine_arch_type == MACH_TYPE_AUCKLAND) ++#else ++# define machine_is_auckland() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AK3320M ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AK3320M ++# endif ++# define machine_is_ak3220m() (machine_arch_type == MACH_TYPE_AK3320M) ++#else ++# define machine_is_ak3220m() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DURAMAX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DURAMAX ++# endif ++# define machine_is_duramax() (machine_arch_type == MACH_TYPE_DURAMAX) ++#else ++# define machine_is_duramax() (0) ++#endif ++ ++#ifdef CONFIG_MACH_N35 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_N35 ++# endif ++# define machine_is_n35() (machine_arch_type == MACH_TYPE_N35) ++#else ++# define machine_is_n35() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PRONGHORN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PRONGHORN ++# endif ++# define machine_is_pronghorn() (machine_arch_type == MACH_TYPE_PRONGHORN) ++#else ++# define machine_is_pronghorn() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FUNDY ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FUNDY ++# endif ++# define machine_is_fundy() (machine_arch_type == MACH_TYPE_FUNDY) ++#else ++# define machine_is_fundy() (0) ++#endif ++ ++#ifdef CONFIG_MACH_LOGICPD_PXA270 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_LOGICPD_PXA270 ++# endif ++# define machine_is_logicpd_pxa270() (machine_arch_type == MACH_TYPE_LOGICPD_PXA270) ++#else ++# define machine_is_logicpd_pxa270() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CPU777 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CPU777 ++# endif ++# define machine_is_cpu777() (machine_arch_type == MACH_TYPE_CPU777) ++#else ++# define machine_is_cpu777() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SIMICON9201 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SIMICON9201 ++# endif ++# define machine_is_simicon9201() (machine_arch_type == MACH_TYPE_SIMICON9201) ++#else ++# define machine_is_simicon9201() (0) ++#endif ++ ++#ifdef CONFIG_MACH_LEAP2_HPM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_LEAP2_HPM ++# endif ++# define machine_is_leap2_hpm() (machine_arch_type == MACH_TYPE_LEAP2_HPM) ++#else ++# define machine_is_leap2_hpm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CM922TXA10 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CM922TXA10 ++# endif ++# define machine_is_cm922txa10() (machine_arch_type == MACH_TYPE_CM922TXA10) ++#else ++# define machine_is_cm922txa10() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PXA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PXA ++# endif ++# define machine_is_sandgate() (machine_arch_type == MACH_TYPE_PXA) ++#else ++# define machine_is_sandgate() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SANDGATE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SANDGATE2 ++# endif ++# define machine_is_sandgate2() (machine_arch_type == MACH_TYPE_SANDGATE2) ++#else ++# define machine_is_sandgate2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SANDGATE2G ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SANDGATE2G ++# endif ++# define machine_is_sandgate2g() (machine_arch_type == MACH_TYPE_SANDGATE2G) ++#else ++# define machine_is_sandgate2g() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SANDGATE2P ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SANDGATE2P ++# endif ++# define machine_is_sandgate2p() (machine_arch_type == MACH_TYPE_SANDGATE2P) ++#else ++# define machine_is_sandgate2p() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FRED_JACK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FRED_JACK ++# endif ++# define machine_is_fred_jack() (machine_arch_type == MACH_TYPE_FRED_JACK) ++#else ++# define machine_is_fred_jack() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TTG_COLOR1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TTG_COLOR1 ++# endif ++# define machine_is_ttg_color1() (machine_arch_type == MACH_TYPE_TTG_COLOR1) ++#else ++# define machine_is_ttg_color1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NXEB500HMI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NXEB500HMI ++# endif ++# define machine_is_nxeb500hmi() (machine_arch_type == MACH_TYPE_NXEB500HMI) ++#else ++# define machine_is_nxeb500hmi() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NETDCU8 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NETDCU8 ++# endif ++# define machine_is_netdcu8() (machine_arch_type == MACH_TYPE_NETDCU8) ++#else ++# define machine_is_netdcu8() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ML675050_CPU_BOA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ML675050_CPU_BOA ++# endif ++# define machine_is_ml675050_cpu_boa() (machine_arch_type == MACH_TYPE_ML675050_CPU_BOA) ++#else ++# define machine_is_ml675050_cpu_boa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NG_FVX538 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NG_FVX538 ++# endif ++# define machine_is_ng_fvx538() (machine_arch_type == MACH_TYPE_NG_FVX538) ++#else ++# define machine_is_ng_fvx538() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NG_FVS338 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NG_FVS338 ++# endif ++# define machine_is_ng_fvs338() (machine_arch_type == MACH_TYPE_NG_FVS338) ++#else ++# define machine_is_ng_fvs338() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PNX4103 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PNX4103 ++# endif ++# define machine_is_pnx4103() (machine_arch_type == MACH_TYPE_PNX4103) ++#else ++# define machine_is_pnx4103() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HESDB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HESDB ++# endif ++# define machine_is_hesdb() (machine_arch_type == MACH_TYPE_HESDB) ++#else ++# define machine_is_hesdb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSILO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSILO ++# endif ++# define machine_is_xsilo() (machine_arch_type == MACH_TYPE_XSILO) ++#else ++# define machine_is_xsilo() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ESPRESSO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ESPRESSO ++# endif ++# define machine_is_espresso() (machine_arch_type == MACH_TYPE_ESPRESSO) ++#else ++# define machine_is_espresso() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EMLC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EMLC ++# endif ++# define machine_is_emlc() (machine_arch_type == MACH_TYPE_EMLC) ++#else ++# define machine_is_emlc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SISTERON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SISTERON ++# endif ++# define machine_is_sisteron() (machine_arch_type == MACH_TYPE_SISTERON) ++#else ++# define machine_is_sisteron() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RX1950 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RX1950 ++# endif ++# define machine_is_rx1950() (machine_arch_type == MACH_TYPE_RX1950) ++#else ++# define machine_is_rx1950() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TSC_VENUS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TSC_VENUS ++# endif ++# define machine_is_tsc_venus() (machine_arch_type == MACH_TYPE_TSC_VENUS) ++#else ++# define machine_is_tsc_venus() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DS101J ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DS101J ++# endif ++# define machine_is_ds101j() (machine_arch_type == MACH_TYPE_DS101J) ++#else ++# define machine_is_ds101j() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MXC30030ADS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MXC30030ADS ++# endif ++# define machine_is_mxc300_30ads() (machine_arch_type == MACH_TYPE_MXC30030ADS) ++#else ++# define machine_is_mxc300_30ads() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FUJITSU_WIMAXSOC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FUJITSU_WIMAXSOC ++# endif ++# define machine_is_fujitsu_wimaxsoc() (machine_arch_type == MACH_TYPE_FUJITSU_WIMAXSOC) ++#else ++# define machine_is_fujitsu_wimaxsoc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DUALPCMODEM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DUALPCMODEM ++# endif ++# define machine_is_dualpcmodem() (machine_arch_type == MACH_TYPE_DUALPCMODEM) ++#else ++# define machine_is_dualpcmodem() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GESBC9312 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GESBC9312 ++# endif ++# define machine_is_gesbc9312() (machine_arch_type == MACH_TYPE_GESBC9312) ++#else ++# define machine_is_gesbc9312() (0) ++#endif ++ + /* + * These have not yet been registered + */ +diff -ru u-boot-1.1.6.orig/include/lcd.h u-boot-1.1.6/include/lcd.h +--- u-boot-1.1.6.orig/include/lcd.h 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/include/lcd.h 2007-01-16 14:44:09.000000000 +0100 +@@ -77,7 +77,7 @@ + + extern vidinfo_t panel_info; + +-#elif defined CONFIG_PXA250 ++#elif (defined CONFIG_PXA250 || defined CONFIG_PXA27X) + /* + * PXA LCD DMA descriptor + */ +diff -ru u-boot-1.1.6.orig/lib_arm/board.c u-boot-1.1.6/lib_arm/board.c +--- u-boot-1.1.6.orig/lib_arm/board.c 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/lib_arm/board.c 2007-01-16 14:51:11.000000000 +0100 +@@ -146,6 +146,14 @@ + return (0); + } + ++#if defined (CONFIG_BOARDINFO) ++static int show_boardinfo (void) ++{ ++ printf("Board: %s\n",CONFIG_BOARDINFO); ++ return 0; ++} ++#endif ++ + /* + * WARNING: this code looks "cleaner" than the PowerPC version, but + * has the disadvantage that you either get nothing, or everything. +@@ -228,6 +236,9 @@ + #if defined(CONFIG_DISPLAY_BOARDINFO) + checkboard, /* display board info */ + #endif ++#if defined (CONFIG_BOARDINFO) ++ show_boardinfo, ++#endif + dram_init, /* configure available RAM banks */ + display_dram_config, + NULL, +diff -ru u-boot-1.1.6.orig/Makefile u-boot-1.1.6/Makefile +--- u-boot-1.1.6.orig/Makefile 2006-11-02 15:15:01.000000000 +0100 ++++ u-boot-1.1.6/Makefile 2007-01-16 14:44:09.000000000 +0100 +@@ -122,10 +122,10 @@ + CROSS_COMPILE = + else + ifeq ($(ARCH),ppc) +-CROSS_COMPILE = powerpc-linux- ++CROSS_COMPILE = powerpc-unknown-linux-gnu- + endif + ifeq ($(ARCH),arm) +-CROSS_COMPILE = arm-linux- ++CROSS_COMPILE = arm-softfloat-linux-gnu- + endif + ifeq ($(ARCH),i386) + ifeq ($(HOSTARCH),i386) +@@ -220,7 +220,6 @@ + # The "tools" are needed early, so put this first + # Don't include stuff already done in $(LIBS) + SUBDIRS = tools \ +- examples \ + post \ + post/cpu + .PHONY : $(SUBDIRS) +@@ -2016,6 +2015,9 @@ + pxa255_idp_config: unconfig + @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp + ++phycore_pxa270_config : unconfig ++ @./mkconfig $(@:_config=) arm pxa phycore_pxa270 ++ + wepep250_config : unconfig + @$(MKCONFIG) $(@:_config=) arm pxa wepep250 + +Index: board/phycore_pxa270/config.mk +=================================================================== +--- /dev/null ++++ b/board/phycore_pxa270/config.mk +@@ -0,0 +1,10 @@ ++# ++# This is config used for compilation of WEP EP250 sources ++# ++# You might change location of U-Boot in memory by setting right TEXT_BASE. ++# This allows for example having one copy located at the end of ram and stored ++# in flash device and later on while developing use other location to test ++# the code in RAM device only. ++# ++ ++TEXT_BASE = 0xa1fd0000 +Index: board/phycore_pxa270/lowlevel_init.S +=================================================================== +--- /dev/null ++++ b/board/phycore_pxa270/lowlevel_init.S +@@ -0,0 +1,466 @@ ++/* ++ * This was originally from the Lubbock u-boot port. ++ * ++ * Most of this taken from Redboot hal_platform_setup.h with cleanup ++ * ++ * NOTE: I haven't clean this up considerably, just enough to get it ++ * running. See hal_platform_setup.h for the source. See ++ * board/cradle/lowlevel_init.S for another PXA250 setup that is ++ * much cleaner. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++ ++/* wait for coprocessor write complete */ ++ .macro CPWAIT reg ++ mrc p15,0,\reg,c2,c0,0 ++ mov \reg,\reg ++ sub pc,pc,#4 ++ .endm ++ ++ ++/* ++ * Memory setup ++ */ ++ ++.globl lowlevel_init ++lowlevel_init: ++ ++ /* Set up GPIO pins first ----------------------------------------- */ ++ ++ ldr r0, =GPSR0 ++ ldr r1, =CFG_GPSR0_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPSR1 ++ ldr r1, =CFG_GPSR1_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPSR2 ++ ldr r1, =CFG_GPSR2_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPSR3 ++ ldr r1, =CFG_GPSR3_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPCR0 ++ ldr r1, =CFG_GPCR0_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPCR1 ++ ldr r1, =CFG_GPCR1_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPCR2 ++ ldr r1, =CFG_GPCR2_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPCR3 ++ ldr r1, =CFG_GPCR3_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPDR0 ++ ldr r1, =CFG_GPDR0_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPDR1 ++ ldr r1, =CFG_GPDR1_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPDR2 ++ ldr r1, =CFG_GPDR2_VAL ++ str r1, [r0] ++ ++ ldr r0, =GPDR3 ++ ldr r1, =CFG_GPDR3_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR0_L ++ ldr r1, =CFG_GAFR0_L_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR0_U ++ ldr r1, =CFG_GAFR0_U_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR1_L ++ ldr r1, =CFG_GAFR1_L_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR1_U ++ ldr r1, =CFG_GAFR1_U_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR2_L ++ ldr r1, =CFG_GAFR2_L_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR2_U ++ ldr r1, =CFG_GAFR2_U_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR3_L ++ ldr r1, =CFG_GAFR3_L_VAL ++ str r1, [r0] ++ ++ ldr r0, =GAFR3_U ++ ldr r1, =CFG_GAFR3_U_VAL ++ str r1, [r0] ++ ++ ldr r0, =PSSR /* enable GPIO pins */ ++ ldr r1, =CFG_PSSR_VAL ++ str r1, [r0] ++ ++ /* ---------------------------------------------------------------- */ ++ /* Enable memory interface */ ++ /* */ ++ /* The sequence below is based on the recommended init steps */ ++ /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ ++ /* Chapter 10. */ ++ /* ---------------------------------------------------------------- */ ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 1: Wait for at least 200 microsedonds to allow internal */ ++ /* clocks to settle. Only necessary after hard reset... */ ++ /* FIXME: can be optimized later */ ++ /* ---------------------------------------------------------------- */ ++ ++ ldr r3, =OSCR /* reset the OS Timer Count to zero */ ++ mov r2, #0 ++ str r2, [r3] ++ ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ ++ /* so 0x300 should be plenty */ ++1: ++ ldr r2, [r3] ++ cmp r4, r2 ++ bgt 1b ++ ++mem_init: ++ ++ ldr r1, =MEMC_BASE /* get memory controller base addr. */ ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 2a: Initialize Asynchronous static memory controller */ ++ /* ---------------------------------------------------------------- */ ++ ++ /* MSC registers: timing, bus width, mem type */ ++ ++ /* MSC0: nCS(0,1) */ ++ ldr r2, =CFG_MSC0_VAL ++ str r2, [r1, #MSC0_OFFSET] ++ ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ ++ /* that data latches */ ++ /* MSC1: nCS(2,3) */ ++ ldr r2, =CFG_MSC1_VAL ++ str r2, [r1, #MSC1_OFFSET] ++ ldr r2, [r1, #MSC1_OFFSET] ++ ++ /* MSC2: nCS(4,5) */ ++ ldr r2, =CFG_MSC2_VAL ++ str r2, [r1, #MSC2_OFFSET] ++ ldr r2, [r1, #MSC2_OFFSET] ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 2b: Initialize Card Interface */ ++ /* ---------------------------------------------------------------- */ ++ ++ /* MECR: Memory Expansion Card Register */ ++ ldr r2, =CFG_MECR_VAL ++ str r2, [r1, #MECR_OFFSET] ++ ldr r2, [r1, #MECR_OFFSET] ++ ++ /* MCMEM0: Card Interface slot 0 timing */ ++ ldr r2, =CFG_MCMEM0_VAL ++ str r2, [r1, #MCMEM0_OFFSET] ++ ldr r2, [r1, #MCMEM0_OFFSET] ++ ++ /* MCMEM1: Card Interface slot 1 timing */ ++ ldr r2, =CFG_MCMEM1_VAL ++ str r2, [r1, #MCMEM1_OFFSET] ++ ldr r2, [r1, #MCMEM1_OFFSET] ++ ++ /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ ++ ldr r2, =CFG_MCATT0_VAL ++ str r2, [r1, #MCATT0_OFFSET] ++ ldr r2, [r1, #MCATT0_OFFSET] ++ ++ /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ ++ ldr r2, =CFG_MCATT1_VAL ++ str r2, [r1, #MCATT1_OFFSET] ++ ldr r2, [r1, #MCATT1_OFFSET] ++ ++ /* MCIO0: Card Interface I/O Space Timing, slot 0 */ ++ ldr r2, =CFG_MCIO0_VAL ++ str r2, [r1, #MCIO0_OFFSET] ++ ldr r2, [r1, #MCIO0_OFFSET] ++ ++ /* MCIO1: Card Interface I/O Space Timing, slot 1 */ ++ ldr r2, =CFG_MCIO1_VAL ++ str r2, [r1, #MCIO1_OFFSET] ++ ldr r2, [r1, #MCIO1_OFFSET] ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 2c: Write FLYCNFG FIXME: what's that??? */ ++ /* ---------------------------------------------------------------- */ ++ ldr r2, =CFG_FLYCNFG_VAL ++ str r2, [r1, #FLYCNFG_OFFSET] ++ str r2, [r1, #FLYCNFG_OFFSET] ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ ++ /* ---------------------------------------------------------------- */ ++ ++ /* Before accessing MDREFR we need a valid DRI field, so we set */ ++ /* this to power on defaults + DRI field. */ ++ ++ ldr r4, [r1, #MDREFR_OFFSET] ++ ldr r2, =0xFFF ++ bic r4, r4, r2 ++ ++ ldr r3, =CFG_MDREFR_VAL ++ and r3, r3, r2 ++ ++ orr r4, r4, r3 ++ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ ++ ++ orr r4, r4, #MDREFR_K0RUN ++ orr r4, r4, #MDREFR_K0DB4 ++ orr r4, r4, #MDREFR_K0FREE ++ orr r4, r4, #MDREFR_K2FREE ++ orr r4, r4, #MDREFR_K0DB2 ++ orr r4, r4, #MDREFR_K1DB2 ++ bic r4, r4, #MDREFR_K1FREE ++ ++ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ ++ ldr r4, [r1, #MDREFR_OFFSET] ++ ++ /* Note: preserve the mdrefr value in r4 */ ++ ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ ++ /* ---------------------------------------------------------------- */ ++ ++ /* Initialize SXCNFG register. Assert the enable bits */ ++ ++ /* Write SXMRS to cause an MRS command to all enabled banks of */ ++ /* synchronous static memory. Note that SXLCR need not be written */ ++ /* at this time. */ ++ ++ ldr r2, =CFG_SXCNFG_VAL ++ str r2, [r1, #SXCNFG_OFFSET] ++ ++ /* ---------------------------------------------------------------- */ ++ /* Step 4: Initialize SDRAM */ ++ /* ---------------------------------------------------------------- */ ++ ++ bic r4, r4, #(MDREFR_K1FREE | MDREFR_K0FREE) ++ ++ orr r4, r4, #MDREFR_K1RUN ++ orr r4, r4, #MDREFR_K2FREE ++ bic r4, r4, #MDREFR_K2DB2 ++ str r4, [r1, #MDREFR_OFFSET] ++ ldr r4, [r1, #MDREFR_OFFSET] ++ ++ bic r4, r4, #MDREFR_SLFRSH ++ str r4, [r1, #MDREFR_OFFSET] ++ ldr r4, [r1, #MDREFR_OFFSET] ++ ++ orr r4, r4, #MDREFR_E1PIN ++ str r4, [r1, #MDREFR_OFFSET] ++ ldr r4, [r1, #MDREFR_OFFSET] ++ ++ nop ++ nop ++ ++ ++ /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ ++ /* configure but not enable each SDRAM partition pair. */ ++ ++ ldr r4, =CFG_MDCNFG_VAL ++ bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) ++ bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) ++ ++ str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ ++ ldr r4, [r1, #MDCNFG_OFFSET] ++ ++ ++ /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ ++ /* 100..200 µsec. */ ++ ++ ldr r3, =OSCR /* reset the OS Timer Count to zero */ ++ mov r2, #0 ++ str r2, [r3] ++ ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ ++ /* so 0x300 should be plenty */ ++1: ++ ldr r2, [r3] ++ cmp r4, r2 ++ bgt 1b ++ ++ ++ /* Step 4f: Trigger a number (usually 8) refresh cycles by */ ++ /* attempting non-burst read or write accesses to disabled */ ++ /* SDRAM, as commonly specified in the power up sequence */ ++ /* documented in SDRAM data sheets. The address(es) used */ ++ /* for this purpose must not be cacheable. */ ++ ++ ldr r3, =CFG_DRAM_BASE ++ str r2, [r3] ++ str r2, [r3] ++ str r2, [r3] ++ str r2, [r3] ++ str r2, [r3] ++ str r2, [r3] ++ str r2, [r3] ++ str r2, [r3] ++ ++ ++ /* Step 4g: Write MDCNFG with enable bits asserted */ ++ /* (MDCNFG:DEx set to 1). */ ++ ++ ldr r3, [r1, #MDCNFG_OFFSET] ++ mov r4, r3 ++ orr r3, r3, #MDCNFG_DE0 ++ str r3, [r1, #MDCNFG_OFFSET] ++ mov r0, r3 ++ ++ /* Step 4h: Write MDMRS. */ ++ ++ ldr r2, =CFG_MDMRS_VAL ++ str r2, [r1, #MDMRS_OFFSET] ++ ++ /* enable APD */ ++ ldr r3, [r1, #MDREFR_OFFSET] ++ orr r3, r3, #MDREFR_APD ++ str r3, [r1, #MDREFR_OFFSET] ++ ++ /* We are finished with Intel's memory controller initialisation */ ++ ++setvoltage: ++ ++ ++ mov r10, lr ++ bl initPXAvoltage /* In case the board is rebooting with a */ ++ mov lr, r10 /* low voltage raise it up to a good one. */ ++ ++wakeup: ++ /* Are we waking from sleep? */ ++ ldr r0, =RCSR ++ ldr r1, [r0] ++ and r1, r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) ++ str r1, [r0] ++ teq r1, #RCSR_SMR ++ ++ bne initirqs ++ ++ ldr r0, =PSSR ++ mov r1, #PSSR_PH ++ str r1, [r0] ++ ++ /* if so, resume at PSPR */ ++ ldr r0, =PSPR ++ ldr r1, [r0] ++ mov pc, r1 ++ ++ /* ---------------------------------------------------------------- */ ++ /* Disable (mask) all interrupts at interrupt controller */ ++ /* ---------------------------------------------------------------- */ ++ ++initirqs: ++ ++ mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ ++ ldr r2, =ICLR ++ str r1, [r2] ++ ++ ldr r2, =ICMR /* mask all interrupts at the controller */ ++ str r1, [r2] ++ ++ /* ---------------------------------------------------------------- */ ++ /* Clock initialisation */ ++ /* ---------------------------------------------------------------- */ ++ ++initclks: ++ ++ /* Disable the peripheral clocks, and set the core clock frequency */ ++ ++ /* Turn Off on-chip peripheral clocks (except for memory) */ ++ /* for re-configuration. */ ++ ldr r1, =CKEN ++ ldr r2, =CFG_CKEN ++ str r2, [r1] ++ ++ /* ... and write the core clock config register */ ++ ldr r2, =CFG_CCCR ++ ldr r1, =CCCR ++ str r2, [r1] ++ ++ /* Turn on turbo mode */ ++ mrc p14, 0, r2, c6, c0, 0 ++ orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/ ++ mcr p14, 0, r2, c6, c0, 0 ++ ++ /* Re-write MDREFR */ ++ ldr r1, =MEMC_BASE ++ ldr r2, [r1, #MDREFR_OFFSET] ++ str r2, [r1, #MDREFR_OFFSET] ++ ++ /* enable the 32Khz oscillator for RTC and PowerManager */ ++ ldr r1, =OSCC ++ mov r2, #OSCC_OON ++ str r2, [r1] ++ ++ /* NOTE: Other boards wait here for the pll to become stable */ ++ /* I think the pll can do without us (sha) */ ++ ++ /* Interrupt init: Mask all interrupts */ ++ ldr r0, =ICMR /* enable no sources */ ++ mov r1, #0 ++ str r1, [r0] ++ /* FIXME */ ++ ++#ifdef NODEBUG ++ /*Disable software and data breakpoints */ ++ mov r0,#0 ++ mcr p15,0,r0,c14,c8,0 /* ibcr0 */ ++ mcr p15,0,r0,c14,c9,0 /* ibcr1 */ ++ mcr p15,0,r0,c14,c4,0 /* dbcon */ ++ ++ /*Enable all debug functionality */ ++ mov r0,#0x80000000 ++ mcr p14,0,r0,c10,c0,0 /* dcsr */ ++#endif ++ ++ /* ---------------------------------------------------------------- */ ++ /* End lowlevel_init */ ++ /* ---------------------------------------------------------------- */ ++ ++endlowlevel_init: ++#if 0 ++ ldr r0,=GPDR2 ++ ldr r1,=CFG_GPDR2_VAL ++ and r1,r1,#0xFBFFFFFF /* switch off LED0 (GPIO 90) */ ++ str r1,[r0] ++#endif ++ mov pc, lr +Index: board/phycore_pxa270/Makefile +=================================================================== +--- /dev/null ++++ b/board/phycore_pxa270/Makefile +@@ -0,0 +1,47 @@ ++# ++# (C) Copyright 2000, 2002 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS := $(BOARD).o pcmcia.o mmc.o flash.o ++SOBJS := lowlevel_init.o pxavoltage.o ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) crv $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++-include .depend ++ ++######################################################################### +Index: board/phycore_pxa270/mmc.c +=================================================================== +--- /dev/null ++++ b/board/phycore_pxa270/mmc.c +@@ -0,0 +1,34 @@ ++/* ++ * (C) Copyright 2005 ++ * Juergen Kilb, Phytec Messtechnik GmbH, armlinux@phytec.de ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include "phycore_pxa270.h" ++ ++void mmc_power_on(void) ++{ ++ /* MMC2 Power at PCM985 */ ++ __PHYCORE_PXA270_CTRL_REG(PHYCORE_PXA270_CTRL_PHYS + PHYCORE_PXA270_CTRL_REG5) = ++ PHYCORE_PXA270_CTRL_MMC2PWR + PHYCORE_PXA270_CTRL_MMC2LED; ++ ++} +\ No newline at end of file +Index: board/phycore_pxa270/phycore_pxa270.c +=================================================================== +--- /dev/null ++++ b/board/phycore_pxa270/phycore_pxa270.c +@@ -0,0 +1,110 @@ ++/* ++ * Copyright (C) 2003 ETC s.r.o. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ * Written by Peter Figuli , 2003. ++ * ++ */ ++ ++#include ++#include ++#include "phycore_pxa270.h" ++ ++int board_init( void ){ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ icache_enable(); ++ ++ gd->bd->bi_arch_number = MACH_TYPE_PCM027; ++ gd->bd->bi_boot_params = 0xa0000100; ++ gd->bd->bi_baudrate = CONFIG_BAUDRATE; ++#if (PHYCORE_PXA270_USE_IDE==1) ++ /* IDE Drive */ ++ /* Enable IDE Latches */ ++ __PHYCORE_PXA270_IDE_PLD_REG(PHYCORE_PXA270_IDE_PLD_PHYS + PHYCORE_PXA270_IDE_PLD_REG3) = ++ PHYCORE_PXA270_IDE_IDEOE + PHYCORE_PXA270_IDE_IDEON + PHYCORE_PXA270_IDE_IDEIN; ++ ++ /* Enable Power */ ++ __PHYCORE_PXA270_IDE_PLD_REG(PHYCORE_PXA270_IDE_PLD_PHYS + PHYCORE_PXA270_IDE_PLD_REG4) = ++ PHYCORE_PXA270_IDE_PWRENA; ++ ++ /* Some harddisks need some time for it's initialization. ++ * Therefore the next delay of 5s. */ ++#endif ++ ++#if (PHYCORE_PXA270_USE_LCD==1) ++ /* LCD Display */ ++ /* Enable LCD and Power */ ++ __PHYCORE_PXA270_CTRL_REG(PHYCORE_PXA270_CTRL_PHYS + PHYCORE_PXA270_CTRL_REG3) = ++ PHYCORE_PXA270_CTRL_LCDPWR + PHYCORE_PXA270_CTRL_LCDON; ++#endif ++ return 0; ++} ++ ++/** ++ * i2c_init_board - reset i2c bus. When the board is powercycled during a ++ * bus transfer it might hang; for details see doc/I2C_Edge_Conditions. ++ * The Phytec board has GPIO117 connected to SCLK which can be toggled ++ * until all chips think that their current cycles are finished. ++ */ ++int i2c_init_board(void) ++{ ++ int i, icr; ++ ++ /* disable I2C controller first, otherwhise it thinks we want to */ ++ /* talk to the slave port... */ ++ icr = ICR; ++ ICR &= ~(ICR_SCLE | ICR_IUE); ++ ++ /* set gpio pin low _before_ we change direction to output */ ++ GPCR(117) = GPIO_bit(117); ++ ++ /* now toggle between output=low and high-impedance */ ++ for (i = 0; i < 20; i++) { ++ GPDR(117) |= GPIO_bit(117); /* output */ ++ udelay(10); ++ GPDR(117) &= ~GPIO_bit(117); /* input */ ++ udelay(10); ++ } ++ ++ ICR = icr; ++ ++ return 0; ++} ++ ++int board_late_init(void) ++{ ++ setenv ("stdout","serial"); ++ setenv ("stdout","serial"); ++ return 0; ++} ++ ++int dram_init( void ){ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++#if ( CONFIG_NR_DRAM_BANKS > 0 ) ++ gd->bd->bi_dram[0].start = CFG_SDRAM_1; ++ gd->bd->bi_dram[0].size = CFG_SDRAM_1_SIZE; ++#endif ++#if ( CONFIG_NR_DRAM_BANKS > 1 ) ++ gd->bd->bi_dram[1].start = CFG_SDRAM_2; ++ gd->bd->bi_dram[1].size = CFG_SDRAM_2_SIZE; ++#endif ++ ++ return 0; ++} ++ +Index: board/phycore_pxa270/phycore_pxa270.h +=================================================================== +--- /dev/null ++++ b/board/phycore_pxa270/phycore_pxa270.h +@@ -0,0 +1,262 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/phycore_pxa270.h ++ * ++ * (c) 2003 Phytec Messtechnik GmbH ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/* ++ * GPIOs Interrupt Source ++ */ ++//#define GPIO_PHYCORE_PXA270_RTC 0 /* GPIO-0 bei Baseboard über GPIO 1 WAKEUP erreichbar */ ++#define GPIO_PHYCORE_PXA270_WAKEUP 1 /* GPIO-1 INT-24 */ ++#define GPIO_PHYCORE_PXA270_ETH 2 /* GPIO-2 INT-25 */ ++#define GPIO_PHYCORE_PXA270_USB_INT1 3 /* GPIO-3 INT-26 */ ++#define GPIO_PHYCORE_PXA270_USB_INT2 4 /* GPIO-4 INT-27 */ ++#define GPIO_PHYCORE_PXA270_CAN 5 /* GPIO-5 INT-28 */ ++#define GPIO_PCM990_CAN0 83 /* GPIO-82 INT-106 */ ++#define GPIO_PCM990_CAN1 81 /* GPIO-81 INT-104 */ ++ ++#define GPIO_PHYCORE_PXA270_CTRL_INT 7 /* GPIO-7 INT-30 */ ++ ++#define GPIO_PHYCORE_PXA270_AC97 10 /* GPIO-10 INT-33 */ ++#define GPIO_PHYCORE_PXA270_CF 11 /* GPIO-11 INT-34 */ ++ ++#define GPIO_PHYCORE_PXA270_IDE 13 /* GPIO-13 INT-36 */ ++#define GPIO_PHYCORE_PXA270_CTRL_PWR 14 /* GPIO-14 INT-37 */ ++ ++/* ++ * ethernet chip (SMSC91C111) ++ */ ++#define PHYCORE_PXA270_ETH_PHYS PXA_CS5_PHYS ++#define PHYCORE_PXA270_ETH_BASE (0xf0000000) /* phys 0x14000000 */ ++#define PHYCORE_PXA270_ETH_SIZE (1*1024*1024) ++#define PHYCORE_PXA270_ETH_IRQ IRQ_GPIO(GPIO_PHYCORE_PXA270_ETH) ++#define PHYCORE_PXA270_ETH_IRQ_EDGE GPIO_RISING_EDGE ++ ++/* ++ * Control PLD Regs ++ */ ++ ++#define PHYCORE_PXA270_CTRL_PHYS 0x04000000 //16-Bit ++#define PHYCORE_PXA270_CTRL_SIZE (1*1024*1024) ++#define PHYCORE_PXA270_CTRL_INT_IRQ IRQ_GPIO(GPIO_PHYCORE_PXA270_CTRL_INT) ++#define PHYCORE_PXA270_CTRL_PWR_IRQ IRQ_GPIO(GPIO_PHYCORE_PXA270_CTRL_PWR) ++#define PHYCORE_PXA270_CTRL_IRQ_EDGE GPIO_FALLING_EDGE ++ ++//#define PHYCORE_PXA270_CTRL_REG0 0x00000000 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0001 /* RESET REGISTER */ ^[C ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_REG1 0x00000002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0001 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_REG2 0x00000004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0001 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* RESET REGISTER */ ++#define PHYCORE_PXA270_CTRL_REG3 0x00000006 /* LCD CTRL REGISTER 3 */ ++#define PHYCORE_PXA270_CTRL_LCDPWR 0x0001 /* RW LCD Power on */ ++#define PHYCORE_PXA270_CTRL_LCDON 0x0002 /* RW LCD Latch on */ ++#define PHYCORE_PXA270_CTRL_LCDPOS1 0x0004 /* RW POS 1 */ ++#define PHYCORE_PXA270_CTRL_LCDPOS2 0x0008 /* RW POS 2 */ ++#define PHYCORE_PXA270_CTRL_REG4 0x00000008 /* MMC1 CTRL REGISTER 4 */ ++#define PHYCORE_PXA270_CTRL_MMC1PWR 0x0001 /* RW MMC1 Power on */ ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* R=0 not used */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* R=0 not used */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* R=0 not used */ ++#define PHYCORE_PXA270_CTRL_REG5 0x0000000A /* MMC2 CTRL REGISTER 5 */ ++#define PHYCORE_PXA270_CTRL_MMC2PWR 0x0001 /* RW MMC2 Power on */ ++#define PHYCORE_PXA270_CTRL_MMC2LED 0x0002 /* RW MMC2 LED */ ++#define PHYCORE_PXA270_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */ ++#define PHYCORE_PXA270_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */ ++//#define PHYCORE_PXA270_CTRL_REG6 0x0000000C /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0001 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_REG7 0x0000000E /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0001 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_REG8 0x00000010 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0001 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_REG9 0x00000012 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0001 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_REG10 0x00000014 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0001 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_REG11 0x00000016 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0001 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_REG12 0x00000018 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0001 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_REG13 0x0000001A /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0001 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_REG14 0x0000001C /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0001 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0002 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0004 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_ 0x0008 /* RESET REGISTER */ ++//#define PHYCORE_PXA270_CTRL_REG15 0x0000001E /* RESET REGISTER */ ++ ++ ++#define __PHYCORE_PXA270_CTRL_REG(x) (*((volatile unsigned char *)(x))) ++ ++/* ++ * IDE ++ */ ++ ++#define PHYCORE_PXA270_IDE_IRQ IRQ_GPIO(GPIO_PHYCORE_PXA270_IDE) ++#define PHYCORE_PXA270_IDE_IRQ_EDGE GPIO_RISING_EDGE ++ ++#define PHYCORE_PXA270_IDE_PLD_PHYS 0x20000000 /* 16-Bit Zugriff */ ++#define PHYCORE_PXA270_IDE_PLD_BASE 0xf6000000 ++#define PHYCORE_PXA270_IDE_PLD_SIZE (1*1024*1024) ++ ++#define PHYCORE_PXA270_IDE_PLD_REG0 0x00001000 /* OFFSET IDE REGISTER 0 */ ++/*#define PHYCORE_PXA270_IDE_ 0x0001*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_IDE_ 0x0002*/ /* R=0 not used */ ++#define PHYCORE_PXA270_IDE_PM5V 0x0004 /* R System VCC_5V */ ++#define PHYCORE_PXA270_IDE_STBY 0x0008 /* R System StandBy */ ++ ++#define PHYCORE_PXA270_IDE_PLD_REG1 0x00001002 /* OFFSET IDE REGISTER 1 */ ++#define PHYCORE_PXA270_IDE_IDEMODE 0x0001 /* R TrueIDE Mode */ ++/*#define PHYCORE_PXA270_IDE_ 0x0002*/ /* R=0 not used */ ++#define PHYCORE_PXA270_IDE_DMAENA 0x0004 /* RW DMA Enable */ ++#define PHYCORE_PXA270_IDE_DMA1_0 0x0008 /* RW 1=DREQ1 0=DREQ0 */ ++ ++#define PHYCORE_PXA270_IDE_PLD_REG2 0x00001004 /* OFFSET IDE REGISTER 2 */ ++#define PHYCORE_PXA270_IDE_RESENA 0x0001 /* RW IDE Reset Bit enable */ ++#define PHYCORE_PXA270_IDE_RES 0x0002 /* RW IDE Reset Bit */ ++/*#define PHYCORE_PXA270_IDE_ 0x0004*/ /* R=0 */ ++#define PHYCORE_PXA270_IDE_RDY 0x0008 /* RDY */ ++ ++#define PHYCORE_PXA270_IDE_PLD_REG3 0x00001006 /* OFFSET IDE REGISTER 3 */ ++#define PHYCORE_PXA270_IDE_IDEOE 0x0001 /* RW Latch on Databus */ ++#define PHYCORE_PXA270_IDE_IDEON 0x0002 /* RW Latch on Control Address */ ++#define PHYCORE_PXA270_IDE_IDEIN 0x0004 /* RW Latch on Interrupt usw. */ ++/*#define PHYCORE_PXA270_IDE_ 0x0008*/ /* R=0 not used */ ++ ++#define PHYCORE_PXA270_IDE_PLD_REG4 0x00001008 /* OFFSET IDE REGISTER 4 */ ++#define PHYCORE_PXA270_IDE_PWRENA 0x0001 /* RW IDE Power enable */ ++#define PHYCORE_PXA270_IDE_5V 0x0002 /* R IDE Power 5V */ ++/*#define PHYCORE_PXA270_IDE_ 0x0004*/ /* R=0 not used */ ++#define PHYCORE_PXA270_IDE_PWG 0x0008 /* R IDE Power is on */ ++ ++/*#define PHYCORE_PXA270_IDE_PLD_REG5 0x0000100E*/ /* OFFSET IDE REGISTER 5 */ ++/*#define PHYCORE_PXA270_IDE_REG5_ 0x0004*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_IDE_REG5_ 0x0008*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_IDE_REG5_ 0x0004*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_IDE_REG5_ 0x0008*/ /* R=0 not used */ ++ ++/*#define PHYCORE_PXA270_IDE_PLD_REG6 0x00001010*/ /* OFFSET IDE REGISTER 6 */ ++/*#define PHYCORE_PXA270_IDE_REG6_ 0x0004*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_IDE_REG6_ 0x0008*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_IDE_REG6_ 0x0004*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_IDE_REG6_ 0x0008*/ /* R=0 not used */ ++ ++/*#define PHYCORE_PXA270_IDE_PLD_REG7 0x00001012*/ /* OFFSET IDE REGISTER 7 */ ++/*#define PHYCORE_PXA270_IDE_REG7_ 0x0004*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_IDE_REG7_ 0x0008*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_IDE_REG7_ 0x0004*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_IDE_REG7_ 0x0008*/ /* R=0 not used */ ++ ++ ++#define __PHYCORE_PXA270_IDE_PLD_REG(x) (*((volatile unsigned char *)(x))) ++ ++/* ++ * Compact Flash ++ */ ++#define PHYCORE_PXA270_CF_IRQ IRQ_GPIO(GPIO_PHYCORE_PXA270_CF) ++#define PHYCORE_PXA270_CF_IRQ_EDGE GPIO_RISING_EDGE ++ ++ ++#define PHYCORE_PXA270_CF_PLD_PHYS 0x30001000 //16-Bit ++#define PHYCORE_PXA270_CF_PLD_SIZE (1*1024*1024) ++ ++#define PHYCORE_PXA270_CF_PLD_REG0 0x00000000 /* OFFSET CF REGISTER 0 */ ++#define PHYCORE_PXA270_CF_REG0_LED 0x0001 /* RW LED an */ ++#define PHYCORE_PXA270_CF_REG0_BLK 0x0002 /* RW LED Blink bei Zugriff */ ++#define PHYCORE_PXA270_CF_REG0_PM5V 0x0004 /* R System VCC_5V an */ ++#define PHYCORE_PXA270_CF_REG0_STBY 0x0008 /* R System StandBy */ ++ ++#define PHYCORE_PXA270_CF_PLD_REG1 0x00000002 /* OFFSET CF REGISTER 1 */ ++#define PHYCORE_PXA270_CF_REG1_IDEMODE 0x0001 /* RW CF-Card als TrueIDE */ ++#define PHYCORE_PXA270_CF_REG1_CF0 0x0002 /* RW CF-Card auf ADDR 0x28000000 */ ++/*#define PHYCORE_PXA270_CF_REG1_ 0x0004*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_CF_REG1_ 0x0008*/ /* R=0 not used */ ++ ++#define PHYCORE_PXA270_CF_PLD_REG2 0x00000004 /* OFFSET CF REGISTER 2 */ ++#define PHYCORE_PXA270_CF_REG2_RESENA 0x0001 /* RW CF RESET BIT Enable */ ++#define PHYCORE_PXA270_CF_REG2_RES 0x0002 /* RW CF RESET BIT */ ++#define PHYCORE_PXA270_CF_REG2_RDYENA 0x0004 /* RW Enabele CF_RDY */ ++#define PHYCORE_PXA270_CF_REG2_RDY 0x0008 /* R CF_RDY auf PWAIT */ ++ ++#define PHYCORE_PXA270_CF_PLD_REG3 0x00000006 /* OFFSET CF REGISTER 3 */ ++#define PHYCORE_PXA270_CF_REG3_CFOE 0x0001 /* RW Latch on Databus */ ++#define PHYCORE_PXA270_CF_REG3_CFON 0x0002 /* RW Latch on Control Address */ ++#define PHYCORE_PXA270_CF_REG3_CFIN 0x0004 /* RW Latch on Interrupt usw. */ ++#define PHYCORE_PXA270_CF_REG3_CFCD 0x0008 /* RW Latch on CD1/2 VS1/2 usw */ ++ ++#define PHYCORE_PXA270_CF_PLD_REG4 0x00000008 /* OFFSET CF REGISTER 4 */ ++#define PHYCORE_PXA270_CF_REG4_PWRENA 0x0001 /* RW CF Power on (CD1/2 = "00") */ ++#define PHYCORE_PXA270_CF_REG4_5_3V 0x0002 /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */ ++#define PHYCORE_PXA270_CF_REG4_3B 0x0004 /* RW 3.0V Backup aus VCC (5_3V=0) */ ++#define PHYCORE_PXA270_CF_REG4_PWG 0x0008 /* R CF-Power is on */ ++ ++#define PHYCORE_PXA270_CF_PLD_REG5 0x0000000A /* OFFSET CF REGISTER 5 */ ++#define PHYCORE_PXA270_CF_REG5_BVD1 0x0001 /* R CF /BVD1 */ ++#define PHYCORE_PXA270_CF_REG5_BVD2 0x0002 /* R CF /BVD2 */ ++#define PHYCORE_PXA270_CF_REG5_VS1 0x0004 /* R CF /VS1 */ ++#define PHYCORE_PXA270_CF_REG5_VS2 0x0008 /* R CF /VS2 */ ++ ++#define PHYCORE_PXA270_CF_PLD_REG6 0x0000000C /* OFFSET CF REGISTER 6 */ ++#define PHYCORE_PXA270_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */ ++#define PHYCORE_PXA270_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */ ++/*#define PHYCORE_PXA270_CF_REG1_ 0x0004*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_CF_REG1_ 0x0008*/ /* R=0 not used */ ++ ++/*#define PHYCORE_PXA270_CF_PLD_REG7 0x0000000E*/ /* OFFSET CF REGISTER 7 */ ++/*#define PHYCORE_PXA270_CF_REG7_ 0x0004*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_CF_REG7_ 0x0008*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_CF_REG7_ 0x0004*/ /* R=0 not used */ ++/*#define PHYCORE_PXA270_CF_REG7_ 0x0008*/ /* R=0 not used */ ++ ++ ++#define __PHYCORE_PXA270_CF_PLD_REG(x) (*((volatile unsigned char *)(x))) ++ +Index: board/phycore_pxa270/pcmcia.c +=================================================================== +--- /dev/null ++++ b/board/phycore_pxa270/pcmcia.c +@@ -0,0 +1,75 @@ ++/* ++ * (C) Copyright 2004 ++ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include "phycore_pxa270.h" ++ ++void pcmcia_power_on(void) ++{ ++ /* CF Drive */ ++ /* switch to true-IDE Mode */ ++ __PHYCORE_PXA270_CF_PLD_REG(PHYCORE_PXA270_CF_PLD_PHYS + PHYCORE_PXA270_CF_PLD_REG1) = ++ PHYCORE_PXA270_CF_REG1_IDEMODE; ++ /* reset CF-Card */ ++ __PHYCORE_PXA270_CF_PLD_REG(PHYCORE_PXA270_CF_PLD_PHYS + PHYCORE_PXA270_CF_PLD_REG2) = ++ PHYCORE_PXA270_CF_REG2_RESENA + PHYCORE_PXA270_CF_REG2_RES;; ++ /* Enable Power */ ++ __PHYCORE_PXA270_CF_PLD_REG(PHYCORE_PXA270_CF_PLD_PHYS + PHYCORE_PXA270_CF_PLD_REG4) = ++ PHYCORE_PXA270_CF_REG4_PWRENA; ++ /* Enable CF Latches */ ++ __PHYCORE_PXA270_CF_PLD_REG(PHYCORE_PXA270_CF_PLD_PHYS + PHYCORE_PXA270_CF_PLD_REG3) = ++ PHYCORE_PXA270_CF_REG3_CFOE + PHYCORE_PXA270_CF_REG3_CFON ++ + PHYCORE_PXA270_CF_REG3_CFIN + PHYCORE_PXA270_CF_REG3_CFCD; ++ ++ /* release reset from CF-Card */ ++ udelay(10000); ++ __PHYCORE_PXA270_CF_PLD_REG(PHYCORE_PXA270_CF_PLD_PHYS + PHYCORE_PXA270_CF_PLD_REG2) = ++ PHYCORE_PXA270_CF_REG2_RESENA; ++ udelay(10000); ++} ++ ++void pcmcia_power_off(void) ++{ ++ /* CF Drive */ ++ /* reset CF-Card */ ++ __PHYCORE_PXA270_CF_PLD_REG(PHYCORE_PXA270_CF_PLD_PHYS + PHYCORE_PXA270_CF_PLD_REG2) = ++ PHYCORE_PXA270_CF_REG2_RESENA + PHYCORE_PXA270_CF_REG2_RES;; ++ /* Disable CF Latches */ ++ __PHYCORE_PXA270_CF_PLD_REG(PHYCORE_PXA270_CF_PLD_PHYS + PHYCORE_PXA270_CF_PLD_REG3) = 0; ++ /* Disable Power */ ++ __PHYCORE_PXA270_CF_PLD_REG(PHYCORE_PXA270_CF_PLD_PHYS + PHYCORE_PXA270_CF_PLD_REG4) = 0; ++} ++ ++void ide_led(uchar led, uchar status) ++{ ++ if (status) ++ { ++ /* CF-Led on */ ++ __PHYCORE_PXA270_CF_PLD_REG(PHYCORE_PXA270_CF_PLD_PHYS + PHYCORE_PXA270_CF_PLD_REG0) = 1; ++ } else ++ { ++ /* CF-Led off */ ++ __PHYCORE_PXA270_CF_PLD_REG(PHYCORE_PXA270_CF_PLD_PHYS + PHYCORE_PXA270_CF_PLD_REG0) = 0; ++ } ++} +\ No newline at end of file +Index: board/phycore_pxa270/pxavoltage.S +=================================================================== +--- /dev/null ++++ b/board/phycore_pxa270/pxavoltage.S +@@ -0,0 +1,170 @@ ++/* ++ * (C) Copyright 2004 ++ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#define LTC1663_ADDR 0x0C ++ ++#define VOLT_1_50 0x0D /* DAC value for 1.50V */ ++ ++ .global initPXAvoltage ++ ++@ Set the voltage to 1.55V early in the boot process so we can run ++@ at a high clock speed and boot quickly. Note that this is necessary ++@ because the reset button does not reset the CPU voltage, so if the ++@ voltage was low (say 0.85V) then the CPU would crash without this ++@ routine ++ ++@ This routine clobbers r0-r4 ++ ++initializei2c: ++ ++ ldr r2, =CKEN ++ ldr r3, [r2] ++ orr r3, r3, #CKEN15_PWRI2C ++ str r3, [r2] ++ ++ ldr r2, =PCFR ++ ldr r3, [r2] ++ orr r3, r3, #PCFR_PI2C_EN ++ str r3, [r2] ++ ++ /* delay for about 250msec ++ */ ++ ldr r3, =OSCR ++ mov r2, #0 ++ str r2, [r3] ++ ldr r1, =0xC0000 ++1: ++ ldr r2, [r3] ++ cmp r1, r2 ++ bgt 1b ++ /* end delay */ ++ ++ ldr r0, =PWRICR ++ ldr r1, [r0] ++ bic r1, r1, #(ICR_MA | ICR_START | ICR_STOP) ++ str r1, [r0] ++ ++ orr r1, r1, #ICR_UR /* Reset Pi2C Unit */ ++ str r1, [r0] ++ ++ ldr r2, =PWRISR /* clear all interrupts */ ++ ldr r3, =0x7ff ++ str r3, [r2] ++ ++ bic r1, r1, #ICR_UR /* clear PI2C reset bit in PWRICR (r0) */ ++ str r1, [r0] ++ ++ mov r1, #(ICR_GCD | ICR_SCLE) /* disable general call and enable SCL */ ++ str r1, [r0] ++ ++ orr r1, r1, #ICR_IUE /* enable PI2C unit */ ++ str r1, [r0] ++ ++ orr r1, r1, #ICR_FM /* use 160kbps */ ++ str r1, [r0] ++ ++ /* delay for about 1msec ++ */ ++ ldr r3, =OSCR ++ mov r2, #0 ++ str r2, [r3] ++ ldr r1, =0xC00 @11,32msec ++ ++1: ++ ldr r2, [r3] ++ cmp r1, r2 ++ bgt 1b ++ /* end delay */ ++ ++ mov pc, lr ++ ++sendbytei2c: ++ ldr r3, =PWRIDBR ++ str r0, [r3] ++ ldr r3, =PWRICR ++ ldr r0, [r3] ++ orr r0, r0, r1 ++ bic r0, r0, r2 ++ str r0, [r3] ++ orr r0, r0, #ICR_TB ++ str r0, [r3] ++ ++ mov r2, #0x100 ++ ++waitfortxemptyi2c: ++ ++ ldr r0, =PWRISR ++ ldr r1, [r0] ++ ++ /* take it from the top if we don't get empty after a while */ ++ subs r2, r2, #1 ++ moveq lr, r4 ++ beq initPXAvoltage ++ ++ tst r1, #ISR_ITE ++ ++ beq waitfortxemptyi2c ++ ++ orr r1, r1, #ISR_ITE ++ str r1, [r0] ++ ++ mov pc, lr ++ ++initPXAvoltage: ++ ++ mov r4, lr ++ ++ bl initializei2c ++ ++ /* now send the real message to set the correct voltage */ ++ ldr r0, =LTC1663_ADDR ++ mov r0, r0, LSL #1 ++ mov r1, #ICR_START /* set bits in ICR */ ++ ldr r2, =(ICR_STOP | ICR_ALDIE | ICR_ACKNAK) /* clear Bits in ICR */ ++ bl sendbytei2c ++ ++ ldr r0, =VOLT_1_50 ++ and r0, r0, #0xff ++ ldr r1, =(ICR_STOP | ICR_ALDIE) ++ mov r2, #ICR_START ++ bl sendbytei2c ++ ++ ldr r0,=GPDR2 ++ ldr r1,=CFG_GPDR2_VAL ++ and r1,r1,#0xFBFFFFFF /* switch off LED0 (GPIO 90) */ ++ str r1,[r0] ++ ++ @ delay a little for the volatage to stablize ++ ldr r3, =OSCR ++ mov r2, #0 ++ str r2, [r3] ++ ldr r1, =0xC0c ++ ++1: ++ ldr r2, [r3] ++ cmp r1, r2 ++ bgt 1b ++ mov pc, r4 ++ +Index: board/phycore_pxa270/u-boot.lds +=================================================================== +--- /dev/null ++++ b/board/phycore_pxa270/u-boot.lds +@@ -0,0 +1,56 @@ ++/* ++ * (C) Copyright 2000 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/pxa/start.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +Index: include/configs/phycore_pxa270.h +=================================================================== +--- /dev/null ++++ b/include/configs/phycore_pxa270.h +@@ -0,0 +1,901 @@ ++/* ++ * Copyright (C) 2005 Phytec Messtechnik GmbH ++ * Juergen Kilb, H. Klaholz ++ * ++ * Copyright (C) 2006 Pengutronix ++ * Sascha Hauer ++ * Robert Schwebel ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#define CONFIG_BOARDINFO "Phytec phyCORE-pxa270" ++ ++/* ++ * phyCORE-PXA270 configuration settings ++ * Set these to 0/1 to enable or disable the features. ++ */ ++ ++#define PHYCORE_PXA270_USE_LCD 1 ++#define PHYCORE_PXA270_USE_MMC 1 ++#define PHYCORE_PXA270_USE_IDE 0 ++#define PHYCORE_PXA270_USE_CF 1 ++#define PHYCORE_PXA270_USE_FFUART 1 ++#define PHYCORE_PXA270_USE_BTUART 1 ++#define PHYCORE_PXA270_USE_IRUART 1 ++#define PHYCORE_PXA270_USE_AC97 1 ++#define PHYCORE_PXA270_USE_SSP 1 ++#define PHYCORE_PXA270_USE_SSP3 1 ++#define PHYCORE_PXA270_USE_K3FLASH 0 ++ ++/* 260 MHz or 520 MHZ */ ++#define PHYCORE_PXA270_SPEED 520 ++ ++/********************************************************************* ++ * CONFIG PXA270 GPIO settings * ++ *********************************************************************/ ++#if PHYCORE_PXA270_USE_LCD == 1 ++/** REG GPSR0 ++ * GP16 is 1 */ ++#define GPSR0_LCD 0x00010000 /* GPIO16 is 1 */ ++/** REG GPDR0 ++ * GP16 == PWM0 is output ++ ** REG GPDR1 ++ * GP58 == LDD0 is output ++ * GP59 == LDD1 is output ++ * GP60 == LDD2 is output ++ * GP61 == LDD3 is output ++ * GP62 == LDD4 is output ++ * GP63 == LDD5 is output ++ *** REG GPDR2 ++ * GP64 == LDD6 is output ++ * GP65 == LDD7 is output ++ * GP66 == LDD8 is output ++ * GP67 == LDD9 is output ++ * GP68 == LDD10 is output ++ * GP69 == LDD11 is output ++ * GP70 == LDD12 is output ++ * GP71 == LDD13 is output ++ * GP72 == LDD14 is output ++ * GP73 == LDD15 is output ++ * GP74 == LCDFCLK is output ++ * GP75 == LCDLCLK is output ++ * GP76 == LCDPCLK is output ++ * GP77 == LCDBIAS is output */ ++#define GPDR0_LCD 0x00010000 /* GPIO 16 Output */ ++#define GPDR1_LCD 0xFC000000 /* GPIO 58 - 63 Output */ ++#define GPDR2_LCD 0x00003FFF /* GPIO 64 - 77 Output */ ++#define GAFR1_U_LCD 0xAAA00000 /* GPIO 58 - 63 AF 02 */ ++#define GAFR2_L_LCD 0x0AAAAAAA /* GPIO 64 - 77 AF 02 */ ++#else ++#define GPDR0_LCD 0x00000000 ++#define GPSR0_LCD 0x00000000 ++#define GPDR1_LCD 0x00000000 ++#define GPDR2_LCD 0x00000000 ++#define GAFR1_U_LCD 0x00000000 ++#define GAFR2_L_LCD 0x00000000 ++#endif ++ ++#if PHYCORE_PXA270_USE_MMC == 1 ++/* REG GPDR1 ++ * GP32 == MMCCLK is output */ ++#define GPDR1_MMC 0x00000001 /* GPIO32 is OUTPUT */ ++/** REG GAFR1_L ++ * GP32 == MMCLK is AF10 ++ ** REG GAFR2_U ++ * GP92 == MMDAT0 is AF01 ++ ** REG GAFR3_L ++ * GP109== MMDAT1 is AF01 ++ * GP110== MMCS0 is AF01 ++ * GP111== MMCS1 is AF01 ++ ** REG GAFR3_U ++ * GP112== MMCMD is AF01 */ ++#define GAFR1_L_MMC 0x00000002 /* GPIO 32 is AF10 */ ++#define GAFR2_U_MMC 0x01000000 /* GPIO 92 AF 01 */ ++#define GAFR3_L_MMC 0x54000000 /* GPIO 109 - 111 AF 01 */ ++#define GAFR3_U_MMC 0x00000001 /* GPIO 112 AF 01 */ ++#else ++#define GPDR1_MMC 0x00000000 ++#define GAFR2_U_MMC 0x00000000 ++#define GAFR3_L_MMC 0x00000000 ++#define GAFR3_U_MMC 0x00000000 ++#endif ++ ++#if ((PHYCORE_PXA270_USE_IDE == 1) || (PHYCORE_PXA270_USE_CF == 1)) ++/** REG GPSR1 ++ * GP48 == nPOE is 1 ++ * GP49 == nPWE is 1 ++ * GP50 == nPIOR is 1 ++ * GP51 == nPIOW is 1 ++ * GP54 == nPCE2 is 1 ++ * GP55 == nPREG is 1 ++ ** REG GPSR2 ++ * GP85 == nPCE1 is 1 */ ++#define GPSR1_IDECF 0x00CF0000 /* GPIO 48-51, 54-55 is 1 */ ++#define GPSR2_IDECF 0x00200000 /* GPIO 85 is 1 */ ++/* REG GPDR1 ++ * GP48 == nPOE is output ++ * GP49 == nPWE is output ++ * GP50 == nPIOR is output ++ * GP51 == nPIOW is output ++ * GP54 == nPCE2 is output ++ * GP55 == nPREG is output ++ * REG GPDR2 ++ * GP79 == PSKTSEL is output ++ * GP85 == nPCE1 is output */ ++#define GPDR1_IDECF 0x00CF0000 /* GPIO 48-51, 54-57 is output */ ++#define GPDR2_IDECF 0x00208000 /* GPIO 79,85 is output */ ++/** REG GAFR1_U ++ * GP48 == nPOE is AF10 ++ * GP49 == nPWE is AF10 ++ * GP50 == nPIOR is AF10 ++ * GP51 == nPIOW is AF10 ++ * GP54 == nPCE2 is AF10 ++ * GP55 == nPREG is AF10 ++ * GP56 == nPWAIT is AF01 ++ * GP57 == nPIOIS16 is AF01 ++ * REG GAFR2_L ++ * GP79 == PSKTSEL is AF01 ++ * REG GAFR2_U ++ * GP85 == nPCE1 is AF01 */ ++#define GAFR1_U_IDECF 0x0005A0AA /* GPIO 48-55 AF 10, 56-57 AF01 */ ++#define GAFR2_L_IDECF 0x40000000 /* GPIO 79 AF 01 */ ++#define GAFR2_U_IDECF 0x00000400 /* GPIO 85 AF 01 */ ++#else ++#define GPSR1_IDECF 0x00000000 ++#define GPSR2_IDECF 0x00000000 ++#define GPDR1_IDECF 0x00000000 ++#define GPDR2_IDECF 0x00000000 ++#define GAFR1_U_IDECF 0x00000000 ++#define GAFR2_L_IDECF 0x00000000 ++#define GAFR2_U_IDECF 0x00000000 ++#endif ++ ++#if PHYCORE_PXA270_USE_FFUART == 1 ++/* REG GPSR1 ++ * GP41 == FFRTS is 1 */ ++#define GPSR1_FFUART 0x00000200 /* GPIO 41 is 1 */ ++/* REG GPDR1 ++ * GP39 == FFTXD is output ++ * GP40 == FFDTR is output ++ * GP41 == FFRTS is output */ ++#define GPDR1_FFUART 0x00000380 /* GPIO 39-41 is OUTPUT */ ++/* REG GAFR1_L ++ * GP34 == FFRXD is AF01 ++ * GP35 == FFCTS is AF01 ++ * GP36 == FFDCD is AF01 ++ * GP37 == FFDSR is AF01 ++ * GP38 == FFRI is AF01 ++ * GP39 == FFTXD is AF10 ++ * GP40 == FFDTR is AF10 ++ * GP41 == FFRTS is AF10 */ ++#define GAFR1_L_FFUART 0x000A9550 /* GPIO 34-38 is AF01, 39-41 is AF10 */ ++#else ++#define GPSR1_FFUART 0x00000000 ++#define GPDR1_FFUART 0x00000000 ++#define GAFR1_L_FFUART 0x00000000 ++#endif ++ ++#if PHYCORE_PXA270_USE_BTUART == 1 ++/* REG GPSR1 ++ * GP45 == BTRTS is 1*/ ++#define GPSR1_BTUART 0x00002000 /* GPIO 45 is 1 */ ++/* REG GPDR1 ++ * GP43 == BTRXD is output ++ * GP45 == BTRTS is output */ ++#define GPDR1_BTUART 0x00002800 /* GPIO 43,45 is OUTPUT */ ++/* REG GAFR1_L ++ * GP42 == BTRXD is AF01 ++ * GP43 == BTTXD is AF10 ++ * GP44 == BTCTS is AF01 ++ * GP45 == BTRTS is AF10 */ ++#define GAFR1_L_BTUART 0x09900000 /* GPIO 42,44 is AF01, 43,45 is AF10 */ ++#else ++#define GPSR1_BTUART 0x00000000 ++#define GPDR1_BTUART 0x00000000 ++#define GAFR1_L_BTUART 0x00000000 ++#endif ++ ++#if PHYCORE_PXA270_USE_IRUART == 1 ++/* REG GPDR1 ++ * GP47 == STDTXD is output */ ++#define GPDR1_IRUART 0x00008000 /* GPIO 47 is OUTPUT */ ++/* REG GAFR1_L ++ * GP46 == STDRXD is AF10 ++ * GP47 == STDTXD is AF01 */ ++#define GAFR1_L_IRUART 0x60000000 /* GPIO 46 is AF10, 47 is AF01 */ ++#else ++#define GPDR1_IRUART 0x00000000 ++#define GAFR1_L_IRUART 0x00000000 ++#endif ++ ++#if PHYCORE_PXA270_USE_AC97 == 1 ++/* REG GPDR0 ++ * GP30 == AC97DatO is output ++ * GP31 == AC97Sync is output ++ ** REG GPDR3 ++ * GP113== nAC97_RESET is output */ ++#define GPDR0_AC97 0xC0000000 /* GPIO 30,31 is OUTPUT */ ++#define GPDR3_AC97 0x00020000 /* GPIO 113 is OUTPUT */ ++/* REG GAFR0_L ++ * GP28 == AC97CLK is AF01 ++ * GP29 == AC97DatIn is AF01 ++ * GP30 == AC97DatO is AF10 ++ * GP31 == AC97SYNC is AF10 ++ * GP113== AC97_RES is AF10 */ ++#define GAFR0_U_AC97 0xA5000000 /* GPIO 28,29 is AF01, 30,31 is AF10 */ ++#define GAFR3_U_AC97 0x00000008 /* GPIO 113 is AF10 */ ++#else ++#define GPDR0_AC97 0x00000000 ++#define GPDR3_AC97 0x00000000 ++#define GAFR0_U_AC97 0x00000000 ++#define GAFR3_U_AC97 0x00000000 ++#endif ++ ++#if PHYCORE_PXA270_USE_SSP == 1 ++/** REG GPSR0 ++ * GP24 == SSPSFRM is 1 */ ++#define GPSR0_SSP 0x01000000 /* GPIO24 is 1 */ ++/* REG GPDR0 ++ * GP23 == SSPCLK is output ++ * GP24 == SSPSFRM is output ++ * GP25 == SSPTXD is output ++ ** REG GPDR1 ++ * GP53== SSPSYSCLK is output */ ++#define GPDR0_SSP 0x03800000 /* GPIO 23-25 is OUTPUT */ ++#define GPDR1_SSP 0x00200000 /* GPIO 53 is OUTPUT */ ++/** REG GAFR0_L ++ * GP23 == SSPSCLK is AF10 ++ * GP24 == SSPSFRM is AF10 ++ * GP25 == SSPTXD is AF10 ++ * GP26 == SSPRXD is AF01 ++ * GP27 == SSPEXTCLK is AF01 ++ ** REG GAFR1_U ++ * GP53 == SSPSYSCLK is AF11 */ ++#define GAFR0_U_SSP 0x005A8000 /* GPIO 23-25 is AF10, 26,27 is AF01 */ ++#define GAFR1_U_SSP 0x00000C00 /* GPIO 113 is AF10 */ ++#else ++#define GPSR0_SSP 0x00000000 ++#define GPDR0_SSP 0x00000000 ++#define GPDR1_SSP 0x00000000 ++#define GAFR0_U_SSP 0x00000000 ++#define GAFR1_U_SSP 0x00000000 ++#endif ++ ++#if PHYCORE_PXA270_USE_SSP3 == 1 ++/** REG GPSR2 ++ * GP83 == SSPSFRM3 is 1 */ ++#define GPSR2_SSP3 0x00080000 /* GPIO83 is 1 */ ++/* REG GPDR2 ++ * GP81 == SSPXD3 is output ++ * GP83 == SSPFRM3 is output ++ * GP84 == SSPCLK3 is output */ ++#define GPDR2_SSP3 0x001A0000 /* GPIO 81,83,84 is OUTPUT */ ++/** REG GAFR0_L ++ * GP81 == SSPTXD3 is AF01 ++ * GP82 == SSPRXD3 is AF01 ++ * GP83 == SSPSFRM is AF01 ++ * GP84 == SSPCLK3 is AF01 */ ++#define GAFR2_U_SSP3 0x00000154 /* GPIO 81-84 is AF01 */ ++#else ++#define GPSR2_SSP3 0x00000000 ++#define GPDR2_SSP3 0x00000000 ++#define GAFR2_U_SSP3 0x00000000 ++#endif ++ ++/* ++ * GPIO set "1" ++ * ++ *** REG GPSR0 ++ * GP15 == nCS1 is 1 ++ * GP20 == nSDCS2 is 1 ++ * GP21 == nSDCS3 is 1 ++ *** REG GPSR1 ++ * GP33 == nCS5 is 1 ++ *** REG GPSR2 ++ * GP78 == nCS2 is 1 ++ * GP80 == nCS4 is 1 ++ */ ++#define GPSR0_DFT 0x00308000 ++#define GPSR1_DFT 0x00000002 ++#define GPSR2_DFT 0x00014000 ++#define GPSR3_DFT 0x00000000 ++ ++#define CFG_GPSR0_VAL GPSR0_DFT | GPSR0_LCD | GPSR0_SSP ++#define CFG_GPSR1_VAL GPSR1_DFT | GPSR1_IDECF | GPSR1_FFUART | GPSR1_BTUART ++#define CFG_GPSR2_VAL GPSR2_DFT | GPSR2_IDECF | GPSR2_SSP3 ++#define CFG_GPSR3_VAL GPSR3_DFT ++ ++/* ++#define CFG_GPSR0_VAL 0x01308000 ++#define CFG_GPSR1_VAL 0x03CFAA82 ++#define CFG_GPSR2_VAL 0x00214000 ++#define CFG_GPSR3_VAL 0x00000000 ++*/ ++ ++/* ++ * GPIO clear "0" ++ */ ++#define CFG_GPCR0_VAL 0x00000000 ++#define CFG_GPCR1_VAL 0x00000000 ++#define CFG_GPCR2_VAL 0x00000000 ++#define CFG_GPCR3_VAL 0x00000000 ++ ++/* ++ * set Direction "1" GPIO == output else input ++ * ++ ** REG GPDR0 ++ * GP03 == PWR_SDA is output ++ * GP04 == PWR_SCL is output ++ * GP15 == nCS1 is output ++ * GP20 == nSDCS2 is output ++ * GP21 == nSDCS3 is output ++ ** REG GPDR1 ++ * GP33 == nCS5 is output ++ ** REG GPDR2 ++ * GP78 == nCS2 is output ++ * GP80 == nCS4 is output ++ * GP90 == LED0 is output ++ * GP91 == LED1 is output ++ ** REG GPDR3 ++ * GP117== SCL is output ++ * GP118== SDA is output ++ */ ++ ++#define GPDR0_DFT 0x00308018 ++#define GPDR1_DFT 0x00000002 ++#define GPDR2_DFT 0x0C014000 ++#define GPDR3_DFT 0x00600000 ++ ++#define CFG_GPDR0_VAL GPDR0_DFT | GPDR0_LCD | GPDR0_AC97 | GPDR0_SSP ++#define CFG_GPDR1_VAL GPDR1_DFT | GPDR1_LCD | GPDR1_MMC | GPDR1_IDECF | GPDR1_FFUART | GPDR1_BTUART | GPDR1_IRUART | GPDR1_SSP ++#define CFG_GPDR2_VAL GPDR2_DFT | GPDR2_LCD | GPDR2_SSP3 | GPDR2_IDECF ++#define CFG_GPDR3_VAL GPDR3_DFT | GPDR3_AC97 ++ ++/* ++ * set Alternate Funktions ++ * ++ ** REG GAFR0_L ++ * GP15 == nCS1 is AF10 ++ ** REG GAFR0_U ++ * GP18 == RDY is AF01 ++ * GP20 == nSDCS2 is AF01 ++ * GP21 == nSDCS3 is AF01 ++ ** REG GAFR1_L ++ * GP33 == nCS5 is AF10 ++ ** REG GAFR2_L ++ * GP78 == nCS2 is AF10 ++ ** REG GAFR2_U ++ * GP80 == nCS4 is AF10 ++ ** REG GAFR3_U ++ * GP117== SCL is AF01 ++ * GP118== SDA is AF01 ++ */ ++ ++#define GAFR0_L_DFT 0x80000000 ++#define GAFR0_U_DFT 0x00000510 ++#define GAFR1_L_DFT 0x00000008 ++#define GAFR1_U_DFT 0x00000000 ++#define GAFR2_L_DFT 0x20000000 ++#define GAFR2_U_DFT 0x00000002 ++#define GAFR3_L_DFT 0x00000000 ++#define GAFR3_U_DFT 0x00001400 ++ ++#define CFG_GAFR0_L_VAL GAFR0_L_DFT ++#define CFG_GAFR0_U_VAL GAFR0_U_DFT | GAFR0_U_AC97 | GAFR0_U_SSP ++#define CFG_GAFR1_L_VAL GAFR1_L_DFT | GAFR1_L_FFUART | GAFR1_L_BTUART | GAFR1_L_IRUART | GAFR1_L_MMC ++#define CFG_GAFR1_U_VAL GAFR1_U_DFT | GAFR1_U_LCD | GAFR1_U_IDECF | GAFR1_U_SSP ++#define CFG_GAFR2_L_VAL GAFR2_L_DFT | GAFR2_L_LCD | GAFR2_L_IDECF ++#define CFG_GAFR2_U_VAL GAFR2_U_DFT | GAFR2_U_IDECF | GAFR2_U_SSP3 | GAFR2_U_MMC ++#define CFG_GAFR3_L_VAL GAFR3_L_DFT | GAFR3_L_MMC ++#define CFG_GAFR3_U_VAL GAFR3_U_DFT | GAFR3_U_MMC | GAFR3_U_AC97 ++ ++/* ++#define CFG_GAFR0_L_VAL 0x90000000 ++#define CFG_GAFR0_U_VAL 0xA55A859A ++#define CFG_GAFR1_L_VAL 0x699A955A ++#define CFG_GAFR1_U_VAL 0xAAA5ACAA ++#define CFG_GAFR2_L_VAL 0x6AAAAAAA ++#define CFG_GAFR2_U_VAL 0x01000556 ++#define CFG_GAFR3_L_VAL 0x54000000 ++#define CFG_GAFR3_U_VAL 0x00001549 ++*/ ++ ++/* ++ * Power Manager Sleep Status Register (PSSR) ++ * ++ * FIXME: RSC: are these registers set correctly??? ++ * ++ * [6] = 0 OTG pad is not holding it's state ++ * [5] = 1 Read Disable Hold: receivers of all gpio pins are disabled ++ * [4] = 1 gpio pins are held in their sleep mode state ++ * [3] = 0 The processor has not been placed in standby mode by ++ * configuring the PWRMODE register since STS was cleared ++ * by a reset or by software. ++ * [2] = 1 nVDD_FAULT has been asserted and caused the processor to ++ * enter deep-sleep mode. ++ * [1] = 1 nBATT_FAULT has been asserted and caused the processor to ++ * enter deep-sleep mode. ++ * [0] = 1 The processor was placed in sleep mode by configuring the ++ * PWRMODE register. ++ */ ++ ++/* #define CFG_PSSR_VAL 0x20 */ ++#define CFG_PSSR_VAL 0x37 ++ ++ ++/********************************************************************* ++ * CONFIG PXA270 Chipselect settings * ++ *********************************************************************/ ++ ++/* ++ * Memory settings ++ * ++ * FIXME: RSC: fix documentation ++ * ++ * This is the configuration for nCS1/0 -> PLD / flash ++ * configuration for nCS1: ++ * [31] 0 - Slower Device ++ * [30:28] 001 - CS deselect to CS time: 1*(2*MemClk) = 20 ns ++ * [27:24] 0010 - Address to data valid in bursts: (2+1)*MemClk = 30 ns ++ * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns ++ * [19] 1 - 16 Bit bus width ++ * [18:16] 011 - burst RAM or FLASH ++ * configuration for nCS0 (J3 Flash): ++ * [15] 0 - Slower Device ++ * [14:12] 001 - CS deselect to CS time: 1*(2*MemClk) = 20 ns ++ * [11:08] 0010 - Address to data valid in bursts: (2+1)*MemClk = 30 ns ++ * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns ++ * [03] 0 - 32 Bit bus width ++ * [02:00] 011 - burst RAM or FLASH ++ */ ++#if PHYCORE_PXA270_USE_K3FLASH == 0 ++#define CFG_MSC0_VAL 0x128C1262 ++#else ++/* configuration for nCS0 (K3 Flash): ++ * [15] 0 - Slower Device ++ * [14:12] 001 - CS deselect to CS time: 1*(2*MemClk) = 20 ns ++ * [11:08] 0010 - Address to data valid in bursts: (2+1)*MemClk = 30 ns ++ * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns ++ * [03] 0 - 32 Bit bus width ++ * [02:00] 011 - burst RAM or FLASH ++ */ ++#define CFG_MSC0_VAL 0x128C12B3 ++#endif ++ ++/* ++ * This is the configuration for nCS3/2 -> FIXME / FIXME ++ * configuration for nCS3: POWER ++ * ++ * [31] 0 - Slower Device ++ * [30:28] 111 - RRR3: CS deselect to CS time: 7*(2*MemClk) = 140 ns ++ * [27:24] 1111 - RDN3: Address to data valid in bursts: (15+1)*MemClk = 160 ns ++ * [23:20] 1111 - RDF3: Address for first access: (23+1)*MemClk = 240 ns ++ * [19] 0 - 32 Bit bus width ++ * [18:16] 100 - variable latency I/O ++ * configuration for nCS2: PLD ++ * [15] 0 - Slower Device ++ * [14:12] 111 - RRR2: CS deselect to CS time: 7*(2*MemClk) = 140 ns ++ * [11:08] 1111 - RDN2: Address to data valid in bursts: (15+1)*MemClk = 160 ns ++ * [07:04] 1111 - RDF2: Address for first access: (23+1)*MemClk = 240 ns ++ * [03] 1 - 16 Bit bus width ++ * [02:00] 100 - variable latency I/O ++ */ ++#define CFG_MSC1_VAL 0x128c128c ++ ++/* ++ * This is the configuration for nCS5/4 -> FIXME / FIXME ++ * ++ * configuration for nCS5: LAN Controller ++ * [31] 0 - Slower Device ++ * [30:28] 001 - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns ++ * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns ++ * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns ++ * [19] 0 - 32 Bit bus width ++ * [18:16] 100 - variable latency I/O ++ * configuration for nCS4: USB ++ * [15] 0 - Slower Device ++ * [14:12] 111 - RRR4: CS deselect to CS time: 7*(2*MemClk) = 140 ns ++ * [11:08] 1111 - RDN4: Address to data valid in bursts: (15+1)*MemClk = 160 ns ++ * [07:04] 1111 - RDF4: Address for first access: (23+1)*MemClk = 240 ns ++ * [03] 1 - 16 Bit bus width ++ * [02:00] 100 - variable latency I/O ++ */ ++#define CFG_MSC2_VAL 0x1234128C ++ ++/********************************************************************* ++ * Configuration for FLASH memory * ++ *********************************************************************/ ++ ++#define CFG_FLASH_1 0x00000000 /* Flash Bank #1 */ ++#define CFG_FLASH_SIZE 0x02000000 /* 32 MB */ ++#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ ++#define CFG_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */ ++#define CFG_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */ ++#define CFG_FLASH_INTERLEAVE 2 /* ... made of 2 chips */ ++#define CFG_FLASH_BANK_SIZE 0x2000000 /* size of one flash bank */ ++#define CFG_FLASH_SECT_SIZE 0x0040000 /* size of erase sector */ ++#define CFG_FLASH_BASE 0x0000000 /* location of flash memory */ ++#if PHYCORE_PXA270_USE_K3FLASH == 1 ++#define CFG_FLASH_UNLOCK 1 /* perform hw unlock first */ ++#endif ++#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* timeout for Erase operation */ ++#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* timeout for Write operation */ ++ ++/********************************************************************* ++ * CONFIG PXA270 SDRAM settings * ++ *********************************************************************/ ++ ++/* ++ * SDRAM Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ ++#define CFG_DRAM_BASE 0xa0000000 ++#define CFG_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ ++#define CFG_SDRAM_1_SIZE 0x04000000 /* 64 MB */ ++ ++#define CFG_DRAM_BASE 0xa0000000 ++#define CFG_DRAM_SIZE 0x04000000 ++ ++/* MDCNFG: SDRAM Configuration Register FIXME: RSC: check!! ++ * ++ * [31] 0 - Stack1 ++ * [30] 0 - dcacx2 ++ * [20] 0 - reserved ++ * [31:29] 000 - reserved ++ * [28] 1 - SA1111 compatiblity mode ++ * [27] 1 - latch return data with return clock ++ * [26] 0 - alternate addressing for pair 2/3 ++ * [25:24] 10 - timings ++ * [23] 1 - internal banks in lower partition 2/3 (not used) ++ * [22:21] 10 - row address bits for partition 2/3 (not used) ++ * [20:19] 01 - column address bits for partition 2/3 (not used) ++ * [18] 0 - SDRAM partition 2/3 width is 32 bit ++ * [17] 0 - SDRAM partition 3 disabled ++ * [16] 0 - SDRAM partition 2 disabled ++ * [15] 0 - Stack1 ++ * [14] 0 - dcacx0 ++ * [13] 0 - Stack0 ++ * [12] 0 - SA1110 compatiblity mode ++ * [11] 1 - always 1 ++ * [10] 0 - no alternate addressing for pair 0/1 ++ * [09:08] 10 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk ++ * [7] 1 - 4 internal banks in lower partition pair ++ * [06:05] 10 - 13 row address bits for partition 0/1 ++ * [04:03] 01 - 9 column address bits for partition 0/1 ++ * [02] 0 - SDRAM partition 0/1 width is 32 bit ++ * [01] 0 - disable SDRAM partition 1 ++ * [00] 1 - enable SDRAM partition 0 ++ */ ++ ++/* K4S561633*/ ++#define CFG_MDCNFG_VAL 0x0AC90AC9 ++ ++/* MDREFR: SDRAM Refresh Control Register ++ * ++ * [31] 0 - ALTREFA ++ * [30] 0 - ALTREFB ++ * [29] 1 - K0DB4 ++ * [28] 0 - reserved ++ * [27] 0 - reserved ++ * [26] 0 - reserved ++ * [25] 1 - K2FREE: not free running ++ * [24] 0 - K1FREE: not free running ++ * [23] 1 - K0FREE: not free running ++ * [22] 0 - SLFRSH: self refresh disabled ++ * [21] 0 - reserved ++ * [20] 0 - APD: no auto power down ++ * [19] 0 - K2DB2: SDCLK2 is MemClk ++ * [18] 0 - K2RUN: disable SDCLK2 ++ * [17] 0 - K1DB2: SDCLK1 is MemClk ++ * [16] 1 - K1RUN: enable SDCLK1 ++ * [15] 1 - E1PIN: SDRAM clock enable ++ * [14] 1 - K0DB2: SDCLK0 is MemClk ++ * [13] 0 - K0RUN: disable SDCLK0 ++ * [12] 0 - RESERVED ++ * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 ++ */ ++#define CFG_MDREFR_VAL 0x2281C018 ++ ++/* MDMRS: Mode Register Set Configuration Register ++ * ++ * [31] 0 - reserved ++ * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used) ++ * [22:20] 000 - MDCL2: SDRAM2/3 Cas Latency. (not used) ++ * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used) ++ * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used) ++ * [15] 0 - reserved ++ * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value. ++ * [06:04] 010 - MDCL0: SDRAM0/1 Cas Latency. ++ * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. ++ * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. ++ */ ++#define CFG_MDMRS_VAL 0x00020022 ++ ++/********************************************************************* ++ * CONFIG PXA270 Clock generation * ++ *********************************************************************/ ++#define CFG_FLYCNFG_VAL 0x00010001 ++#define CFG_SXCNFG_VAL 0x40044004 ++#define CFG_CKEN 0x005002D0 /* Memory, Int.Memory, OS Timer, BTUART, FFUART, STUART */ ++ ++#if PHYCORE_PXA270_SPEED == 520 ++#define CFG_CCCR 0x00000290 /* Memory Clock is f. Table; N=2.5, L=16 => 16x13=208, 208x2,5=520 MHz */ ++#elif PHYCORE_PXA270_SPEED == 260 ++#define CFG_CCCR 0x02000288 /* Memory Clock is System-Bus Freq., N=2.5, L=8 => 8x13=104, 104x2,5=260 MHz */ ++#else ++#error You have specified an illegal speed. ++#endif ++ ++/********************************************************************* ++ * CONFIG PXA270 CF interface * ++ *********************************************************************/ ++#define CFG_MECR_VAL 0x00000003 ++#define CFG_MCMEM0_VAL 0x00010504 ++#define CFG_MCMEM1_VAL 0x00010504 ++#define CFG_MCATT0_VAL 0x00010504 ++#define CFG_MCATT1_VAL 0x00010504 ++#define CFG_MCIO0_VAL 0x00004715 ++#define CFG_MCIO1_VAL 0x00004715 ++ ++/********************************************************************* ++ * CONFIG PXA270 IDE interface * ++ *********************************************************************/ ++#if ((PHYCORE_PXA270_USE_IDE == 1) || (PHYCORE_PXA270_USE_CF == 1)) ++#define CONFIG_DOS_PARTITION 1 ++#define CONFIG_ATAPI 1 ++#define CONFIG_SUPORT_VFAT 1 ++#define CONFIG_PXA_PCMCIA 1 ++#define CONFIG_PXA_IDE 1 ++#undef CONFIG_IDE_LED /* no led supported */ ++#define CONFIG_PCMCIA_SLOT_A 1 /* just to keep build system happy */ ++#define CFG_PCMCIA_MEM_ADDR 0x38000000 ++#define CFG_PCMCIA_MEM_SIZE 0x04000000 ++ ++#if ((PHYCORE_PXA270_USE_IDE == 1) && (PHYCORE_PXA270_USE_CF == 1)) ++#define CFG_IDE_MAXBUS 2 /* max. 2 IDE bus */ ++#define CFG_IDE_MAXDEVICE 4 /* max. 2 drive per IDE bus */ ++#define CFG_ATA_BASE_ADDR 0x20000000 ++#define CFG_ATA_IDE0_OFFSET 0x0000 ++#define CFG_ATA_IDE1_OFFSET 0x10000000 ++#endif ++#if ((PHYCORE_PXA270_USE_IDE == 1) && (PHYCORE_PXA270_USE_CF == 0)) ++#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ ++#define CFG_IDE_MAXDEVICE 2 /* max. 2 drive per IDE bus */ ++#define CFG_ATA_BASE_ADDR 0x20000000 ++#define CFG_ATA_IDE0_OFFSET 0x0000 ++#endif ++#if ((PHYCORE_PXA270_USE_IDE == 0) && (PHYCORE_PXA270_USE_CF == 1)) ++#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ ++#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ ++#define CFG_ATA_BASE_ADDR 0x30000000 ++#define CFG_ATA_IDE0_OFFSET 0x0000 ++#endif ++ ++#define CFG_ATA_DATA_OFFSET 0x0 ++#define CFG_ATA_REG_OFFSET 0x0 ++#define CFG_ATA_ALT_OFFSET 0x800 ++#endif ++/********************************************************************* ++ * CONFIG PXA270 MMC interface * ++ *********************************************************************/ ++#if PHYCORE_PXA270_USE_MMC == 1 ++#define CONFIG_MMC 1 ++#define CFG_MMC_BASE 0xF0000000 ++#define CONFIG_DOS_PARTITION 1 ++#define CONFIG_SUPORT_VFAT 1 ++#endif ++/********************************************************************* ++ * CONFIG Ethernet SMSC91C111 * ++ *********************************************************************/ ++ ++#define CONFIG_DRIVER_SMC91111 1 ++#define CONFIG_SMC91111_BASE 0x14000300 /* CHIP Select 5 */ ++#define CONFIG_SMC_USE_32_BIT ++#undef CONFIG_SMC_91111_EXT_PHY ++#define CONFIG_NET_RETRY_COUNT 10 ++ ++#define CONFIG_ETHADDR 00:50:C2:14:43:85 ++#define CONFIG_NETMASK 255.255.0.0 ++#define CONFIG_IPADDR 192.168.0.2 ++#define CONFIG_SERVERIP 192.168.0.1 ++ ++/********************************************************************* ++ * CONFIG PXA270 LCD * ++ *********************************************************************/ ++#if PHYCORE_PXA270_USE_LCD == 1 ++#define CONFIG_LCD ++#define CONFIG_SHARP_LQ084V1DG21 ++#endif ++/********************************************************************* ++ * CONFIG PXA270 I2C * ++ *********************************************************************/ ++#define CONFIG_HARD_I2C 1 ++#define CFG_I2C_SPEED 50000 ++#define CFG_I2C_SLAVE 0xfe ++ ++#define CFG_ENV_IS_IN_EEPROM 1 ++ ++#define CFG_ENV_OFFSET 0x00 /* environment starts here */ ++#define CFG_ENV_SIZE 2048 /* 1 KiB */ ++#define CFG_I2C_EEPROM_ADDR 0x54 /* A0=0, A1=0 (hardwired) */ ++ /* without R/W-Bit ! */ ++#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ ++#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 15 /* between stop and start */ ++#define CFG_I2C_EEPROM_ADDR_LEN 2 /* length of byte address */ ++#define CFG_EEPROM_SIZE 4096 /* size in bytes */ ++#undef CFG_I2C_INIT_BOARD /* board hasn't it's own init */ ++#define BOARD_LATE_INIT 1 ++ ++ ++/* ++ ##################################################################### ++ # # ++ # U-BOOT settings # ++ # # ++ ##################################################################### ++ */ ++ ++/* ++ * If we are developing, we might want to start armboot from ram ++ * so we MUST NOT initialize critical regs like mem-timing ... ++ */ ++#undef CONFIG_SKIP_LOWLEVEL_INIT ++ ++/* ++ * Select u-boot PXA270 configuration ++ */ ++#define CONFIG_PXA27X 1 /* this is an PXA270 CPU */ ++#define CONFIG_PHYCORE_PXA270 1 /* config for Phytec PCM-027 board */ ++#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */ ++ ++/* ++ * Select serial console configuration ++ */ ++#define CONFIG_FFUART 1 /* FFUART is default */ ++#define CONFIG_BAUDRATE 115200 ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++/* ++ * Select support for RTC PCF8564 (fully comp. to PCF8563 from Philips) ++ */ ++#define CONFIG_RTC_PCF8563 1 ++#define CFG_I2C_RTC_ADDR 0x51 ++/* ++ * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if ++ * neccessary in include/cmd_confdefs.h file. (Un)comment for getting ++ * functionality or size of u-boot code. ++ */ ++#if ((PHYCORE_PXA270_USE_IDE == 1) || (PHYCORE_PXA270_USE_CF == 1) || (PHYCORE_PXA270_USE_MMC == 1)) ++#define CONFIG_STORAGE_COMMANDS CFG_CMD_FAT | CFG_CMD_EXT2 ++#endif ++ ++#if ((PHYCORE_PXA270_USE_IDE == 1) || (PHYCORE_PXA270_USE_CF == 1)) ++#define CONFIG_IDECF_COMMANDS CFG_CMD_IDE | CFG_CMD_PCMCIA ++#endif ++ ++#if (PHYCORE_PXA270_USE_MMC == 1) ++#define CONFIG_MMC_COMMANDS CFG_CMD_MMC ++#endif ++ ++#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | CFG_CMD_JFFS2 | CFG_CMD_DHCP | \ ++ CFG_CMD_I2C | CFG_CMD_EEPROM | CFG_CMD_PING | \ ++ CFG_CMD_DATE | \ ++ CONFIG_STORAGE_COMMANDS | \ ++ CONFIG_IDECF_COMMANDS | \ ++ CONFIG_MMC_COMMANDS ) ++ ++#include ++ ++/* ++ * low level support for gdb debugger ++ * ++ */ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ ++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ ++#endif ++ ++/* ++ * Boot options. Setting delay to -1 stops autostart count down. ++ */ ++#define CONFIG_BOOTDELAY 3 ++#define CONFIG_BOOTARGS "" ++#define CONFIG_BOOTCOMMAND "" ++#undef CONFIG_SHOW_BOOT_PROGRESS ++#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow stopping of boot process even with bootdelay=0 */ ++ ++/* ++ * General options for u-boot. Modify to save memory foot print ++ */ ++#define CFG_LONGHELP /* undef saves memory */ ++#define CFG_PROMPT "uboot> " /* prompt string */ ++#define CFG_CBSIZE 1024 /* console I/O buffer */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size */ ++#define CFG_MAXARGS 16 /* max command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* boot args buf size */ ++#define CFG_MEMTEST_START 0xa0400000 /* memtest test area */ ++#define CFG_MEMTEST_END 0xa0800000 ++#undef CFG_CLKS_IN_HZ /* use HZ for freq. display */ ++#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ ++ ++/* phytec */ ++// #define CFG_CPUSPEED 0x141 /* core clock - register value */ ++#define CFG_CPUSPEED 0x0a000290 /* for 520 MHz */ ++ ++/* ++ * Definitions related to passing arguments to kernel. ++ */ ++#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ ++#define CONFIG_INITRD_TAG 1 /* send initrd params */ ++#undef CONFIG_VFD /* do not send framebuffer setup */ ++ ++ ++/* ++ * Malloc pool need to host env + 128 Kb reserve for other allocations. ++ */ ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + (128<<10)) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++#define CONFIG_STACKSIZE (120<<10) /* stack size */ ++ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ ++#endif ++ ++/* ++ * This is setting for JFFS2 support in u-boot. ++ * Right now there is no gain for user, but later on booting kernel might be ++ * possible. Consider using XIP kernel running from flash to save RAM ++ * footprint. ++ * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. ++ */ ++#define CFG_JFFS2_FIRST_BANK 0 ++#define CFG_JFFS2_FIRST_SECTOR 5 ++#define CFG_JFFS2_NUM_BANKS 1 ++#define CONFIG_JFFS2_CMDLINE ++#define MTDIDS_DEFAULT "nor0=phys_mapped_flash" ++#define MTDPARTS_DEFAULT "mtdparts=phys_mapped_flash:256k(u-boot)ro,1536k(kernel),-(root)" ++ ++/* ++ * Environment setup. Definitions of monitor location and size with ++ * definition of environment setup ends up in 2 possibilities. ++ * 1. Embeded environment - in u-boot code is space for environment ++ * 2. Environment is read from predefined sector of flash ++ * Right now we support 2. possiblity, but expecting no env placed ++ * on mentioned address right now. This also needs to provide whole ++ * sector for it - for us 256Kb is really waste of memory. U-boot uses ++ * default env. and until kernel parameters could be sent to kernel ++ * env. has no sense to us. ++ */ ++#define CFG_MONITOR_BASE CFG_FLASH_BASE ++#define CFG_MONITOR_LEN 0x20000 /* 128kb ( 1 flash sector ) */ ++#undef CFG_ENV_IS_IN_FLASH /* we store ENV in EEPROM */ ++#define CONFIG_ENV_OVERWRITE /* env is not writable now */ ++ ++/* ++ * Well this has to be defined, but on the other hand it is used differently ++ * one may expect. For instance loadb command do not cares :-) ++ * So advice is - do not relay on this... ++ */ ++#define CFG_LOAD_ADDR 0xa3000000 ++ ++#endif /* __CONFIG_H */ +Index: board/phycore_pxa270/flash.c +=================================================================== +--- /dev/null ++++ b/board/phycore_pxa270/flash.c +@@ -0,0 +1,318 @@ ++/* ++ * Copyright (C) 2003 ETC s.r.o. ++ * ++ * This code was inspired by Marius Groeger and Kyle Harris code ++ * available in other board ports for U-Boot ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ * Written by Peter Figuli , 2003. ++ * ++ */ ++ ++#include ++#include "intel.h" ++ ++ ++/* ++ * This code should handle CFI FLASH memory device. This code is very ++ * minimalistic approach without many essential error handling code as well. ++ * Because U-Boot actually is missing smart handling of FLASH device, ++ * we just set flash_id to anything else to FLASH_UNKNOW, so common code ++ * can call us without any restrictions. ++ * TODO: Add CFI Query, to be able to determine FLASH device. ++ * TODO: Add error handling code ++ * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but ++ * hopefully may work with other configurations. ++ */ ++ ++#if ( CFG_FLASH_BUS_WIDTH == 1 ) ++# define FLASH_BUS vu_char ++# if ( CFG_FLASH_INTERLEAVE == 1 ) ++# define FLASH_CMD( x ) x ++# else ++# error "With 8bit bus only one chip is allowed" ++# endif ++ ++ ++#elif ( CFG_FLASH_BUS_WIDTH == 2 ) ++# define FLASH_BUS vu_short ++# if ( CFG_FLASH_INTERLEAVE == 1 ) ++# define FLASH_CMD( x ) x ++# elif ( CFG_FLASH_INTERLEAVE == 2 ) ++# define FLASH_CMD( x ) (( x << 8 )| x ) ++# else ++# error "With 16bit bus only 1 or 2 chip(s) are allowed" ++# endif ++ ++ ++#elif ( CFG_FLASH_BUS_WIDTH == 4 ) ++# define FLASH_BUS vu_long ++# if ( CFG_FLASH_INTERLEAVE == 1 ) ++# define FLASH_CMD( x ) x ++# elif ( CFG_FLASH_INTERLEAVE == 2 ) ++# define FLASH_CMD( x ) (( x << 16 )| x ) ++# elif ( CFG_FLASH_INTERLEAVE == 4 ) ++# define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x ) ++# else ++# error "With 32bit bus only 1,2 or 4 chip(s) are allowed" ++# endif ++ ++#else ++# error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration" ++#endif ++ ++ ++flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; ++ ++static FLASH_BUS flash_status_reg (void) ++{ ++ ++ FLASH_BUS *addr = (FLASH_BUS *) 0; ++ ++ *addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER); ++ ++ return *addr; ++} ++ ++static int flash_ready (ulong timeout) ++{ ++ int ok = 1; ++ ++ reset_timer_masked (); ++ while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) != ++ FLASH_CMD (CFI_INTEL_SR_READY)) { ++ if (get_timer_masked () > timeout && timeout != 0) { ++ ok = 0; ++ break; ++ } ++ } ++ return ok; ++} ++ ++ ++ ++ulong flash_init (void) ++{ ++ int i; ++ FLASH_BUS address = CFG_FLASH_BASE; ++ ++ flash_info[0].size = CFG_FLASH_BANK_SIZE; ++ flash_info[0].sector_count = CFG_MAX_FLASH_SECT; ++ flash_info[0].flash_id = INTEL_MANUFACT; ++ memset (flash_info[0].protect, 0, CFG_MAX_FLASH_SECT); ++ ++ for (i = 0; i < CFG_MAX_FLASH_SECT; i++) { ++ flash_info[0].start[i] = address; ++#ifdef CFG_FLASH_UNLOCK ++ /* Some devices are hw locked after start. */ ++ *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP); ++ *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK); ++ flash_ready (0); ++ *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY); ++#endif ++ address += CFG_FLASH_SECT_SIZE; ++ } ++ ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_FLASH_BASE, ++ CFG_FLASH_BASE + monitor_flash_len - 1, ++ &flash_info[0]); ++#ifdef CFG_ENV_IS_IN_FLASH ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_ENV_ADDR, ++ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); ++#endif ++ return CFG_FLASH_BANK_SIZE; ++} ++ ++void flash_print_info (flash_info_t * info) ++{ ++ int i; ++ ++ printf (" Intel vendor\n"); ++ printf (" Size: %ld MB in %d Sectors\n", ++ info->size >> 20, info->sector_count); ++ ++ printf (" Sector Start Addresses:"); ++ for (i = 0; i < info->sector_count; i++) { ++ if (!(i % 5)) { ++ printf ("\n"); ++ } ++ ++ printf (" %08lX%s", info->start[i], ++ info->protect[i] ? " (RO)" : " "); ++ } ++ printf ("\n"); ++} ++ ++ ++int flash_erase (flash_info_t * info, int s_first, int s_last) ++{ ++ int flag, non_protected = 0, sector; ++ int rc = ERR_OK; ++ ++ FLASH_BUS *address; ++ ++ for (sector = s_first; sector <= s_last; sector++) { ++ if (!info->protect[sector]) { ++ non_protected++; ++ } ++ } ++ ++ if (!non_protected) { ++ return ERR_PROTECTED; ++ } ++ ++ /* ++ * Disable interrupts which might cause a timeout ++ * here. Remember that our exception vectors are ++ * at address 0 in the flash, and we don't want a ++ * (ticker) exception to happen while the flash ++ * chip is in programming mode. ++ */ ++ flag = disable_interrupts (); ++ ++ ++ /* Start erase on unprotected sectors */ ++ for (sector = s_first; sector <= s_last && !ctrlc (); sector++) { ++ if (info->protect[sector]) { ++ printf ("Protected sector %2d skipping...\n", sector); ++ continue; ++ } else { ++ printf ("Erasing sector %2d ... ", sector); ++ } ++ ++ address = (FLASH_BUS *) (info->start[sector]); ++ ++ *address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE); ++ *address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM); ++ if (flash_ready (CFG_FLASH_ERASE_TOUT)) { ++ *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER); ++ printf ("ok.\n"); ++ } else { ++ *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND); ++ rc = ERR_TIMOUT; ++ printf ("timeout! Aborting...\n"); ++ break; ++ } ++ *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY); ++ } ++ if (ctrlc ()) ++ printf ("User Interrupt!\n"); ++ ++ /* allow flash to settle - wait 10 ms */ ++ udelay_masked (10000); ++ if (flag) { ++ enable_interrupts (); ++ } ++ ++ return rc; ++} ++ ++static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data) ++{ ++ FLASH_BUS *address = (FLASH_BUS *) dest; ++ int rc = ERR_OK; ++ int flag; ++ ++ /* Check if Flash is (sufficiently) erased */ ++ if ((*address & data) != data) { ++ return ERR_NOT_ERASED; ++ } ++ ++ /* ++ * Disable interrupts which might cause a timeout ++ * here. Remember that our exception vectors are ++ * at address 0 in the flash, and we don't want a ++ * (ticker) exception to happen while the flash ++ * chip is in programming mode. ++ */ ++ ++ flag = disable_interrupts (); ++ ++ *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER); ++ *address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1); ++ *address = data; ++ ++ if (!flash_ready (CFG_FLASH_WRITE_TOUT)) { ++ *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND); ++ rc = ERR_TIMOUT; ++ printf ("timeout! Aborting...\n"); ++ } ++ ++ *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY); ++ if (flag) { ++ enable_interrupts (); ++ } ++ ++ return rc; ++} ++ ++int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) ++{ ++ ulong read_addr, write_addr; ++ FLASH_BUS data; ++ int i, result = ERR_OK; ++ ++ ++ read_addr = addr & ~(sizeof (FLASH_BUS) - 1); ++ write_addr = read_addr; ++ if (read_addr != addr) { ++ data = 0; ++ for (i = 0; i < sizeof (FLASH_BUS); i++) { ++ if (read_addr < addr || cnt == 0) { ++ data |= *((uchar *) read_addr) << i * 8; ++ } else { ++ data |= (*src++) << i * 8; ++ cnt--; ++ } ++ read_addr++; ++ } ++ if ((result = write_data (info, write_addr, data)) != ERR_OK) { ++ return result; ++ } ++ write_addr += sizeof (FLASH_BUS); ++ } ++ for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) { ++ if ((result = write_data (info, write_addr, ++ *((FLASH_BUS *) src))) != ERR_OK) { ++ return result; ++ } ++ write_addr += sizeof (FLASH_BUS); ++ src += sizeof (FLASH_BUS); ++ } ++ if (cnt > 0) { ++ read_addr = write_addr; ++ data = 0; ++ for (i = 0; i < sizeof (FLASH_BUS); i++) { ++ if (cnt > 0) { ++ data |= (*src++) << i * 8; ++ cnt--; ++ } else { ++ data |= *((uchar *) read_addr) << i * 8; ++ } ++ read_addr++; ++ } ++ if ((result = write_data (info, write_addr, data)) != 0) { ++ return result; ++ } ++ } ++ return ERR_OK; ++} +Index: board/phycore_pxa270/intel.h +=================================================================== +--- /dev/null ++++ b/board/phycore_pxa270/intel.h +@@ -0,0 +1,99 @@ ++/* ++ * Copyright (C) 2002 ETC s.r.o. ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. Neither the name of the ETC s.r.o. nor the names of its contributors ++ * may be used to endorse or promote products derived from this software ++ * without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE ++ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ++ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, ++ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * Written by Marcel Telka , 2002. ++ * ++ * Documentation: ++ * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A, ++ * 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011 ++ * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18, ++ * 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005 ++ * ++ * This file is taken from OpenWinCE project hosted by SourceForge.net ++ * ++ */ ++ ++#ifndef FLASH_INTEL_H ++#define FLASH_INTEL_H ++ ++#include ++ ++/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */ ++ ++#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */ ++ ++/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */ ++ ++#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ ++#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */ ++ ++/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */ ++ ++#define CFI_CHIP_INTEL_28F320J3A 0x0016 ++#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A" ++#define CFI_CHIP_INTEL_28F640J3A 0x0017 ++#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A" ++#define CFI_CHIP_INTEL_28F128J3A 0x0018 ++#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A" ++ ++/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */ ++ ++#define CFI_CHIP_INTEL_28F640K3 0x8801 ++#define CFI_CHIPN_INTEL_28F640K3 "28F640K3" ++#define CFI_CHIP_INTEL_28F128K3 0x8802 ++#define CFI_CHIPN_INTEL_28F128K3 "28F128K3" ++#define CFI_CHIP_INTEL_28F256K3 0x8803 ++#define CFI_CHIPN_INTEL_28F256K3 "28F256K3" ++#define CFI_CHIP_INTEL_28F640K18 0x8805 ++#define CFI_CHIPN_INTEL_28F640K18 "28F640K18" ++#define CFI_CHIP_INTEL_28F128K18 0x8806 ++#define CFI_CHIPN_INTEL_28F128K18 "28F128K18" ++#define CFI_CHIP_INTEL_28F256K18 0x8807 ++#define CFI_CHIPN_INTEL_28F256K18 "28F256K18" ++ ++#endif /* FLASH_INTEL_H */ +# +# Submitted-By: Sascha Hauer, 2006-03-14 +# Committed-By: Sascha Hauer +# +# Error: +# +# gcc4 fixes. copied from kernel source +# +# State: +# +# not sent upstream yet +# +Index: common/cmd_chggpio.c +=================================================================== +--- /dev/null ++++ b/common/cmd_chggpio.c +@@ -0,0 +1,95 @@ ++/* ++ * (C) Copyright 2004 ++ * Benedikt Spranger, b.spranger@pengutronix.de ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++ ++#ifdef CFG_CMD_CHGGPIO ++ ++#include ++#include ++#include ++ ++int do_chggpio (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ int gpio, af, lv; ++ ++ if ((argc != 2) && (argc != 5)) ++ { ++ printf ("usage:\t%s <0|1>\n\t%s \n", ++ argv [0], argv [0]); ++ return -1; ++ } ++ ++ gpio = simple_strtoul (argv[1], NULL, 0); ++ ++ if (gpio < 0 || gpio > 84) ++ { ++ printf ("unknown gpio %d\n", gpio); ++ return -1; ++ } ++ ++ if (argc == 2) ++ { ++ printf ("GPIO %02d: AF %1d %s %s\n", ++ gpio, (GAFR (gpio) >> (gpio%16)*2) & 0x3, ++ (GPDR (gpio) & GPIO_bit(gpio)) ? "OUT":"IN", ++ (GPLR (gpio) & GPIO_bit(gpio)) ? "high":"low"); ++ ++ return 0; ++ } ++ ++ af = simple_strtoul (argv[2], NULL, 0); ++ ++ if ((af < 0) || (af > 3)) ++ { ++ printf ("unknown alternate function #%d\n", af); ++ return 0; ++ } ++ ++ GAFR (gpio) &= ~(0x3 << (gpio%16)*2); ++ GAFR (gpio) |= af << (gpio%16)*2; ++ ++ lv = simple_strtoul (argv[4], NULL, 0); ++ ++ if (lv) ++ GPSR(gpio) |= GPIO_bit(gpio); ++ else ++ GPCR(gpio) |= GPIO_bit(gpio); ++ ++ if (!strncmp("in", argv [3], 2) || !strncmp("IN", argv [3], 2)) ++ GPDR(gpio) &= ~GPIO_bit(gpio); ++ else if (!strncmp("out", argv [3], 3) || !strncmp("OUT", argv [3], 3)) ++ GPDR(gpio) |= GPIO_bit(gpio); ++ else ++ printf ("%s must be \"in\" or \"out\"\n", argv [3]); ++ ++ return 0; ++} ++ ++U_BOOT_CMD( ++ chggpio, 5, 2, do_chggpio, ++ "chggpio - chg GPIO <0|1>\n", ++ "hilfe\n" ++); ++ ++#endif /* CFG_CMD_GPIOPXA */ +Index: common/cmd_pxagpio.c +=================================================================== +--- /dev/null ++++ b/common/cmd_pxagpio.c +@@ -0,0 +1,79 @@ ++/* ++ * (C) Copyright 2004 ++ * Benedikt Spranger, b.spranger@pengutronix.de ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifdef CFG_CMD_GPIOPXA ++ ++#include ++#include ++#include ++#include ++ ++int do_pxagpio (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ int i,j; ++ int gpio, af, dir; ++ ++ if (argc != 3) ++ { ++ printf ("usage: %s \n", argv [0]); ++ return -1; ++ } ++ ++ gpio = simple_strtoul (argv[1], NULL, 16); ++ ++ if (gpio < 0 || gpio > 84) ++ { ++ printf ("unknown gpio %d\n", gpio); ++ return -1; ++ } ++ ++ dir = GPDR(gpio); ++ ++ GPDR(gpio) |= GPIO_bit(gpio); ++ ++ for (i = 0; i < simple_strtoul (argv[2], NULL, 16); i++) ++ { ++ GPSR(gpio) |= GPIO_bit(gpio); ++ for(j=0;j<100;j++) ++ udelay(5000); ++ if(ctrlc()) { ++ printf("abort\n"); ++ return; ++ } ++ GPCR(gpio) |= GPIO_bit(gpio); ++ for(j=0;j<100;j++) ++ udelay(5000); ++ } ++ ++ GPDR(gpio) &= ~GPIO_bit(gpio); ++ ++ return 0; ++} ++ ++U_BOOT_CMD( ++ pxagpio, 3, 2, do_pxagpio, ++ "pxagpio - toggle GPIO times\n", ++ "hilfe\n" ++); ++ ++#endif /* CFG_CMD_GPIOPXA */ diff --git a/u-boot.spec b/u-boot.spec new file mode 100644 index 0000000..ff974a2 --- /dev/null +++ b/u-boot.spec @@ -0,0 +1,127 @@ +# +# u-boot multiplatform specfile +# Copyright (c) 2007-2010 by Silvan Calarco +# +# Build examples: +# rpmbuild -ba u-boot.spec --define="TARGET_BOARD pxa255_idp" --target="arm" +# +# Tested targets: +# mainstone +# mainstone_rr +# + +Name: u-boot +Version: 2009.11.1 +Release: 1mamba +Summary: Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors +Group: System/Kernel and Hardware +Vendor: openmamba +Distribution: openmamba +Packager: Silvan Calarco +URL: http://u-boot.sourceforge.net/ +Source: ftp://ftp.denx.de/pub/u-boot/%{name}-%{version}.tar.bz2 +#Source: http://surfnet.dl.sourceforge.net/sourceforge/u-boot/%{name}-%{version}.tar.bz2 +Patch0: u-boot-1.1.4-pxa255_idp.patch +Patch1: u-boot-1.1.6-phycore-pxa270-4.diff +Patch2: u-boot-1.1.6-mainstone.patch +Patch3: u-boot-1.1.6-mainstone_rr.patch +License: GPL +BuildRoot: %{_tmppath}/%{name}-%{version}-root + +%description +Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. + +%if "%{?TARGET_BOARD}" +%package %{TARGET_BOARD} +Summary: The u-boot firmware for the %{TARGET_BOARD} %{_TARGET_CPU} platform +Group: System/Kernel and Hardware + +%description %{TARGET_BOARD} +Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. +This package contains mkimage, a tool that creates kernel bootable images for u-boot. +This package contains the firmware for the %{TARGET_BOARD} %{_TARGET_CPU} platform. +%endif + +%package tools +Summary: Tools for the u-boot Firmware +Group: System/Kernel and Hardware + +%description tools +Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. +This package contains mkimage, a tool that creates kernel bootable images for u-boot. + +%prep +%setup -q +%if "%{?TARGET_BOARD}" +%patch0 -p1 +%patch1 -p1 +%patch2 -p1 +%endif +sed -i "s|-idirafter|-I|" tools/Makefile + +%build +%if "%{?TARGET_BOARD}" +%if "%{?TARGET_BOARD}" == "mainstone_rr" + patch -p1 < %{PATCH3} + make mainstone_config +%else + make %{TARGET_BOARD}_config +%endif +CROSS_COMPILE=%{_target_platform}- make all +%else +# configure for a fictituous target (only tools will be build) +%make TQM850L_config +%make CC=%{_target_platform}-gcc tools +%endif + +%install +[ "%{buildroot}" != / ] && rm -rf %{buildroot} +install -D -m 0755 tools/mkimage %{buildroot}%{_bindir}/mkimage +#install -d -m 0755 tools/img2srec %{buildroot}%{_bindir}/img2srec +%if "%{?TARGET_BOARD}" +install -D -m 0755 u-boot.bin %{buildroot}/boot/u-boot-%{TARGET_BOARD}.bin +install -D -m 0644 u-boot.map %{buildroot}/boot/u-boot-%{TARGET_BOARD}.map +%endif + +%clean +[ "%{buildroot}" != / ] && rm -rf %{buildroot} + +%if "%{?TARGET_BOARD}" +%files %{TARGET_BOARD} +%defattr(-,root,root) +/boot/u-boot-%{TARGET_BOARD}.bin +/boot/u-boot-%{TARGET_BOARD}.map +%endif + +%files tools +%defattr(-,root,root) +%{_bindir}/mkimage +%doc COPYING CREDITS README + +%changelog +* Wed Mar 31 2010 Silvan Calarco 2009.11.1-1mamba +- update to 2009.11.1 + +* Wed Mar 31 2010 Silvan Calarco 1.3.4-1mamba +- update to 1.3.4 + +* Sun Aug 31 2008 Silvan Calarco 1.1.6-1mamba +- update to 1.1.6 + +* Tue Jan 30 2007 Silvan Calarco 1.1.6-3qilnx +- added mainstone_rr patch + +* Tue Jan 16 2007 Silvan Calarco 1.1.6-2qilnx +- rename u-boot.* to u-boot-%{TARGET_BOARD} + +* Mon Jan 15 2007 Silvan Calarco 1.1.6-1qilnx +- update to version 1.1.6 by autospec + +* Mon Aug 21 2006 Silvan Calarco 1.1.4-1qilnx +- update to version 1.1.4 by autospec + +* Thu Sep 01 2005 Silvan Calarco 1.1.3-2qilnx +- don't rename mkimage because the kernel uses it with this name (make uImage) + +* Wed Aug 31 2005 Silvan Calarco 1.1.3-1qilnx +- package created by autospec