usbinstall/src/usbinstall.sh

#!/bin/bash
#usbinstall.sh
# Arg 1: usb device for installation
# Arg 2: boot file
# Arg 3: iso file


#~ # openmamba-usbinstall è uno script per la generazione automatica di una chiavetta di boot per openmamba snapshot.
#~ # Se i file necessari sono presenti sul disco fisso verranno utilizzati quelli altrimenti
#~ # scaricherà direttamente la versione attuale dal sito di openmamba.
#~ # se il file iso è presente nella home verrà usato direttamente altrimenti si aprirà un dialogo dove sarà possibile cercarlo.
#~ # (c) 2009 ercole 'ercolinux' carpanetto - ercole69@gmail.com
#~ # (c) 2009-2013 Silvan Calarco - silvan.calarco@mambasoft.it
# License: GPL v.3


#%Changelog:
# 17/10/11 (michiamophil)
#	* Script modificato organizzando il codice in funzioni, chiamate dal modulo installazione.py
# 06/01/12 (michiamophil)
#	* "sudo u/mount -> udisks" 
#	* export $1, $2, $3 -> OPENMAMBA_*
# 08/01/12 (michiamophil)
#	* INITIAL-CHECK

TEXTDOMAINDIR=/usr/share/locale/
TEXTDOMAIN=usbinstall


#=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
#-------------------------------------(DBUS)-----------------------------------------
#=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
function dbus_properties_get_string() {
   REPLY=`dbus-send --system --print-reply --dest=$1 $2 \
org.freedesktop.DBus.Properties.Get string:$3 string:"$4"`
   [ $? -eq 0 ] || return 1
   echo $REPLY | sed "s|.*string.*\"\(.*\)\"|\1|"
   return 0
}

function dbus_properties_get_stringlist() {
# FIXME: only returns first element
   REPLY=`dbus-send --system --print-reply --dest=$1 $2 \
org.freedesktop.DBus.Properties.Get string:$3 string:"$4"`
   [ $? -eq 0 ] || return 1
   echo $REPLY | sed "s|.*array.*\[ string \"\(.*\)\" ]|\1|"
   return 0
}

function dbus_properties_get_uint64() {
   REPLY=`dbus-send --system --print-reply --dest=$1 $2 \
org.freedesktop.DBus.Properties.Get string:$3 string:$4`
   [ $? -eq 0 ] || return 1
   echo $REPLY | sed "s|.*uint64 \(.*\)|\1|"
   return 0
}

function dbus_properties_get_bool() {
   REPLY=`dbus-send --system --print-reply --dest=$1 $2 org.freedesktop.DBus.Properties.Get string:$3 string:"$4"`
   [ $? -eq 0 ] || return 1
   echo $REPLY | sed "s|.*boolean \(.*\)|\1|"
   return 0
}


# Set progressbar (only if $DBUS_USBINSTALL = 1)
# Arg 1: value%
set_pbar()
{
	if [ "$DBUS_USBINSTALL" == "1" ]; then
		dbus-send --system --print-reply --dest=org.openmamba.usbinstall /org/openmamba/usbinstall org.openmamba.usbinstall.Set_progressBar int32:$1 &>/dev/null
		if [ "$?" != "0" ]; then
			[ "$CPPID" ] && kill -9 $CPPID
			exit 1
		fi
	fi
}

# Set status label (only if $DBUS_USBINSTALL = 1)
# Arg 1: string
set_status()
{
	if [ "$DBUS_USBINSTALL" == "1" ]; then
		dbus-send --system --print-reply --dest=org.openmamba.usbinstall /org/openmamba/usbinstall org.openmamba.usbinstall.Set_description "string:$1" &>/dev/null
		if [ "$?" != "0" ]; then
			[ "$CPPID" ] && kill -9 $CPPID
			exit 1
		fi
	fi
}

# Terminate the frontend (only if $DBUS_USBINSTALL = 1)
exit_frontend()
{
	
	if [ "$DBUS_USBINSTALL" == "1" ]; then
		dbus-send --system --print-reply --dest=org.openmamba.usbinstall /org/openmamba/usbinstall org.openmamba.usbinstall.Exit "string:$1" &>/dev/null
		if [ "$?" != "0" ]; then
			[ "$CPPID" ] && kill -9 $CPPID
			exit 1
		fi
	fi
}

####################################(DBUS)###########################################


function errorAndExit()
{
	echo "$1"
	# Se l'argomento 2 è settato stampa anche l'help
	if [ -n "$2" ]; then
		usage
	fi
	exit_frontend "$1" # Termina il frontend con codice di errore 1
	exit 1
}

function usage()
{
	echo $"usbinstall: install openmamba into your usb key!"
	echo -e "\t"$"Usage: sudo usbinstall Arg1 Arg2 Arg3 [-y]"
	echo -e "\t"$"Arg 1: Usb device path (e.g. /dev/sdc)"
	echo -e "\t"$"Arg 2: Cpio.gz file (e.g. ~/openmamba-bootusb-it-milestone2-2.0pre8.i586.cpio.gz)"
	echo -e "\t"$"Arg 3: ISO file (e.g. ~/openmamba-livecd-it-milestone2-2.0pre8.i586.iso)"
	echo -e "\t"$"-y: install without asking confirmation [Be careful!]"
}


#=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
#--------------------------------(INITIAL-CHECK)-------------------------------------
#=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
# Confirm
if [ "$4" = "-y" ]; then
	CONFIRM=0
elif [ "$4" = "-d" ]; then
	CONFIRM=0
	DBUS_USBINSTALL=1	# First set this
else
	CONFIRM=1
fi

# Help
if [ "$1" = "-h" -o "$1" = "--help" ]; then
	usage
	exit 0
fi

# Check if usbinstall have root permission
if [ "`id -u`" != 0 ]; then
	errorAndExit $"Error: usbinstall must be run as root" 1
fi

# Check if Arg 1 is valid
if [ -b "$1" ]; then	# If is a block device
	ISKEY=`dbus_properties_get_bool org.freedesktop.UDisks /org/freedesktop/UDisks/devices/${1/*\/} \
		org.freedesktop.UDisks.Device DeviceIsRemovable`
	if [ "$ISKEY" = "true" ]; then	# If is a usb
		export SELECT_USB=$1
	else # If not, user can choose
		echo $"Warning: you haven't choosen a removable device ($1). Are you sure to continue? [yes/no]"
		read KEY
		case "$KEY" in
			$yes)
				export SELECT_USB=$1
				;;
			*)
				errorAndExit $"Installation aborted"
				;;
		esac
	fi
else
	errorAndExit $"Error(Arg 1): \"$1\" isn't a block device" 1
fi

# Check if Arg 2 is valid (it can be null)
if ["$2" ]; then
   if [ -r "$2" ]; then	# Chek is is readable
      # Check if Arg 2 is a gz file
      if [ "${2##*.}" != "gz" ]; then
         errorAndExit "Error(Arg 2): you must chose a cpio.gz file" 1
      fi
      export SELECT_BOOT=$2
   else
      errorAndExit $"Error(Arg 2): \"$2\" is not readable" 1
   fi
fi

# Check if Arg 3 is valid
if [ -r "$3" ]; then	# Chek is is readable
   # Check if Arg 3 is an iso file
   if [ "${3##*.}" != "iso" ]; then
      errorAndExit "Error(Arg 3): you must chose a ISO (.iso) file" 1
   fi
   SELECT_ISO=`readlink -f $3`
else
   errorAndExit "Error(Arg 3): \"$3\" is not readable" 1
fi

#################################(INITIAL-CHECK)#####################################




#=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
#--------------------------------(INSTALLATION)--------------------------------------
#=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
export LOGFILE=/var/log/usbinstall.log
trap "[ \"$CPPID\" ] && kill -9 $CPPID" HUP INT QUIT ABRT KILL TERM
set_status $"Unmount usb device"
echo $"Unmount usb device"

DEVICEISMOUNTED=`dbus_properties_get_bool org.freedesktop.UDisks /org/freedesktop/UDisks/devices/${SELECT_USB/*\/}1 \
org.freedesktop.UDisks.Device DeviceIsMounted`

if [ "$DEVICEISMOUNTED" = "true" ]; then
   LANG=C udisks --unmount ${SELECT_USB}1 | grep failed && { 
	errorAndExit $"Error: fail to umount the usb key (${SELECT_USB}1)"
   }
fi
set_pbar 2

# Prima di formattare :P
if [ "$CONFIRM" = "1" ]; then
	echo $"Warning: You are going to format this device ($1). Are you sure to continue? [yes/no]"
	read KEY
		case "$KEY" in
			$"yes"|"Y"|"y")
				;;
			*)
				errorAndExit $"Installation aborted"
				;;
		esac
fi

set_status $"Partitioning $SELECT_USB..."
echo $"Partitioning $SELECT_USB..."
# Start from a new partition table
sudo parted -s $SELECT_USB mktable msdos &>>$LOGFILE
if [ "$?" != "0" ]; then
   errorAndExit $"Error:"" \"parted\" "$"exit with error (see $LOGFILE)"
fi
# EFI partition
sudo parted -s -a optimal -- $SELECT_USB mkpart primary fat32 0 20M &>>$LOGFILE
if [ "$?" != "0" ]; then
   errorAndExit $"Error:"" \"parted\" "$"exit with error (see $LOGFILE)"
fi
# openmamba partition
sudo parted -s -a optimal -- $SELECT_USB mkpart primary ext4 20M -1 &>>$LOGFILE
if [ "$?" != "0" ]; then
   errorAndExit $"Error:"" \"parted\" "$"exit with error (see $LOGFILE)"
fi
# boot flag on openmamba partition
sudo parted -s $SELECT_USB set 2 boot on &>>$LOGFILE
if [ "$?" != "0" ]; then
   errorAndExit $"Error:"" \"parted\" "$"exit with error (see $LOGFILE)"
fi

set_pbar 5

set_status $"Formatting $SELECT_USB..."
echo $"Formatting $SELECT_USB..."
sudo mkfs.vfat ${SELECT_USB}1 -n EFI &>>$LOGFILE
if [ "$?" != "0" ]; then
   errorAndExit $"Error:"" \"mkfs.vfat\" "$"exit with error (see $LOGFILE)"
fi
sudo mkfs.ext4 ${SELECT_USB}2 -L openmamba_live &>>$LOGFILE
if [ "$?" != "0" ]; then
   errorAndExit $"Error:"" \"mkfs.ext4\" "$"exit with error (see $LOGFILE)"
fi

sleep 1
LANG=C udisks --mount ${SELECT_USB}1 &>>$LOGFILE
if [ "$?" != "0" ]; then
   errorAndExit $"Error:"" \"udisks --mount\" "$"exit with error (see $LOGFILE)"
fi
LANG=C udisks --mount ${SELECT_USB}2 &>>$LOGFILE
if [ "$?" != "0" ]; then
   errorAndExit $"Error:"" \"udisks --mount\" "$"exit with error (see $LOGFILE)"
fi
set_pbar 30

# Riceve la mountdir della chiavetta da dbus
MOUNTDIR_EFI=`dbus_properties_get_stringlist org.freedesktop.UDisks /org/freedesktop/UDisks/devices/${SELECT_USB/*\/}1 \
org.freedesktop.UDisks.Device DeviceMountPaths`

if [ ! -d "$MOUNTDIR_EFI" ]; then
   errorAndExit $"Error: unable to found usb mount path"
fi

# create EFI grub 32 and 64 bit images
mkdir -p $MOUNTDIR_EFI/EFI/BOOT/
grub-mkimage -o $MOUNTDIR_EFI/EFI/BOOT/bootx64.efi -O x86_64-efi -p /efi/boot \
   part_gpt part_msdos ntfs ntfscomp hfsplus fat ext2 normal chain boot linux echo \
   help gfxterm gettext png efi_gop efi_uga search search_label search_fs_uuid || {
   errorAndExit $"Error: unable to create GRUB x86_64-efi image"
}

# 32bit EFI optional because untested and curently missing in x86_64 arch
[ -d /usr/lib/grub/i386-efi ] && \
grub-mkimage -o $MOUNTDIR_EFI/EFI/BOOT/bootia32.efi -O i386-efi -p /efi/boot \
   part_gpt part_msdos ntfs ntfscomp hfsplus fat ext2 normal chain boot linux echo \
   help gfxterm gettext png efi_gop efi_uga search search_label search_fs_uuid || {
   errorAndExit $"Error: unable to create GRUB i386-efi image"
}

# Riceve la mountdir della chiavetta da dbus
MOUNTDIR=`dbus_properties_get_stringlist org.freedesktop.UDisks /org/freedesktop/UDisks/devices/${SELECT_USB/*\/}2 \
org.freedesktop.UDisks.Device DeviceMountPaths`

if [ ! -d "$MOUNTDIR" ]; then
   errorAndExit $"Error: unable to found usb mount path"
fi

pushd $MOUNTDIR >/dev/null

set_status $"Copying ISO..."
echo $"Copying ISO..."
# Copy code
ORIG_SIZE=`stat -c %s $SELECT_ISO`
cp $SELECT_ISO ./ &
export CPPID=$!
DEST_SIZE=0
DEST_FILE=./"`basename $SELECT_ISO`"
ps $CPPID >/dev/null
while [ $? -eq 0 ]; do
    if [ -e $DEST_FILE ]; then
	DEST_SIZE=$(stat -c %s $DEST_FILE)
	percentuale=$((30 + ( 50 * $DEST_SIZE ) / $ORIG_SIZE ))
	set_pbar $percentuale
    fi
    sleep 2
    ps $CPPID >/dev/null
done
ln -fs `basename $SELECT_ISO` ./openmamba-live.iso

sudo chmod 777 ./
if [ "$SELECT_BOOT" ]; then
   set_status $"Extracting bootusb archive..."
   echo $"Extracting bootusb archive..."
   gunzip -c $SELECT_BOOT | cpio -i
   if [ ! -d "./boot" ]; then
      errorAndExit $"Error: Invalid bootusb archive"
   fi
else
   set_status $"Extracting bootloader data from ISO image..."
   echo $"Extracting bootloader data from ISO image..."
   ISOMOUNTDIR=`mktemp -d --suffix=.usbinstall`
   mount -o loop $SELECT_ISO $ISOMOUNTDIR || {
      errorAndExit $"Error: unable to mount ISO image"
   }
   mkdir boot
   cp $ISOMOUNTDIR/boot/{initrd*,vmlinuz*} boot/
   cp $ISOMOUNTDIR/boot/isolinux/* boot/
   mv boot/isolinux.cfg boot/extlinux.conf
   sed -i "s|root=[^[:space:]]*|root=live:/openmamba_live/openmamba-live.iso|" boot/extlinux.conf
   cp /usr/share/syslinux/{libcom32,libutil,vesamenu}.c32 boot/ || {
      errorAndExit $"Error: can't copy some files to /boot directory"
   }
   rm -f boot/isolinux*
   umount $ISOMOUNTDIR
   rmdir $ISOMOUNTDIR

   # basic extlinux.conf -> grub.cfg conversion
   echo "search --no-floppy --label --set=root openmamba_live" > $MOUNTDIR_EFI/EFI/BOOT/grub.cfg
   while read line; do
      case $line in
         "MENU LABEL "*) [ "$CURR_BRACKET_OPEN" = "1" ] && echo "}" >> $MOUNTDIR_EFI/EFI/BOOT/grub.cfg
                         echo "menuentry \"${line/MENU LABEL }\" {" >> $MOUNTDIR_EFI/EFI/BOOT/grub.cfg
                         CURR_BRACKET_OPEN=1
                         ;;
         "kernel "*) CURR_KERNEL="${line/kernel }"
                      echo "echo \"Loading ${CURR_KERNEL}\"" >> $MOUNTDIR_EFI/EFI/BOOT/grub.cfg
                      ;;
         "append "*) set -- ${line/append initrd=}
                      CURR_INITRD="$1"
                      CURR_CMDLINE="${line/append initrd=$CURR_INITRD}"
                      echo "linux ${CURR_KERNEL} ${CURR_CMDLINE}" >> $MOUNTDIR_EFI/EFI/BOOT/grub.cfg
                      echo "echo \"Loading ${CURR_INITRD}\"" >> $MOUNTDIR_EFI/EFI/BOOT/grub.cfg
                      echo "initrd ${CURR_INITRD}" >> $MOUNTDIR_EFI/EFI/BOOT/grub.cfg
                      echo "}" >> $MOUNTDIR_EFI/EFI/BOOT/grub.cfg
                      CURR_BRACKET_OPEN=0
                      ;;
      esac
   done < boot/extlinux.conf
   [ "$CURR_BRACKET_OPEN" = "1" ] && echo "}" >> $MOUNTDIR_EFI/EFI/BOOT/grub.cfg
fi
set_pbar 85

set_status $"Writing bootloader..."
echo $"Writing bootloader..."
sudo extlinux --install boot
set_pbar 90

popd >/dev/null
sync
set_pbar 95

set_status $"Unmount usb device"
echo $"Unmount usb device"
LANG=C udisks --unmount ${SELECT_USB}1 | grep failed && {
	errorAndExit $"Error: fail to umount the usb key (${SELECT_USB}1)"
}
LANG=C udisks --unmount ${SELECT_USB}2 | grep failed && {
	errorAndExit $"Error: fail to umount the usb key (${SELECT_USB}2)"
}

# WARNING: calling install-mbr after unmounting to prevent problems of FAT since EFI partition introduction
sudo install-mbr $SELECT_USB

set_pbar 100
exit_frontend ""
echo $"Done!"
#################################(INSTALLATION)######################################