54 lines
1.4 KiB
Plaintext
54 lines
1.4 KiB
Plaintext
openmamba 512MB live flash system - installation instructions
|
|
=============================================================
|
|
|
|
This instructions explan how to install this
|
|
openmamba distribution on a usb storage
|
|
|
|
|
|
Requirements
|
|
============
|
|
|
|
a Unix system with the following commands:
|
|
|
|
extlinux, mkfs.ext2, fdisk, gunzip, cpio, mount, umount
|
|
|
|
|
|
Installation
|
|
============
|
|
|
|
1st step) Partitioning the USB storage device
|
|
|
|
- insert the storage and identify its device name (e.g. /dev/sda)
|
|
- make sure that no partitions are mounted for the device
|
|
- run fdisk or cfdisk and create a partition that is at least 1GB large
|
|
- mark the partition as "bootable"
|
|
- identify the device corresponding to the partitiong (e.g. /dev/sda1)
|
|
|
|
2nd step) Formatting the device
|
|
|
|
- run:
|
|
|
|
mkfs.ext3 > <partition device>
|
|
|
|
3rd step) Installing the cpio image
|
|
|
|
mount <partition device> <mount point>
|
|
cd <mount point>
|
|
gunzip -c < openmamba-flash-512MB-rootfs-i586.cpio.gz | cpio -i
|
|
|
|
4th step) Installing extlinux bootloader
|
|
|
|
extlinux --install boot
|
|
|
|
unmount the storage and that's all.
|
|
|
|
Running the system
|
|
==================
|
|
Reboot your computer with the USB storage inserted in.
|
|
Your computer maybe configured or not for booting from a
|
|
USB Hard Drive/Storage device; check your bios configuration and
|
|
whether it supports booting from USB (many bioses are buggy!).
|
|
|
|
|
|
Copyright (c) by Silvan Calarco <silvan.calarco@mambasoft.it>
|