diff --git a/Makefile b/Makefile
index 272d261..8926e95 100644
--- a/Makefile
+++ b/Makefile
@@ -18,6 +18,7 @@ mambadir 	:= ${datadir}/openmamba
 polkitdir 	:= ${datadir}/polkit-1/actions
 dbussystemdir 	:= ${sysconfdir}/dbus-1/system.d
 localesdir 	:= ${datadir}/locale
+libexecdir 	:= /usr/libexec
 
 DESTDIR 	:=
 INSTALL 	:= /usr/bin/install 
@@ -52,12 +53,14 @@ install-dirs:
 	@$(INSTALL_DIR) $(DESTDIR)$(mambadir)/usbinstall/img
 	@$(INSTALL_DIR) $(DESTDIR)$(polkitdir)
 	@$(INSTALL_DIR) $(DESTDIR)$(dbussystemdir)
+	@$(INSTALL_DIR) $(DESTDIR)$(libexecdir)
 
 install: install-dirs install-locales
 	$(INSTALL_PROGRAM) src/usbinstall.py $(DESTDIR)$(mambadir)/usbinstall/usbinstall.py
 	$(INSTALL_SCRIPT) src/usbinstall.sh $(DESTDIR)$(sbindir)/usbinstall
 	$(INSTALL_SCRIPT) src/rootfsinstall.sh $(DESTDIR)$(sbindir)/rootfsinstall
 	$(INSTALL_SCRIPT) src/mmcinstall.sh $(DESTDIR)$(sbindir)/mmcinstall
+	$(INSTALL_SCRIPT) src/init_resize.sh $(DESTDIR)$(libexecdir)/init_resize
 	$(INSTALL_DATA) src/img/*.png $(DESTDIR)$(mambadir)/usbinstall/img/
 	$(INSTALL_DATA) src/org.openmamba.usbinstall.policy $(DESTDIR)$(polkitdir)/org.openmamba.usbinstall.policy
 	$(INSTALL_DATA) src/org.openmamba.usbinstall.conf $(DESTDIR)$(dbussystemdir)/org.openmamba.usbinstall.conf
diff --git a/src/init_resize.sh b/src/init_resize.sh
new file mode 100755
index 0000000..dd6a57b
--- /dev/null
+++ b/src/init_resize.sh
@@ -0,0 +1,164 @@
+#!/bin/sh
+#
+# openmamba - automatically grow root partition at first boot
+# Based on raspi-config init_resize.sh script
+#
+reboot_pi () {
+  umount /boot
+  mount / -o remount,ro
+  sync
+  echo b > /proc/sysrq-trigger
+  sleep 5
+  exit 0
+}
+
+check_commands () {
+  for COMMAND in grep cut sed parted fdisk findmnt resize2fs; do
+    if ! command -v $COMMAND > /dev/null; then
+      FAIL_REASON="$COMMAND not found"
+      return 1
+    fi
+  done
+  return 0
+}
+
+get_variables () {
+  ROOT_PART_DEV=$(findmnt / -o source -n)
+  ROOT_PART_NAME=$(echo "$ROOT_PART_DEV" | cut -d "/" -f 3)
+  ROOT_DEV_NAME=$(echo /sys/block/*/"${ROOT_PART_NAME}" | cut -d "/" -f 4)
+  ROOT_DEV="/dev/${ROOT_DEV_NAME}"
+  ROOT_PART_NUM=$(cat "/sys/block/${ROOT_DEV_NAME}/${ROOT_PART_NAME}/partition")
+
+  BOOT_PART_DEV=$(findmnt /boot -o source -n)
+  BOOT_PART_NAME=$(echo "$BOOT_PART_DEV" | cut -d "/" -f 3)
+  BOOT_DEV_NAME=$(echo /sys/block/*/"${BOOT_PART_NAME}" | cut -d "/" -f 4)
+  BOOT_PART_NUM=$(cat "/sys/block/${BOOT_DEV_NAME}/${BOOT_PART_NAME}/partition")
+
+  OLD_DISKID=$(fdisk -l "$ROOT_DEV" | sed -n 's/Disk identifier: 0x\([^ ]*\)/\1/p')
+
+  ROOT_DEV_SIZE=$(cat "/sys/block/${ROOT_DEV_NAME}/size")
+  TARGET_END=$((ROOT_DEV_SIZE - 1))
+
+  PARTITION_TABLE=$(parted -m "$ROOT_DEV" unit s print | tr -d 's')
+
+  LAST_PART_NUM=$(echo "$PARTITION_TABLE" | tail -n 1 | cut -d ":" -f 1)
+
+  ROOT_PART_LINE=$(echo "$PARTITION_TABLE" | grep -e "^${ROOT_PART_NUM}:")
+  ROOT_PART_START=$(echo "$ROOT_PART_LINE" | cut -d ":" -f 2)
+  ROOT_PART_END=$(echo "$ROOT_PART_LINE" | cut -d ":" -f 3)
+}
+
+fix_partuuid() {
+  mount -o remount,rw "$ROOT_PART_DEV"
+  mount -o remount,rw "$BOOT_PART_DEV"
+  DISKID="$(tr -dc 'a-f0-9' < /dev/hwrng | dd bs=1 count=8 2>/dev/null)"
+  fdisk "$ROOT_DEV" > /dev/null <<EOF
+x
+i
+0x$DISKID
+r
+w
+EOF
+  if [ "$?" -eq 0 ]; then
+    sed -i "s/${OLD_DISKID}/${DISKID}/g" /etc/fstab
+    sed -i "s/${OLD_DISKID}/${DISKID}/" /boot/cmdline.txt
+    sync
+  fi
+
+  mount -o remount,ro "$ROOT_PART_DEV"
+  mount -o remount,ro "$BOOT_PART_DEV"
+}
+
+check_variables () {
+  if [ "$BOOT_DEV_NAME" != "$ROOT_DEV_NAME" ]; then
+      FAIL_REASON="Boot and root partitions are on different devices"
+      return 1
+  fi
+
+  if [ "$ROOT_PART_NUM" -ne "$LAST_PART_NUM" ]; then
+    FAIL_REASON="Root partition should be last partition"
+    return 1
+  fi
+
+  if [ "$ROOT_PART_END" -gt "$TARGET_END" ]; then
+    FAIL_REASON="Root partition runs past the end of device"
+    return 1
+  fi
+
+  if [ ! -b "$ROOT_DEV" ] || [ ! -b "$ROOT_PART_DEV" ] || [ ! -b "$BOOT_PART_DEV" ] ; then
+    FAIL_REASON="Could not determine partitions"
+    return 1
+  fi
+}
+
+check_kernel () {
+  MAJOR="$(uname -r | cut -f1 -d.)"
+  MINOR="$(uname -r | cut -f2 -d.)"
+  if [ "$MAJOR" -eq "4" ] && [ "$MINOR" -lt "9" ]; then
+    return 0
+  fi
+  if [ "$MAJOR" -lt "4" ]; then
+    return 0
+  fi
+  NEW_KERNEL=1
+}
+
+main () {
+  get_variables
+
+  if ! check_variables; then
+    return 1
+  fi
+
+  check_kernel
+
+  if [ "$ROOT_PART_END" -eq "$TARGET_END" ]; then
+    reboot_pi
+  fi
+
+  if ! parted -m "$ROOT_DEV" u s resizepart "$ROOT_PART_NUM" "$TARGET_END"; then
+    FAIL_REASON="Root partition resize failed"
+    return 1
+  fi
+
+  if ! resize2fs "$ROOT_DEV"; then
+    FAIL_REASON="Root filesystem resize failed"
+    return 1
+  fi
+
+  fix_partuuid
+
+  return 0
+}
+
+mount -t proc proc /proc
+mount -t sysfs sys /sys
+mount -t tmpfs tmp /run
+mkdir -p /run/systemd
+
+mount /boot
+mount / -o remount,ro
+
+sed -i 's| init=/usr/share/openmamba/bin/init_resize\.sh||' /boot/cmdline.txt
+sed -i 's| sdhci\.debug_quirks2=4||' /boot/cmdline.txt
+
+if ! grep -q splash /boot/cmdline.txt; then
+  sed -i "s/ quiet//g" /boot/cmdline.txt
+fi
+mount /boot -o remount,ro
+sync
+
+echo 1 > /proc/sys/kernel/sysrq
+
+if ! check_commands; then
+  reboot_pi
+fi
+
+if main; then
+  echo "Resized root filesystem. Rebooting in 5 seconds..."
+else
+  echo "Could not expand filesystem.\n${FAIL_REASON}"
+fi
+sleep 5
+
+reboot_pi
diff --git a/src/rootfsinstall.sh b/src/rootfsinstall.sh
index 69ab58a..49b9b61 100755
--- a/src/rootfsinstall.sh
+++ b/src/rootfsinstall.sh
@@ -195,6 +195,7 @@ case $TARGETDEVICE in
            chipone_ts grub-efi rtl8723bs_bt rtl8723bs axpd acpi_tables_patch $INSTALLPACKAGES"
         REMOVEPACKAGES=""
         FSTAB_ROOT_DEVICE="/dev/sda2"
+        FSTAB_BOOT_DEVICE="/dev/mmcblk0p1"
         ;;
    bpi) ARCH=arm
         BOOTFSTYPE=fat32
@@ -205,32 +206,22 @@ case $TARGETDEVICE in
         INSTALLPACKAGES="kernel-sunxi kernel-sunxi-modules u-boot-sunxi-Bananapi $INSTALLPACKAGES"
         REMOVEPACKAGES="kernel-mamba-arm"
         FSTAB_ROOT_DEVICE="/dev/mmcblk0p2"
+        FSTAB_BOOT_DEVICE="/dev/mmcblk0p1"
         ;;
    rpi) ARCH=arm
         BOOTFSTYPE=fat32
         BOOTFSSIZE=100M
         BOOTFSSTART=0
-        [ "$USEKERNEL" ] || USEKERNEL="zImage-*-rpi"
-        [ "$USEKERNEL2" ] || USEKERNEL2="zImage-*-rpi-v7"
-        [ "$USEKERNEL3" ] || USEKERNEL3="zImage-*-rpi-v7l"
         KERNELDEST="@BOOT@/kernel.img"
         KERNELDEST2="@BOOT@/kernel7.img"
         KERNELDEST3="@BOOT@/kernel7l.img"
         INSTALLPACKAGES="kernel-rpi kernel-rpi-modules raspberrypi-firmware \
 kernel-rpi-v7 kernel-rpi-v7-modules \
 kernel-rpi-v7l kernel-rpi-v7l-modules \
-raspberrypi-utils raspi-config $INSTALLPACKAGES"
+raspberrypi-utils xf86-video-fbturbo $INSTALLPACKAGES"
         REMOVEPACKAGES="kernel-mamba-arm"
-        RPI_FIRMWARE_FILES="bootcode.bin \
-fixup_x.dat start_x.elf \
-fixup4x.dat start4x.elf \
-bcm2708-rpi-b-plus.dtb bcm2708-rpi-b.dtb bcm2708-rpi-cm.dtb \
-bcm2708-rpi-zero-w.dtb bcm2708-rpi-zero.dtb \
-bcm2709-rpi-2-b.dtb bcm2710-rpi-2-b.dtb \
-bcm2710-rpi-3-b-plus.dtb bcm2710-rpi-3-b.dtb \
-bcm2710-rpi-cm3.dtb bcm2711-rpi-4-b.dtb \
-cmdline.txt config.txt"
         FSTAB_ROOT_DEVICE="/dev/mmcblk0p2"
+        FSTAB_BOOT_DEVICE="/dev/mmcblk0p1"
         ;;
    cubox) ARCH=arm
           BOOTFSTYPE=ext3
@@ -354,7 +345,6 @@ if [ "${GROWIMAGE}" ]; then
    resize2fs ${PARTITION2}
 fi
 
-[ "$BOOTFSTYPE" ] && BOOTMP=`mktemp -d -t rootfsinstall.XXXXXXXX`
 ROOTMP=`mktemp -d -t rootfsinstall.XXXXXXXX`
 
 [ -d $ROOTMP ] || {
@@ -369,6 +359,8 @@ mount $PARTITION2 $ROOTMP || {
 trap "[ "$ROOTMP" -a -e $ROOTMP ] && umount $ROOTMP/dev/pts $ROOTMP/dev $ROOTMP/proc $ROOTMP/sys $ROOTMP/run $ROOTMP && rmdir $ROOTMP;[ "$BOOTMP" -a -e $BOOTMP ] && umount $BOOTMP && rmdir $BOOTMP" 0 HUP INT QUIT ABRT KILL TERM
 
 if [ "$BOOTFSTYPE" ]; then
+   BOOTMP=$ROOTMP/boot
+   mkdir $BOOTMP
    mount $PARTITION1 $BOOTMP || {
       echo "ERROR: unable to mount partition $PARTITION1; aborting."
       exit 1
@@ -554,22 +546,12 @@ _EOF
    dd if=$ROOTMP/boot/Bananapi/u-boot-sunxi-with-spl.bin of=${DRIVE} bs=1024 seek=8
    :
 elif [ "$TARGETDEVICE" = "rpi" ]; then
-   # fetch and install firmware files if missing
-   for f in $RPI_FIRMWARE_FILES; do
-      if [ -e $ROOTMP/boot/$f ]; then
-         cp $ROOTMP/boot/$f $BOOTMP/$f
-      elif [ "$f" != "cmdline.txt" -a "$f" != "config.txt" ]; then
-         echo "ERROR: firmware file $f for rpi is missing in /boot directory; aborting."
-         exit 1
-      fi
-   done
-   if [ -e $ROOTMP/boot/overlays ]; then
-      cp -a $ROOTMP/boot/overlays $BOOTMP/
-   fi
-#      IMAGE=`ls $ROOTMP/boot/$USEKERNEL | head -n 1`
-   cp $ROOTMP/boot/$USEKERNEL $KERNELDEST
-   cp $ROOTMP/boot/$USEKERNEL2 $KERNELDEST2
-   cp $ROOTMP/boot/$USEKERNEL3 $KERNELDEST3
+   [ "$USEKERNEL" -a -e $KERNELDEST ] || cp $ROOTMP/boot/$USEKERNEL $KERNELDEST
+   [ "$USEKERNEL2" -a  -e $KERNELDEST2 ] || cp $ROOTMP/boot/$USEKERNEL2 $KERNELDEST2
+   [ "$USEKERNEL3" -a  -e $KERNELDEST3 ] || cp $ROOTMP/boot/$USEKERNEL3 $KERNELDEST3
+
+   [ -e /usr/libexec/init_resize ] && cp /usr/libexec/init_resize ${ROOTMP}/usr/libexec/
+   [ -e ${ROOTMP}/usr/libexec/init_resize ] && CMDLINE_ADD=" init=/usr/libexec/init_resize"
 
    # cmdline.txt : parameters passed to the kernel on boot
    [ ! -e $ROOTMP/boot/cmdline.txt ] && \
@@ -579,7 +561,8 @@ root=/dev/mmcblk0p2 \
 rootfstype=$SYSTEMFSTYPE \
 quiet \
 rootwait \
-splash" > $BOOTMP/cmdline.txt
+splash\
+$CMDLINE_ADD" > $BOOTMP/cmdline.txt
 
    # Create the kernel configuration file
    [ ! -e $ROOTMP/boot/config.txt ] && \
@@ -640,6 +623,12 @@ $FSTAB_ROOT_DEVICE	/	auto	defaults	0	0
 _EOF
 fi
 
+if [ "$FSTAB_BOOT_DEVICE" ]; then
+   cat >> $ROOTMP/etc/fstab << _EOF
+$FSTAB_BOOT_DEVICE	/	auto	defaults	0	2
+_EOF
+fi
+
 if [ "$USEKERNEL" ]; then
    if [ -r $ROOTMP/boot/$USEKERNEL ]; then
       cp $ROOTMP/boot/$USEKERNEL $KERNELDEST || {