Autotools gettext support with initial italian translation for distroquery

This commit is contained in:
Silvan Calarco 2013-10-14 01:47:12 +02:00
parent c872356be3
commit 18e522572b
25 changed files with 3268 additions and 36 deletions

1282
ABOUT-NLS Normal file

File diff suppressed because it is too large Load Diff

View File

@ -1,3 +1,10 @@
2013-10-14 gettextize <bug-gnu-gettext@gnu.org>
* Makefile.am (SUBDIRS): Add po.
(ACLOCAL_AMFLAGS): New variable.
(EXTRA_DIST): Add config/config.rpath, m4/ChangeLog.
* configure.ac (AC_CONFIG_FILES): Add po/Makefile.in.
Changes in version 1.1.3 Changes in version 1.1.3
Mon Feb 7 2011 Silvan Calarco <silvan.calarco@mambasoft.it> Mon Feb 7 2011 Silvan Calarco <silvan.calarco@mambasoft.it>
- fixed a crash evaluating missing versioned requirements by cycling numproviders inside numersions cicle - fixed a crash evaluating missing versioned requirements by cycling numproviders inside numersions cicle

View File

@ -18,9 +18,9 @@ auxdir = @ac_aux_dir@
AUTOMAKE_OPTIONS = 1.8 dist-bzip2 foreign nostdinc no-dist-gzip AUTOMAKE_OPTIONS = 1.8 dist-bzip2 foreign nostdinc no-dist-gzip
SUBDIRS = $(auxdir) html src src/include SUBDIRS = po $(auxdir) html src src/include
EXTRA_DIST = AUTHORS COPYING ChangeLog VERSION distromatic.conf EXTRA_DIST = config/config.rpath m4/ChangeLog AUTHORS COPYING ChangeLog VERSION distromatic.conf
install-data-local: install-data-local:
$(mkdir_p) $(DESTDIR)$(sysconfdir) $(mkdir_p) $(DESTDIR)$(sysconfdir)
@ -32,3 +32,33 @@ dist-rpm: dist-bzip2
{ echo "directory not found: $$rpm_sourcedir" 1>&2; exit 1; };\ { echo "directory not found: $$rpm_sourcedir" 1>&2; exit 1; };\
mv -f $(distdir).tar.bz2 $$rpm_sourcedir || exit 1; \ mv -f $(distdir).tar.bz2 $$rpm_sourcedir || exit 1; \
echo "Created tarball \`$$rpm_sourcedir/$(distdir).tar.bz2'." echo "Created tarball \`$$rpm_sourcedir/$(distdir).tar.bz2'."
ACLOCAL_AMFLAGS = -I m4
check-gettext:
@if test x$(USE_NLS) != "xyes" ; then echo "Missing gettext. Rerun configure and check for" \
"'checking whether to use NLS... yes'!" ; exit 1 ; fi
update-po: check-gettext
@find $(srcdir)/src/ -name "*.cpp" -print | sort > $(srcdir)/po/POTFILES.in.2 ; \
if diff $(srcdir)/po/POTFILES.in $(srcdir)/po/POTFILES.in.2 >/dev/null 2>&1 ; then \
rm -f $(srcdir)/po/POTFILES.in.2 ; \
else \
mv $(srcdir)/po/POTFILES.in.2 $(srcdir)/po/POTFILES.in ; \
fi
cd po && $(MAKE) $(AM_MAKEFLAGS) update-po
update-gmo: check-gettext
cd po && $(MAKE) $(AM_MAKEFLAGS) update-gmo
force-update-gmo: check-gettext
touch po/*.po
cd po && $(MAKE) $(AM_MAKEFLAGS) update-gmo
force-update-gmo-%: check-gettext
@language=`echo $@ | sed s/force-update-gmo-//` ; \
if test ! -f po/$$language.po ; then echo "file po/$$language.po does not exist" ; exit 1 ; fi ; \
touch po/$$language.po ; \
cd po && $(MAKE) $(AM_MAKEFLAGS) update-gmo
.PHONY: check-gettext update-po update-gmo force-update-gmo

View File

@ -59,6 +59,8 @@ AC_CANONICAL_TARGET
AM_INIT_AUTOMAKE([1.7 foreign dist-bzip2 nostdinc]) AM_INIT_AUTOMAKE([1.7 foreign dist-bzip2 nostdinc])
AM_GNU_GETTEXT([external])
AC_REVISION($Revision: 1.4 $) AC_REVISION($Revision: 1.4 $)
dnl Determine a C compiler to use. Define `CFLAGS', `EXEEXT', `OBJEXT' dnl Determine a C compiler to use. Define `CFLAGS', `EXEEXT', `OBJEXT'
@ -227,7 +229,7 @@ dnl ------------------------------------------------------------
dnl Generate the output files dnl Generate the output files
dnl ------------------------------------------------------------ dnl ------------------------------------------------------------
AC_CONFIG_FILES([Makefile] AC_CONFIG_FILES([Makefile po/Makefile.in]
[config/Makefile] [config/Makefile]
[html/Makefile] [html/Makefile]
[html/index.php] [html/index.php]

12
po/ChangeLog Normal file
View File

@ -0,0 +1,12 @@
2013-10-14 gettextize <bug-gnu-gettext@gnu.org>
* Makefile.in.in: New file, from gettext-0.18.3.
* Rules-quot: New file, from gettext-0.18.3.
* boldquot.sed: New file, from gettext-0.18.3.
* en@boldquot.header: New file, from gettext-0.18.3.
* en@quot.header: New file, from gettext-0.18.3.
* insert-header.sin: New file, from gettext-0.18.3.
* quot.sed: New file, from gettext-0.18.3.
* remove-potcdate.sin: New file, from gettext-0.18.3.
* POTFILES.in: New file.

1
po/LINGUAS Normal file
View File

@ -0,0 +1 @@
it

555
po/Makefile Normal file
View File

@ -0,0 +1,555 @@
# Makefile for PO directory in any package using GNU gettext.
# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
#
# This file can be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU General Public
# License but which still want to provide support for the GNU gettext
# functionality.
# Please note that the actual code of GNU gettext is covered by the GNU
# General Public License and is *not* in the public domain.
#
# Origin: gettext-0.18.3
GETTEXT_MACRO_VERSION = 0.18
PACKAGE = distromatic
VERSION = 1.4.1
PACKAGE_BUGREPORT = silvan.calarco@mambasoft.it
SED = /bin/sed
SHELL = /bin/sh
srcdir = .
top_srcdir = ..
prefix = /usr
exec_prefix = ${prefix}
datarootdir = ${prefix}/share
datadir = ${datarootdir}
localedir = ${datarootdir}/locale
gettextsrcdir = $(datadir)/gettext/po
INSTALL = /bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
# We use $(mkdir_p).
# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
# ${SHELL} /usr/src/RPM/BUILD/distromatic/config/install-sh does not start with $(SHELL), so we add it.
# In automake >= 1.10, $(MKDIR_P) is derived from ${MKDIR_P}, which is defined
# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
# versions, $(mkinstalldirs) and $(install_sh) are unused.
mkinstalldirs = $(SHELL) ${SHELL} /usr/src/RPM/BUILD/distromatic/config/install-sh -d
install_sh = $(SHELL) ${SHELL} /usr/src/RPM/BUILD/distromatic/config/install-sh
MKDIR_P = /bin/mkdir -p
mkdir_p = $(MKDIR_P)
GMSGFMT_ = /usr/bin/msgfmt
GMSGFMT_no = /usr/bin/msgfmt
GMSGFMT_yes = /usr/bin/msgfmt
GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
MSGFMT_ = /usr/bin/msgfmt
MSGFMT_no = /usr/bin/msgfmt
MSGFMT_yes = /usr/bin/msgfmt
MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
XGETTEXT_ = /usr/bin/xgettext
XGETTEXT_no = /usr/bin/xgettext
XGETTEXT_yes = /usr/bin/xgettext
XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
MSGMERGE = msgmerge
MSGMERGE_UPDATE = /usr/bin/msgmerge --update
MSGINIT = msginit
MSGCONV = msgconv
MSGFILTER = msgfilter
POFILES = it.po
GMOFILES = it.gmo
UPDATEPOFILES = it.po-update
DUMMYPOFILES = it.nop
DISTFILES.common = Makefile.in.in remove-potcdate.sin \
$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
$(POFILES) $(GMOFILES) \
$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
POTFILES = \
../src/distroquery.c
CATALOGS = it.gmo
# Makevars gets inserted here. (Don't remove this line!)
# Makefile variables for PO directory in any package using GNU gettext.
# Usually the message domain is the same as the package name.
DOMAIN = $(PACKAGE)
# These two variables depend on the location of this directory.
subdir = po
top_builddir = ..
# These options get passed to xgettext.
XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
# This is the copyright holder that gets inserted into the header of the
# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
# package. (Note that the msgstr strings, extracted from the package's
# sources, belong to the copyright holder of the package.) Translators are
# expected to transfer the copyright for their translations to this person
# or entity, or to disclaim their copyright. The empty string stands for
# the public domain; in this case the translators are expected to disclaim
# their copyright.
COPYRIGHT_HOLDER = Silvan Calarco <silvan.calarco@mambasoft.it>
# This is the email address or URL to which the translators shall report
# bugs in the untranslated strings:
# - Strings which are not entire sentences, see the maintainer guidelines
# in the GNU gettext documentation, section 'Preparing Strings'.
# - Strings which use unclear terms or require additional context to be
# understood.
# - Strings which make invalid assumptions about notation of date, time or
# money.
# - Pluralisation problems.
# - Incorrect English spelling.
# - Incorrect formatting.
# It can be your email address, or a mailing list address where translators
# can write to without being subscribed, or the URL of a web page through
# which the translators can contact you.
MSGID_BUGS_ADDRESS =
# This is the list of locale categories, beyond LC_MESSAGES, for which the
# message catalogs shall be used. It is usually empty.
EXTRA_LOCALE_CATEGORIES =
# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
# context. Possible values are "yes" and "no". Set this to yes if the
# package uses functions taking also a message context, like pgettext(), or
# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
USE_MSGCTXT = no
# These options get passed to msgmerge.
# Useful options are in particular:
# --previous to keep previous msgids of translated messages,
# --quiet to reduce the verbosity.
MSGMERGE_OPTIONS =
.SUFFIXES:
.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
.po.mo:
@echo "$(MSGFMT) -c -o $@ $<"; \
$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
.po.gmo:
@lang=`echo $* | sed -e 's,.*/,,'`; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
.sin.sed:
sed -e '/^#/d' $< > t-$@
mv t-$@ $@
all: all-yes
all-yes: stamp-po
all-no:
# Ensure that the gettext macros and this Makefile.in.in are in sync.
CHECK_MACRO_VERSION = \
test "$(GETTEXT_MACRO_VERSION)" = "0.18" \
|| { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version 0.18" 1>&2; \
exit 1; \
}
# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
# we don't want to bother translators with empty POT files). We assume that
# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
# In this case, stamp-po is a nop (i.e. a phony target).
# stamp-po is a timestamp denoting the last time at which the CATALOGS have
# been loosely updated. Its purpose is that when a developer or translator
# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
# invocations of "make" will do nothing. This timestamp would not be necessary
# if updating the $(CATALOGS) would always touch them; however, the rule for
# $(POFILES) has been designed to not touch files that don't need to be
# changed.
stamp-po: $(srcdir)/$(DOMAIN).pot
@$(CHECK_MACRO_VERSION)
test ! -f $(srcdir)/$(DOMAIN).pot || \
test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
@test ! -f $(srcdir)/$(DOMAIN).pot || { \
echo "touch stamp-po" && \
echo timestamp > stamp-poT && \
mv stamp-poT stamp-po; \
}
# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
# otherwise packages like GCC can not be built if only parts of the source
# have been downloaded.
# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
# The determination of whether the package xyz is a GNU one is based on the
# heuristic whether some file in the top level directory mentions "GNU xyz".
# If GNU 'find' is available, we avoid grepping through monster files.
$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep 'GNU distromatic' /dev/null '{}' ';' 2>/dev/null; \
else \
LC_ALL=C grep 'GNU distromatic' $(top_srcdir)/* 2>/dev/null; \
fi; \
} | grep -v 'libtool:' >/dev/null; then \
package_gnu='GNU '; \
else \
package_gnu=''; \
fi; \
if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
else \
msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
fi; \
case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
--add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
--files-from=$(srcdir)/POTFILES.in \
--copyright-holder='$(COPYRIGHT_HOLDER)' \
--msgid-bugs-address="$$msgid_bugs_address" \
;; \
*) \
$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
--add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
--files-from=$(srcdir)/POTFILES.in \
--copyright-holder='$(COPYRIGHT_HOLDER)' \
--package-name="$${package_gnu}distromatic" \
--package-version='1.4.1' \
--msgid-bugs-address="$$msgid_bugs_address" \
;; \
esac
test ! -f $(DOMAIN).po || { \
if test -f $(srcdir)/$(DOMAIN).pot; then \
sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
else \
rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
fi; \
else \
mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
fi; \
}
# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
# every "make" invocation, only create it when it is missing.
# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
$(srcdir)/$(DOMAIN).pot:
$(MAKE) $(DOMAIN).pot-update
# This target rebuilds a PO file if $(DOMAIN).pot has changed.
# Note that a PO file is not touched if it doesn't need to be changed.
$(POFILES): $(srcdir)/$(DOMAIN).pot
@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
if test -f "$(srcdir)/$${lang}.po"; then \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
cd $(srcdir) \
&& { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
*) \
$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
esac; \
}; \
else \
$(MAKE) $${lang}.po-create; \
fi
install: install-exec install-data
install-exec:
install-data: install-data-yes
if test "$(PACKAGE)" = "gettext-tools"; then \
$(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
for file in $(DISTFILES.common) Makevars.template; do \
$(INSTALL_DATA) $(srcdir)/$$file \
$(DESTDIR)$(gettextsrcdir)/$$file; \
done; \
for file in Makevars; do \
rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
done; \
else \
: ; \
fi
install-data-no: all
install-data-yes: all
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
$(mkdir_p) $(DESTDIR)$$dir; \
if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
$(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
if test -n "$$lc"; then \
if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
(cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
for file in *; do \
if test -f $$file; then \
ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
fi; \
done); \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
else \
if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
:; \
else \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
fi; \
fi; \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
fi; \
done; \
done
install-strip: install
installdirs: installdirs-exec installdirs-data
installdirs-exec:
installdirs-data: installdirs-data-yes
if test "$(PACKAGE)" = "gettext-tools"; then \
$(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
else \
: ; \
fi
installdirs-data-no:
installdirs-data-yes:
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
$(mkdir_p) $(DESTDIR)$$dir; \
for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
if test -n "$$lc"; then \
if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
(cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
for file in *; do \
if test -f $$file; then \
ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
fi; \
done); \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
else \
if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
:; \
else \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
fi; \
fi; \
fi; \
done; \
done
# Define this as empty until I found a useful application.
installcheck:
uninstall: uninstall-exec uninstall-data
uninstall-exec:
uninstall-data: uninstall-data-yes
if test "$(PACKAGE)" = "gettext-tools"; then \
for file in $(DISTFILES.common) Makevars.template; do \
rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
done; \
else \
: ; \
fi
uninstall-data-no:
uninstall-data-yes:
catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
done; \
done
check: all
info dvi ps pdf html tags TAGS ctags CTAGS ID:
mostlyclean:
rm -f remove-potcdate.sed
rm -f stamp-poT
rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
rm -fr *.o
clean: mostlyclean
distclean: clean
rm -f Makefile Makefile.in POTFILES *.mo
maintainer-clean: distclean
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
rm -f stamp-po $(GMOFILES)
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
dist distdir:
$(MAKE) update-po
@$(MAKE) dist2
# This is a separate target because 'update-po' must be executed before.
dist2: stamp-po $(DISTFILES)
dists="$(DISTFILES)"; \
if test "$(PACKAGE)" = "gettext-tools"; then \
dists="$$dists Makevars.template"; \
fi; \
if test -f $(srcdir)/$(DOMAIN).pot; then \
dists="$$dists $(DOMAIN).pot stamp-po"; \
fi; \
if test -f $(srcdir)/ChangeLog; then \
dists="$$dists ChangeLog"; \
fi; \
for i in 0 1 2 3 4 5 6 7 8 9; do \
if test -f $(srcdir)/ChangeLog.$$i; then \
dists="$$dists ChangeLog.$$i"; \
fi; \
done; \
if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
for file in $$dists; do \
if test -f $$file; then \
cp -p $$file $(distdir) || exit 1; \
else \
cp -p $(srcdir)/$$file $(distdir) || exit 1; \
fi; \
done
update-po: Makefile
$(MAKE) $(DOMAIN).pot-update
test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
$(MAKE) update-gmo
# General rule for creating PO files.
.nop.po-create:
@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
exit 1
# General rule for updating PO files.
.nop.po-update:
@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
tmpdir=`pwd`; \
echo "$$lang:"; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
cd $(srcdir); \
if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
$(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
*) \
$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
esac; \
}; then \
if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
rm -f $$tmpdir/$$lang.new.po; \
else \
if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
:; \
else \
echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
exit 1; \
fi; \
fi; \
else \
echo "msgmerge for $$lang.po failed!" 1>&2; \
rm -f $$tmpdir/$$lang.new.po; \
fi
$(DUMMYPOFILES):
update-gmo: Makefile $(GMOFILES)
@:
# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
# because execution permission bits may not work on the current file system.
# Use /bin/sh, which is the shell determined by autoconf for the use by its
# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
Makefile: Makefile.in.in Makevars $(top_builddir)/config.status POTFILES.in LINGUAS
cd $(top_builddir) \
&& /bin/sh ./config.status $(subdir)/$@.in po-directories
force:
# Tell versions [3.59,3.63) of GNU make not to export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# Special Makefile rules for English message catalogs with quotation marks.
DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
.SUFFIXES: .insert-header .po-update-en
en@quot.po-create:
$(MAKE) en@quot.po-update
en@boldquot.po-create:
$(MAKE) en@boldquot.po-update
en@quot.po-update: en@quot.po-update-en
en@boldquot.po-update: en@boldquot.po-update-en
.insert-header.po-update-en:
@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
tmpdir=`pwd`; \
echo "$$lang:"; \
ll=`echo $$lang | sed -e 's/@.*//'`; \
LC_ALL=C; export LC_ALL; \
cd $(srcdir); \
if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
rm -f $$tmpdir/$$lang.new.po; \
else \
if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
:; \
else \
echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
exit 1; \
fi; \
fi; \
else \
echo "creation of $$lang.po failed!" 1>&2; \
rm -f $$tmpdir/$$lang.new.po; \
fi
en@quot.insert-header: insert-header.sin
sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
en@boldquot.insert-header: insert-header.sin
sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
mostlyclean: mostlyclean-quot
mostlyclean-quot:
rm -f *.insert-header

454
po/Makefile.in Normal file
View File

@ -0,0 +1,454 @@
# Makefile for PO directory in any package using GNU gettext.
# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
#
# This file can be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU General Public
# License but which still want to provide support for the GNU gettext
# functionality.
# Please note that the actual code of GNU gettext is covered by the GNU
# General Public License and is *not* in the public domain.
#
# Origin: gettext-0.18.3
GETTEXT_MACRO_VERSION = 0.18
PACKAGE = distromatic
VERSION = 1.4.1
PACKAGE_BUGREPORT = silvan.calarco@mambasoft.it
SED = /bin/sed
SHELL = /bin/sh
srcdir = .
top_srcdir = ..
prefix = /usr
exec_prefix = ${prefix}
datarootdir = ${prefix}/share
datadir = ${datarootdir}
localedir = ${datarootdir}/locale
gettextsrcdir = $(datadir)/gettext/po
INSTALL = /bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
# We use $(mkdir_p).
# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
# ${SHELL} /usr/src/RPM/BUILD/distromatic/config/install-sh does not start with $(SHELL), so we add it.
# In automake >= 1.10, $(MKDIR_P) is derived from ${MKDIR_P}, which is defined
# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
# versions, $(mkinstalldirs) and $(install_sh) are unused.
mkinstalldirs = $(SHELL) ${SHELL} /usr/src/RPM/BUILD/distromatic/config/install-sh -d
install_sh = $(SHELL) ${SHELL} /usr/src/RPM/BUILD/distromatic/config/install-sh
MKDIR_P = /bin/mkdir -p
mkdir_p = $(MKDIR_P)
GMSGFMT_ = /usr/bin/msgfmt
GMSGFMT_no = /usr/bin/msgfmt
GMSGFMT_yes = /usr/bin/msgfmt
GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
MSGFMT_ = /usr/bin/msgfmt
MSGFMT_no = /usr/bin/msgfmt
MSGFMT_yes = /usr/bin/msgfmt
MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
XGETTEXT_ = /usr/bin/xgettext
XGETTEXT_no = /usr/bin/xgettext
XGETTEXT_yes = /usr/bin/xgettext
XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
MSGMERGE = msgmerge
MSGMERGE_UPDATE = /usr/bin/msgmerge --update
MSGINIT = msginit
MSGCONV = msgconv
MSGFILTER = msgfilter
POFILES = @POFILES@
GMOFILES = @GMOFILES@
UPDATEPOFILES = @UPDATEPOFILES@
DUMMYPOFILES = @DUMMYPOFILES@
DISTFILES.common = Makefile.in.in remove-potcdate.sin \
$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
$(POFILES) $(GMOFILES) \
$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
POTFILES = \
CATALOGS = @CATALOGS@
# Makevars gets inserted here. (Don't remove this line!)
.SUFFIXES:
.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
.po.mo:
@echo "$(MSGFMT) -c -o $@ $<"; \
$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
.po.gmo:
@lang=`echo $* | sed -e 's,.*/,,'`; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
.sin.sed:
sed -e '/^#/d' $< > t-$@
mv t-$@ $@
all: all-yes
all-yes: stamp-po
all-no:
# Ensure that the gettext macros and this Makefile.in.in are in sync.
CHECK_MACRO_VERSION = \
test "$(GETTEXT_MACRO_VERSION)" = "0.18" \
|| { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version 0.18" 1>&2; \
exit 1; \
}
# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
# we don't want to bother translators with empty POT files). We assume that
# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
# In this case, stamp-po is a nop (i.e. a phony target).
# stamp-po is a timestamp denoting the last time at which the CATALOGS have
# been loosely updated. Its purpose is that when a developer or translator
# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
# invocations of "make" will do nothing. This timestamp would not be necessary
# if updating the $(CATALOGS) would always touch them; however, the rule for
# $(POFILES) has been designed to not touch files that don't need to be
# changed.
stamp-po: $(srcdir)/$(DOMAIN).pot
@$(CHECK_MACRO_VERSION)
test ! -f $(srcdir)/$(DOMAIN).pot || \
test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
@test ! -f $(srcdir)/$(DOMAIN).pot || { \
echo "touch stamp-po" && \
echo timestamp > stamp-poT && \
mv stamp-poT stamp-po; \
}
# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
# otherwise packages like GCC can not be built if only parts of the source
# have been downloaded.
# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
# The determination of whether the package xyz is a GNU one is based on the
# heuristic whether some file in the top level directory mentions "GNU xyz".
# If GNU 'find' is available, we avoid grepping through monster files.
$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep 'GNU distromatic' /dev/null '{}' ';' 2>/dev/null; \
else \
LC_ALL=C grep 'GNU distromatic' $(top_srcdir)/* 2>/dev/null; \
fi; \
} | grep -v 'libtool:' >/dev/null; then \
package_gnu='GNU '; \
else \
package_gnu=''; \
fi; \
if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
else \
msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
fi; \
case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
--add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
--files-from=$(srcdir)/POTFILES.in \
--copyright-holder='$(COPYRIGHT_HOLDER)' \
--msgid-bugs-address="$$msgid_bugs_address" \
;; \
*) \
$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
--add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
--files-from=$(srcdir)/POTFILES.in \
--copyright-holder='$(COPYRIGHT_HOLDER)' \
--package-name="$${package_gnu}distromatic" \
--package-version='1.4.1' \
--msgid-bugs-address="$$msgid_bugs_address" \
;; \
esac
test ! -f $(DOMAIN).po || { \
if test -f $(srcdir)/$(DOMAIN).pot; then \
sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
else \
rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
fi; \
else \
mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
fi; \
}
# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
# every "make" invocation, only create it when it is missing.
# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
$(srcdir)/$(DOMAIN).pot:
$(MAKE) $(DOMAIN).pot-update
# This target rebuilds a PO file if $(DOMAIN).pot has changed.
# Note that a PO file is not touched if it doesn't need to be changed.
$(POFILES): $(srcdir)/$(DOMAIN).pot
@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
if test -f "$(srcdir)/$${lang}.po"; then \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
cd $(srcdir) \
&& { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
*) \
$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
esac; \
}; \
else \
$(MAKE) $${lang}.po-create; \
fi
install: install-exec install-data
install-exec:
install-data: install-data-yes
if test "$(PACKAGE)" = "gettext-tools"; then \
$(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
for file in $(DISTFILES.common) Makevars.template; do \
$(INSTALL_DATA) $(srcdir)/$$file \
$(DESTDIR)$(gettextsrcdir)/$$file; \
done; \
for file in Makevars; do \
rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
done; \
else \
: ; \
fi
install-data-no: all
install-data-yes: all
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
$(mkdir_p) $(DESTDIR)$$dir; \
if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
$(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
if test -n "$$lc"; then \
if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
(cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
for file in *; do \
if test -f $$file; then \
ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
fi; \
done); \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
else \
if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
:; \
else \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
fi; \
fi; \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
fi; \
done; \
done
install-strip: install
installdirs: installdirs-exec installdirs-data
installdirs-exec:
installdirs-data: installdirs-data-yes
if test "$(PACKAGE)" = "gettext-tools"; then \
$(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
else \
: ; \
fi
installdirs-data-no:
installdirs-data-yes:
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
$(mkdir_p) $(DESTDIR)$$dir; \
for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
if test -n "$$lc"; then \
if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
(cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
for file in *; do \
if test -f $$file; then \
ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
fi; \
done); \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
else \
if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
:; \
else \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
fi; \
fi; \
fi; \
done; \
done
# Define this as empty until I found a useful application.
installcheck:
uninstall: uninstall-exec uninstall-data
uninstall-exec:
uninstall-data: uninstall-data-yes
if test "$(PACKAGE)" = "gettext-tools"; then \
for file in $(DISTFILES.common) Makevars.template; do \
rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
done; \
else \
: ; \
fi
uninstall-data-no:
uninstall-data-yes:
catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
done; \
done
check: all
info dvi ps pdf html tags TAGS ctags CTAGS ID:
mostlyclean:
rm -f remove-potcdate.sed
rm -f stamp-poT
rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
rm -fr *.o
clean: mostlyclean
distclean: clean
rm -f Makefile Makefile.in POTFILES *.mo
maintainer-clean: distclean
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
rm -f stamp-po $(GMOFILES)
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
dist distdir:
$(MAKE) update-po
@$(MAKE) dist2
# This is a separate target because 'update-po' must be executed before.
dist2: stamp-po $(DISTFILES)
dists="$(DISTFILES)"; \
if test "$(PACKAGE)" = "gettext-tools"; then \
dists="$$dists Makevars.template"; \
fi; \
if test -f $(srcdir)/$(DOMAIN).pot; then \
dists="$$dists $(DOMAIN).pot stamp-po"; \
fi; \
if test -f $(srcdir)/ChangeLog; then \
dists="$$dists ChangeLog"; \
fi; \
for i in 0 1 2 3 4 5 6 7 8 9; do \
if test -f $(srcdir)/ChangeLog.$$i; then \
dists="$$dists ChangeLog.$$i"; \
fi; \
done; \
if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
for file in $$dists; do \
if test -f $$file; then \
cp -p $$file $(distdir) || exit 1; \
else \
cp -p $(srcdir)/$$file $(distdir) || exit 1; \
fi; \
done
update-po: Makefile
$(MAKE) $(DOMAIN).pot-update
test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
$(MAKE) update-gmo
# General rule for creating PO files.
.nop.po-create:
@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
exit 1
# General rule for updating PO files.
.nop.po-update:
@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
tmpdir=`pwd`; \
echo "$$lang:"; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
cd $(srcdir); \
if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
$(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
*) \
$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
esac; \
}; then \
if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
rm -f $$tmpdir/$$lang.new.po; \
else \
if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
:; \
else \
echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
exit 1; \
fi; \
fi; \
else \
echo "msgmerge for $$lang.po failed!" 1>&2; \
rm -f $$tmpdir/$$lang.new.po; \
fi
$(DUMMYPOFILES):
update-gmo: Makefile $(GMOFILES)
@:
# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
# because execution permission bits may not work on the current file system.
# Use /bin/sh, which is the shell determined by autoconf for the use by its
# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
cd $(top_builddir) \
&& /bin/sh ./config.status $(subdir)/$@.in po-directories
force:
# Tell versions [3.59,3.63) of GNU make not to export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

454
po/Makefile.in.in Normal file
View File

@ -0,0 +1,454 @@
# Makefile for PO directory in any package using GNU gettext.
# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
#
# This file can be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU General Public
# License but which still want to provide support for the GNU gettext
# functionality.
# Please note that the actual code of GNU gettext is covered by the GNU
# General Public License and is *not* in the public domain.
#
# Origin: gettext-0.18.3
GETTEXT_MACRO_VERSION = 0.18
PACKAGE = @PACKAGE@
VERSION = @VERSION@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
SED = @SED@
SHELL = /bin/sh
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
datarootdir = @datarootdir@
datadir = @datadir@
localedir = @localedir@
gettextsrcdir = $(datadir)/gettext/po
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
# We use $(mkdir_p).
# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
# @install_sh@ does not start with $(SHELL), so we add it.
# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
# versions, $(mkinstalldirs) and $(install_sh) are unused.
mkinstalldirs = $(SHELL) @install_sh@ -d
install_sh = $(SHELL) @install_sh@
MKDIR_P = @MKDIR_P@
mkdir_p = @mkdir_p@
GMSGFMT_ = @GMSGFMT@
GMSGFMT_no = @GMSGFMT@
GMSGFMT_yes = @GMSGFMT_015@
GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
MSGFMT_ = @MSGFMT@
MSGFMT_no = @MSGFMT@
MSGFMT_yes = @MSGFMT_015@
MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
XGETTEXT_ = @XGETTEXT@
XGETTEXT_no = @XGETTEXT@
XGETTEXT_yes = @XGETTEXT_015@
XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
MSGMERGE = msgmerge
MSGMERGE_UPDATE = @MSGMERGE@ --update
MSGINIT = msginit
MSGCONV = msgconv
MSGFILTER = msgfilter
POFILES = @POFILES@
GMOFILES = @GMOFILES@
UPDATEPOFILES = @UPDATEPOFILES@
DUMMYPOFILES = @DUMMYPOFILES@
DISTFILES.common = Makefile.in.in remove-potcdate.sin \
$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
$(POFILES) $(GMOFILES) \
$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
POTFILES = \
CATALOGS = @CATALOGS@
# Makevars gets inserted here. (Don't remove this line!)
.SUFFIXES:
.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
.po.mo:
@echo "$(MSGFMT) -c -o $@ $<"; \
$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
.po.gmo:
@lang=`echo $* | sed -e 's,.*/,,'`; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
.sin.sed:
sed -e '/^#/d' $< > t-$@
mv t-$@ $@
all: all-@USE_NLS@
all-yes: stamp-po
all-no:
# Ensure that the gettext macros and this Makefile.in.in are in sync.
CHECK_MACRO_VERSION = \
test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
|| { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
exit 1; \
}
# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
# we don't want to bother translators with empty POT files). We assume that
# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
# In this case, stamp-po is a nop (i.e. a phony target).
# stamp-po is a timestamp denoting the last time at which the CATALOGS have
# been loosely updated. Its purpose is that when a developer or translator
# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
# invocations of "make" will do nothing. This timestamp would not be necessary
# if updating the $(CATALOGS) would always touch them; however, the rule for
# $(POFILES) has been designed to not touch files that don't need to be
# changed.
stamp-po: $(srcdir)/$(DOMAIN).pot
@$(CHECK_MACRO_VERSION)
test ! -f $(srcdir)/$(DOMAIN).pot || \
test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
@test ! -f $(srcdir)/$(DOMAIN).pot || { \
echo "touch stamp-po" && \
echo timestamp > stamp-poT && \
mv stamp-poT stamp-po; \
}
# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
# otherwise packages like GCC can not be built if only parts of the source
# have been downloaded.
# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
# The determination of whether the package xyz is a GNU one is based on the
# heuristic whether some file in the top level directory mentions "GNU xyz".
# If GNU 'find' is available, we avoid grepping through monster files.
$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep 'GNU @PACKAGE@' /dev/null '{}' ';' 2>/dev/null; \
else \
LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \
fi; \
} | grep -v 'libtool:' >/dev/null; then \
package_gnu='GNU '; \
else \
package_gnu=''; \
fi; \
if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
else \
msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
fi; \
case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
--add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
--files-from=$(srcdir)/POTFILES.in \
--copyright-holder='$(COPYRIGHT_HOLDER)' \
--msgid-bugs-address="$$msgid_bugs_address" \
;; \
*) \
$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
--add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
--files-from=$(srcdir)/POTFILES.in \
--copyright-holder='$(COPYRIGHT_HOLDER)' \
--package-name="$${package_gnu}@PACKAGE@" \
--package-version='@VERSION@' \
--msgid-bugs-address="$$msgid_bugs_address" \
;; \
esac
test ! -f $(DOMAIN).po || { \
if test -f $(srcdir)/$(DOMAIN).pot; then \
sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
else \
rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
fi; \
else \
mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
fi; \
}
# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
# every "make" invocation, only create it when it is missing.
# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
$(srcdir)/$(DOMAIN).pot:
$(MAKE) $(DOMAIN).pot-update
# This target rebuilds a PO file if $(DOMAIN).pot has changed.
# Note that a PO file is not touched if it doesn't need to be changed.
$(POFILES): $(srcdir)/$(DOMAIN).pot
@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
if test -f "$(srcdir)/$${lang}.po"; then \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
cd $(srcdir) \
&& { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
*) \
$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
esac; \
}; \
else \
$(MAKE) $${lang}.po-create; \
fi
install: install-exec install-data
install-exec:
install-data: install-data-@USE_NLS@
if test "$(PACKAGE)" = "gettext-tools"; then \
$(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
for file in $(DISTFILES.common) Makevars.template; do \
$(INSTALL_DATA) $(srcdir)/$$file \
$(DESTDIR)$(gettextsrcdir)/$$file; \
done; \
for file in Makevars; do \
rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
done; \
else \
: ; \
fi
install-data-no: all
install-data-yes: all
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
$(mkdir_p) $(DESTDIR)$$dir; \
if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
$(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
if test -n "$$lc"; then \
if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
(cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
for file in *; do \
if test -f $$file; then \
ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
fi; \
done); \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
else \
if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
:; \
else \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
fi; \
fi; \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
fi; \
done; \
done
install-strip: install
installdirs: installdirs-exec installdirs-data
installdirs-exec:
installdirs-data: installdirs-data-@USE_NLS@
if test "$(PACKAGE)" = "gettext-tools"; then \
$(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
else \
: ; \
fi
installdirs-data-no:
installdirs-data-yes:
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
$(mkdir_p) $(DESTDIR)$$dir; \
for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
if test -n "$$lc"; then \
if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
(cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
for file in *; do \
if test -f $$file; then \
ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
fi; \
done); \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
else \
if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
:; \
else \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
fi; \
fi; \
fi; \
done; \
done
# Define this as empty until I found a useful application.
installcheck:
uninstall: uninstall-exec uninstall-data
uninstall-exec:
uninstall-data: uninstall-data-@USE_NLS@
if test "$(PACKAGE)" = "gettext-tools"; then \
for file in $(DISTFILES.common) Makevars.template; do \
rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
done; \
else \
: ; \
fi
uninstall-data-no:
uninstall-data-yes:
catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
done; \
done
check: all
info dvi ps pdf html tags TAGS ctags CTAGS ID:
mostlyclean:
rm -f remove-potcdate.sed
rm -f stamp-poT
rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
rm -fr *.o
clean: mostlyclean
distclean: clean
rm -f Makefile Makefile.in POTFILES *.mo
maintainer-clean: distclean
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
rm -f stamp-po $(GMOFILES)
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
dist distdir:
$(MAKE) update-po
@$(MAKE) dist2
# This is a separate target because 'update-po' must be executed before.
dist2: stamp-po $(DISTFILES)
dists="$(DISTFILES)"; \
if test "$(PACKAGE)" = "gettext-tools"; then \
dists="$$dists Makevars.template"; \
fi; \
if test -f $(srcdir)/$(DOMAIN).pot; then \
dists="$$dists $(DOMAIN).pot stamp-po"; \
fi; \
if test -f $(srcdir)/ChangeLog; then \
dists="$$dists ChangeLog"; \
fi; \
for i in 0 1 2 3 4 5 6 7 8 9; do \
if test -f $(srcdir)/ChangeLog.$$i; then \
dists="$$dists ChangeLog.$$i"; \
fi; \
done; \
if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
for file in $$dists; do \
if test -f $$file; then \
cp -p $$file $(distdir) || exit 1; \
else \
cp -p $(srcdir)/$$file $(distdir) || exit 1; \
fi; \
done
update-po: Makefile
$(MAKE) $(DOMAIN).pot-update
test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
$(MAKE) update-gmo
# General rule for creating PO files.
.nop.po-create:
@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
exit 1
# General rule for updating PO files.
.nop.po-update:
@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
tmpdir=`pwd`; \
echo "$$lang:"; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
cd $(srcdir); \
if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
$(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
*) \
$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
esac; \
}; then \
if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
rm -f $$tmpdir/$$lang.new.po; \
else \
if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
:; \
else \
echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
exit 1; \
fi; \
fi; \
else \
echo "msgmerge for $$lang.po failed!" 1>&2; \
rm -f $$tmpdir/$$lang.new.po; \
fi
$(DUMMYPOFILES):
update-gmo: Makefile $(GMOFILES)
@:
# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
# because execution permission bits may not work on the current file system.
# Use @SHELL@, which is the shell determined by autoconf for the use by its
# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
cd $(top_builddir) \
&& @SHELL@ ./config.status $(subdir)/$@.in po-directories
force:
# Tell versions [3.59,3.63) of GNU make not to export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

53
po/Makevars Normal file
View File

@ -0,0 +1,53 @@
# Makefile variables for PO directory in any package using GNU gettext.
# Usually the message domain is the same as the package name.
DOMAIN = $(PACKAGE)
# These two variables depend on the location of this directory.
subdir = po
top_builddir = ..
# These options get passed to xgettext.
XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
# This is the copyright holder that gets inserted into the header of the
# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
# package. (Note that the msgstr strings, extracted from the package's
# sources, belong to the copyright holder of the package.) Translators are
# expected to transfer the copyright for their translations to this person
# or entity, or to disclaim their copyright. The empty string stands for
# the public domain; in this case the translators are expected to disclaim
# their copyright.
COPYRIGHT_HOLDER = Silvan Calarco <silvan.calarco@mambasoft.it>
# This is the email address or URL to which the translators shall report
# bugs in the untranslated strings:
# - Strings which are not entire sentences, see the maintainer guidelines
# in the GNU gettext documentation, section 'Preparing Strings'.
# - Strings which use unclear terms or require additional context to be
# understood.
# - Strings which make invalid assumptions about notation of date, time or
# money.
# - Pluralisation problems.
# - Incorrect English spelling.
# - Incorrect formatting.
# It can be your email address, or a mailing list address where translators
# can write to without being subscribed, or the URL of a web page through
# which the translators can contact you.
MSGID_BUGS_ADDRESS =
# This is the list of locale categories, beyond LC_MESSAGES, for which the
# message catalogs shall be used. It is usually empty.
EXTRA_LOCALE_CATEGORIES =
# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
# context. Possible values are "yes" and "no". Set this to yes if the
# package uses functions taking also a message context, like pgettext(), or
# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
USE_MSGCTXT = no
# These options get passed to msgmerge.
# Useful options are in particular:
# --previous to keep previous msgids of translated messages,
# --quiet to reduce the verbosity.
MSGMERGE_OPTIONS =

1
po/POTFILES Normal file
View File

@ -0,0 +1 @@
../src/distroquery.c

2
po/POTFILES.in Normal file
View File

@ -0,0 +1,2 @@
# List of source files which contain translatable strings.
src/distroquery.c

47
po/Rules-quot Normal file
View File

@ -0,0 +1,47 @@
# Special Makefile rules for English message catalogs with quotation marks.
DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
.SUFFIXES: .insert-header .po-update-en
en@quot.po-create:
$(MAKE) en@quot.po-update
en@boldquot.po-create:
$(MAKE) en@boldquot.po-update
en@quot.po-update: en@quot.po-update-en
en@boldquot.po-update: en@boldquot.po-update-en
.insert-header.po-update-en:
@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
tmpdir=`pwd`; \
echo "$$lang:"; \
ll=`echo $$lang | sed -e 's/@.*//'`; \
LC_ALL=C; export LC_ALL; \
cd $(srcdir); \
if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
rm -f $$tmpdir/$$lang.new.po; \
else \
if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
:; \
else \
echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
exit 1; \
fi; \
fi; \
else \
echo "creation of $$lang.po failed!" 1>&2; \
rm -f $$tmpdir/$$lang.new.po; \
fi
en@quot.insert-header: insert-header.sin
sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
en@boldquot.insert-header: insert-header.sin
sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
mostlyclean: mostlyclean-quot
mostlyclean-quot:
rm -f *.insert-header

10
po/boldquot.sed Normal file
View File

@ -0,0 +1,10 @@
s/"\([^"]*\)"/“\1”/g
s/`\([^`']*\)'/\1/g
s/ '\([^`']*\)' / \1 /g
s/ '\([^`']*\)'$/ \1/g
s/^'\([^`']*\)' /\1 /g
s/“”/""/g
s///g
s//”/g
s///g
s///g

102
po/distromatic.pot Normal file
View File

@ -0,0 +1,102 @@
# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR Silvan Calarco <silvan.calarco@mambasoft.it>
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: distromatic 1.4.1\n"
"Report-Msgid-Bugs-To: silvan.calarco@mambasoft.it\n"
"POT-Creation-Date: 2013-10-14 01:42+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: 8bit\n"
#: src/distroquery.c:178
msgid "Source"
msgstr ""
#: src/distroquery.c:204
msgid "Search"
msgstr ""
#: src/distroquery.c:249
msgid "Search software packages"
msgstr ""
#: src/distroquery.c:352 src/distroquery.c:522 src/distroquery.c:667
msgid "Download"
msgstr ""
#: src/distroquery.c:361
msgid "Details"
msgstr ""
#: src/distroquery.c:422
msgid "result(s) shown"
msgstr ""
#: src/distroquery.c:425
msgid "Search results for"
msgstr ""
#: src/distroquery.c:489 src/distroquery.c:631
msgid "Version"
msgstr ""
#: src/distroquery.c:496
msgid "Related packages"
msgstr ""
#: src/distroquery.c:524 src/distroquery.c:669
msgid "Developers details"
msgstr ""
#: src/distroquery.c:526
msgid "Source package"
msgstr ""
#: src/distroquery.c:532 src/distroquery.c:670
msgid "Maintainer"
msgstr ""
#: src/distroquery.c:533 src/distroquery.c:671
msgid "Build date"
msgstr ""
#: src/distroquery.c:536
msgid "Obsoletes"
msgstr ""
#: src/distroquery.c:548
msgid "Provides"
msgstr ""
#: src/distroquery.c:562
msgid "Requires"
msgstr ""
#: src/distroquery.c:638
msgid "Built packages"
msgstr ""
#: src/distroquery.c:674
msgid "Source files"
msgstr ""
#: src/distroquery.c:683
msgid "Patches"
msgstr ""
#: src/distroquery.c:693
msgid "Build requirements"
msgstr ""
#: src/distroquery.c:705
msgid "Changelog"
msgstr ""

25
po/en@boldquot.header Normal file
View File

@ -0,0 +1,25 @@
# All this catalog "translates" are quotation characters.
# The msgids must be ASCII and therefore cannot contain real quotation
# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
# and double quote (0x22). These substitutes look strange; see
# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
#
# This catalog translates grave accent (0x60) and apostrophe (0x27) to
# left single quotation mark (U+2018) and right single quotation mark (U+2019).
# It also translates pairs of apostrophe (0x27) to
# left single quotation mark (U+2018) and right single quotation mark (U+2019)
# and pairs of quotation mark (0x22) to
# left double quotation mark (U+201C) and right double quotation mark (U+201D).
#
# When output to an UTF-8 terminal, the quotation characters appear perfectly.
# When output to an ISO-8859-1 terminal, the single quotation marks are
# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
# grave/acute accent (by libiconv), and the double quotation marks are
# transliterated to 0x22.
# When output to an ASCII terminal, the single quotation marks are
# transliterated to apostrophes, and the double quotation marks are
# transliterated to 0x22.
#
# This catalog furthermore displays the text between the quotation marks in
# bold face, assuming the VT100/XTerm escape sequences.
#

22
po/en@quot.header Normal file
View File

@ -0,0 +1,22 @@
# All this catalog "translates" are quotation characters.
# The msgids must be ASCII and therefore cannot contain real quotation
# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
# and double quote (0x22). These substitutes look strange; see
# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
#
# This catalog translates grave accent (0x60) and apostrophe (0x27) to
# left single quotation mark (U+2018) and right single quotation mark (U+2019).
# It also translates pairs of apostrophe (0x27) to
# left single quotation mark (U+2018) and right single quotation mark (U+2019)
# and pairs of quotation mark (0x22) to
# left double quotation mark (U+201C) and right double quotation mark (U+201D).
#
# When output to an UTF-8 terminal, the quotation characters appear perfectly.
# When output to an ISO-8859-1 terminal, the single quotation marks are
# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
# grave/acute accent (by libiconv), and the double quotation marks are
# transliterated to 0x22.
# When output to an ASCII terminal, the single quotation marks are
# transliterated to apostrophes, and the double quotation marks are
# transliterated to 0x22.
#

23
po/insert-header.sin Normal file
View File

@ -0,0 +1,23 @@
# Sed script that inserts the file called HEADER before the header entry.
#
# At each occurrence of a line starting with "msgid ", we execute the following
# commands. At the first occurrence, insert the file. At the following
# occurrences, do nothing. The distinction between the first and the following
# occurrences is achieved by looking at the hold space.
/^msgid /{
x
# Test if the hold space is empty.
s/m/m/
ta
# Yes it was empty. First occurrence. Read the file.
r HEADER
# Output the file's contents by reading the next line. But don't lose the
# current line while doing this.
g
N
bb
:a
# The hold space was nonempty. Following occurrences. Do nothing.
x
:b
}

BIN
po/it.gmo Normal file

Binary file not shown.

102
po/it.po Normal file
View File

@ -0,0 +1,102 @@
# Italian translations for distromatic package.
# Copyright (C) 2013 Silvan Calarco <silvan.calarco@mambasoft.it>
# This file is distributed under the same license as the distromatic package.
# Silvan Calarco <silvan.calarco@mambasoft.it>, 2013.
#
msgid ""
msgstr ""
"Project-Id-Version: distromatic 1.4.1\n"
"Report-Msgid-Bugs-To: silvan.calarco@mambasoft.it\n"
"POT-Creation-Date: 2013-10-14 01:42+0200\n"
"PO-Revision-Date: 2013-10-14 01:19+0200\n"
"Last-Translator: Silvan Calarco <silvan.calarco@mambasoft.it>\n"
"Language-Team: Italian\n"
"Language: it\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ASCII\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#: src/distroquery.c:178
msgid "Source"
msgstr "Sorgente"
#: src/distroquery.c:204
msgid "Search"
msgstr "Cerca"
#: src/distroquery.c:249
msgid "Search software packages"
msgstr "Cerca pacchetti software"
#: src/distroquery.c:352 src/distroquery.c:522 src/distroquery.c:667
msgid "Download"
msgstr "Scarica"
#: src/distroquery.c:361
msgid "Details"
msgstr "Dettagli"
#: src/distroquery.c:422
msgid "result(s) shown"
msgstr "risultati mostrati"
#: src/distroquery.c:425
msgid "Search results for"
msgstr "Risultati della ricerca per"
#: src/distroquery.c:489 src/distroquery.c:631
msgid "Version"
msgstr "Versione"
#: src/distroquery.c:496
msgid "Related packages"
msgstr "Pacchetti collegati"
#: src/distroquery.c:524 src/distroquery.c:669
msgid "Developers details"
msgstr "Dettagli per gli sviluppatori"
#: src/distroquery.c:526
msgid "Source package"
msgstr "Pacchetto sorgente"
#: src/distroquery.c:532 src/distroquery.c:670
msgid "Maintainer"
msgstr "Manutentore"
#: src/distroquery.c:533 src/distroquery.c:671
msgid "Build date"
msgstr "Data di compilazione"
#: src/distroquery.c:536
msgid "Obsoletes"
msgstr "Rende obsoleti"
#: src/distroquery.c:548
msgid "Provides"
msgstr "Fornisce"
#: src/distroquery.c:562
msgid "Requires"
msgstr "Richiede"
#: src/distroquery.c:638
msgid "Built packages"
msgstr "Pacchetti compilati"
#: src/distroquery.c:674
msgid "Source files"
msgstr "File sorgenti"
#: src/distroquery.c:683
msgid "Patches"
msgstr "Patch"
#: src/distroquery.c:693
msgid "Build requirements"
msgstr "Requisiti per la compilazione"
#: src/distroquery.c:705
msgid "Changelog"
msgstr "Modifiche"

6
po/quot.sed Normal file
View File

@ -0,0 +1,6 @@
s/"\([^"]*\)"/“\1”/g
s/`\([^`']*\)'/\1/g
s/ '\([^`']*\)' / \1 /g
s/ '\([^`']*\)'$/ \1/g
s/^'\([^`']*\)' /\1 /g
s/“”/""/g

19
po/remove-potcdate.sin Normal file
View File

@ -0,0 +1,19 @@
# Sed script that remove the POT-Creation-Date line in the header entry
# from a POT file.
#
# The distinction between the first and the following occurrences of the
# pattern is achieved by looking at the hold space.
/^"POT-Creation-Date: .*"$/{
x
# Test if the hold space is empty.
s/P/P/
ta
# Yes it was empty. First occurrence. Remove the line.
g
d
bb
:a
# The hold space was nonempty. Following occurrences. Do nothing.
x
:b
}

1
po/stamp-po Normal file
View File

@ -0,0 +1 @@
timestamp

View File

@ -16,9 +16,11 @@
# 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. # 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
AM_CPPFLAGS = -I$(top_srcdir)/src/include -I$(top_builddir)/src/include -rdynamic AM_CPPFLAGS = -I$(top_srcdir)/src/include -I$(top_builddir)/src/include -rdynamic
LDFLAGS += $(SQLITE_LIBS) -lpthread -rdynamic LDFLAGS += $(SQLITE_LIBS) -lpthread -rdynamic $(LTLIBINTL)
cgidir := $(localstatedir)/www/cgi-bin cgidir := $(localstatedir)/www/cgi-bin
wwwdir := $(localstatedir)/www/html wwwdir := $(localstatedir)/www/html
localedir := $(datadir)/locale
DEFS = -DLOCALEDIR=\"$(localedir)\" @DEFS@
bin_PROGRAMS = distromatic bin_PROGRAMS = distromatic
cgi_PROGRAMS = distroquery cgi_PROGRAMS = distroquery

View File

@ -26,6 +26,10 @@
#include <pthread.h> #include <pthread.h>
#include <signal.h> #include <signal.h>
#include <libintl.h>
#include <locale.h>
#define _(x) gettext(x)
#if HAVE_UNISTD_H #if HAVE_UNISTD_H
# include <unistd.h> # include <unistd.h>
#endif #endif
@ -79,6 +83,7 @@ char *query = "";
char *query_package; char *query_package;
char *query_repository; char *query_repository;
char *query_arch = NULL; char *query_arch = NULL;
char *lang = "";
int query_archs[ARCHS_MAX] = { 1, 0, 0, 0, 0 }; int query_archs[ARCHS_MAX] = { 1, 0, 0, 0, 0 };
struct configTag *query_repositories[100]; struct configTag *query_repositories[100];
@ -170,7 +175,7 @@ void printRPMFlags(int flags) {
void printTagsLine(const char* arch, const char* tag, const char* group, const char* license) { void printTagsLine(const char* arch, const char* tag, const char* group, const char* license) {
if (!arch) if (!arch)
printf("<div style='display:inline;color:white;background-color:red'> Source </div>&nbsp;"); printf("<div style='display:inline;color:white;background-color:red'> %s </div>&nbsp;", _("Source"));
else else
printf("<div style='display:inline;color:white;background-color:green'> %s </div>&nbsp;", arch); printf("<div style='display:inline;color:white;background-color:green'> %s </div>&nbsp;", arch);
printf("<div style='display:inline;color:black;background-color:yellow'> %s </div>&nbsp;" printf("<div style='display:inline;color:black;background-color:yellow'> %s </div>&nbsp;"
@ -196,7 +201,7 @@ void printInputForm() {
printf("<queryform><![CDATA["); printf("<queryform><![CDATA[");
printf("<input id=query onkeyup=if(checkMinLength(this.value,3))%s value=\"%s\">", ajax_call, query); printf("<input id=query onkeyup=if(checkMinLength(this.value,3))%s value=\"%s\">", ajax_call, query);
printf("<button onclick=%s>Cerca</button>", ajax_call); printf("<button onclick=%s>%s</button>", ajax_call, _("Search"));
/* printf("&nbsp;Repository: <select id=repository>"); /* printf("&nbsp;Repository: <select id=repository>");
while (ct) { while (ct) {
printf("<option>%s</option>",ct->tag); printf("<option>%s</option>",ct->tag);
@ -240,7 +245,8 @@ void printInputForm() {
}*/ }*/
printf("]]></queryform>"); printf("]]></queryform>");
printf("<title><![CDATA[Search software packages :: %s]]></title>", printf("<title><![CDATA[%s :: %s]]></title>",
_("Search software packages"),
ct->configdefaults->distribution_name); ct->configdefaults->distribution_name);
} }
@ -337,20 +343,22 @@ void printQueryData() {
/* download */ /* download */
printf("<div style='display:inline;background-color:green'>" printf("<div style='display:inline;background-color:green'>"
"&nbsp;<a href=\"%s%s/SRPMS.base/%s-%s-%s.src.rpm\" style=\"color:white\">Download</a>&nbsp;</div>", "&nbsp;<a href=\"%s%s/SRPMS.base/%s-%s-%s.src.rpm\" style=\"color:white\">%s</a>&nbsp;</div>",
query_repositories[i]->download_prefix, query_repositories[i]->download_prefix,
query_repositories[i]->download_dir, query_repositories[i]->download_dir,
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "name")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "name")),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "version")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "version")),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "release"))); sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "release")),
_("Download"));
/* details */ /* details */
printf("&nbsp;<div style='display:inline;background-color:lightblue;font-weight:strong'>" printf("&nbsp;<div style='display:inline;background-color:lightblue;font-weight:strong'>"
"&nbsp;<a href='javascript:distroquery_request(" "&nbsp;<a href='javascript:distroquery_request("
"\"repository=%s&package=%s&arch=%s\")' style=\"color:black\">Details</a>&nbsp;</div>", "\"repository=%s&package=%s&arch=%s\")' style=\"color:black\">%s</a>&nbsp;</div>",
query_repositories[i]->tag, query_repositories[i]->tag,
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "name")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "name")),
query_repositories[i]->arch[a]); query_repositories[i]->arch[a],
_("Details"));
printf("</div></div><br>"); printf("</div></div><br>");
} }
@ -411,9 +419,10 @@ void printQueryData() {
printf("<hr>"); printf("<hr>");
printf("]]></queryreply>"); printf("]]></queryreply>");
printf("<querystatus><![CDATA[%d result(s) shown.]]></querystatus>", numresults); printf("<querystatus><![CDATA[%d %s.]]></querystatus>", numresults, _("result(s) shown"));
printf("<title><![CDATA[Search results for '%s' :: %s]]></title>", printf("<title><![CDATA[%s '%s' :: %s]]></title>",
_("Search results for"),
query, query,
firstconfigtag->configdefaults->distribution_name); firstconfigtag->configdefaults->distribution_name);
@ -473,17 +482,18 @@ void printPackageData() {
printf("<br><br>" printf("<br><br>"
"<h1><img src=\"%s\" width\"16\" height=\"16\">&nbsp;" "<h1><img src=\"%s\" width\"16\" height=\"16\">&nbsp;"
"%s - %s</h1>Version: %s-%s<br>URL: <a href=\"%s\" target=_new>%s</a><br>Size: %s", "%s - %s</h1>%s: %s-%s<br>URL: <a href=\"%s\" target=_new>%s</a><br>Size: %s",
buffer, buffer,
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "name")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "name")),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "summary")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "summary")),
_("Version"),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "version")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "version")),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "release")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "release")),
sqlite3_column_text(stmt1,sqlite3_find_column_id(stmt1, NULL, "url")), sqlite3_column_text(stmt1,sqlite3_find_column_id(stmt1, NULL, "url")),
sqlite3_column_text(stmt1,sqlite3_find_column_id(stmt1, NULL, "url")), sqlite3_column_text(stmt1,sqlite3_find_column_id(stmt1, NULL, "url")),
humanSize(sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "size")), &strsize)); humanSize(sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "size")), &strsize));
printf("<br>Related packages:"); printf("<br>%s:", _("Related packages"));
snprintf(sql, PATH_MAX, "SELECT * FROM packages WHERE id_source=%d AND NOT id=%d", snprintf(sql, PATH_MAX, "SELECT * FROM packages WHERE id_source=%d AND NOT id=%d",
sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id_source")), sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id_source")),
sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id"))); sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id")));
@ -501,28 +511,29 @@ void printPackageData() {
/* download */ /* download */
printf("<div style='display:inline;background-color:green'>" printf("<div style='display:inline;background-color:green'>"
"&nbsp;<a href=\"%s%s/RPMS.%s/%s-%s-%s.%s.rpm\" style=\"color:white\">Download</a>&nbsp;</div>", "&nbsp;<a href=\"%s%s/RPMS.%s/%s-%s-%s.%s.rpm\" style=\"color:white\">%s</a>&nbsp;</div>",
ct->download_prefix, ct->download_prefix,
ct->download_dir, ct->download_dir,
query_arch, query_arch,
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "name")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "name")),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "version")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "version")),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "release")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "release")),
query_arch); query_arch,
_("Download"));
printf("<hr><br><b>Developers details:</b>"); printf("<hr><br><b>%s:</b>",_("Developers details"));
printf("<br>Source package:"); printf("<br>%s:", _("Source package"));
printf(" <a href='javascript:distroquery_request(\"repository=%s&package=%s\")'>%s</a>", printf(" <a href='javascript:distroquery_request(\"repository=%s&package=%s\")'>%s</a>",
ct->tag, ct->tag,
sqlite3_column_text(stmt1,sqlite3_find_column_id(stmt1, NULL, "name")), sqlite3_column_text(stmt1,sqlite3_find_column_id(stmt1, NULL, "name")),
sqlite3_column_text(stmt1,sqlite3_find_column_id(stmt1, NULL, "name"))); sqlite3_column_text(stmt1,sqlite3_find_column_id(stmt1, NULL, "name")));
printf("<br>Maintainer: %s", sqlite3_column_text(stmt1,sqlite3_find_column_id(stmt1, "packagers", "name"))); printf("<br>%s: %s", _("Maintainer"), sqlite3_column_text(stmt1,sqlite3_find_column_id(stmt1, "packagers", "name")));
printf("<br>Build date: %s", printf("<br>%s: %s", _("Build date"),
simpleTimeToHuman(sqlite3_column_int(stmt1,sqlite3_find_column_id(stmt1, NULL, "buildtime")), (humanDate *) & strdate)); simpleTimeToHuman(sqlite3_column_int(stmt1,sqlite3_find_column_id(stmt1, NULL, "buildtime")), (humanDate *) & strdate));
printf("<br><br>Obsoletes:"); printf("<br><br>%s:", _("Obsoletes"));
snprintf(sql, PATH_MAX, "SELECT * FROM obsoletes WHERE id_package=%d", snprintf(sql, PATH_MAX, "SELECT * FROM obsoletes WHERE id_package=%d",
sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id"))); sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id")));
if (sqlite3_prepare_v2(db, sql, strlen(sql), &stmt1, NULL) == SQLITE_OK) if (sqlite3_prepare_v2(db, sql, strlen(sql), &stmt1, NULL) == SQLITE_OK)
@ -534,7 +545,7 @@ void printPackageData() {
} }
} }
printf("<br><br>Provides:"); printf("<br><br>%s:",_("Provides"));
snprintf(sql, PATH_MAX, "SELECT * FROM provides,provided " snprintf(sql, PATH_MAX, "SELECT * FROM provides,provided "
"WHERE provides.id_package=%d AND provided.id=provides.id_provided " "WHERE provides.id_package=%d AND provided.id=provides.id_provided "
"ORDER BY provided.name", "ORDER BY provided.name",
@ -548,7 +559,7 @@ void printPackageData() {
} }
} }
printf("<br><br>Requires:"); printf("<br><br>%s:", _("Requires"));
snprintf(sql, PATH_MAX, "SELECT * FROM requires,provided " snprintf(sql, PATH_MAX, "SELECT * FROM requires,provided "
"WHERE requires.id_package=%d AND provided.id=requires.id_provided " "WHERE requires.id_package=%d AND provided.id=requires.id_provided "
"ORDER BY provided.name", "ORDER BY provided.name",
@ -613,17 +624,18 @@ void printSourcePackageData() {
printf("<br><br>" printf("<br><br>"
"<h1><img src=\"%s\" width\"16\" height=\"16\">&nbsp;" "<h1><img src=\"%s\" width\"16\" height=\"16\">&nbsp;"
"%s - %s</h1>Version: %s-%s<br>URL: <a href=\"%s\" target=_new>%s</a><br>Size: %s", "%s - %s</h1>%s: %s-%s<br>URL: <a href=\"%s\" target=_new>%s</a><br>Size: %s",
buffer, buffer,
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "name")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "name")),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "summary")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "summary")),
_("Version"),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "version")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "version")),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "release")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "release")),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "url")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "url")),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "url")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "url")),
humanSize(sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "size")), &strsize)); humanSize(sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "size")), &strsize));
printf("<br>Built packages:"); printf("<br>%s:", _("Built packages"));
for (a = 0; a < ARCHS_MAX && ct->arch[a]; a++) { for (a = 0; a < ARCHS_MAX && ct->arch[a]; a++) {
snprintf(dbname, PATH_MAX, "%s%s-%s.db", ct->repository_dir, ct->tag, ct->arch[a]); snprintf(dbname, PATH_MAX, "%s%s-%s.db", ct->repository_dir, ct->tag, ct->arch[a]);
if (!sqlite3_open_v2(dbname, &dba, SQLITE_OPEN_READONLY, NULL)) { if (!sqlite3_open_v2(dbname, &dba, SQLITE_OPEN_READONLY, NULL)) {
@ -646,19 +658,20 @@ void printSourcePackageData() {
/* download */ /* download */
printf("<div style='display:inline;background-color:red'>" printf("<div style='display:inline;background-color:red'>"
"&nbsp;<a href=\"%s%s/SRPMS.base/%s-%s-%s.src.rpm\" style=\"color:white\">Download</a>&nbsp;</div>", "&nbsp;<a href=\"%s%s/SRPMS.base/%s-%s-%s.src.rpm\" style=\"color:white\">%s</a>&nbsp;</div>",
ct->download_prefix, ct->download_prefix,
ct->download_dir, ct->download_dir,
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "name")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "name")),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "version")), sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "version")),
sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "release"))); sqlite3_column_text(statement,sqlite3_find_column_id(statement, NULL, "release")),
_("Download"));
printf("<hr><br><b>Developers details:</b>"); printf("<hr><br><b>%s:</b>", _("Developers details"));
printf("<br>Maintainer: %s", sqlite3_column_text(statement,sqlite3_find_column_id(statement, "packagers", "name"))); printf("<br>%s: %s", _("Maintainer"), sqlite3_column_text(statement,sqlite3_find_column_id(statement, "packagers", "name")));
printf("<br>Build date: %s", printf("<br>%s: %s", _("Build date"),
simpleTimeToHuman(sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "buildtime")), (humanDate *) & strdate)); simpleTimeToHuman(sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "buildtime")), (humanDate *) & strdate));
printf("<br><br>Source files:"); printf("<br><br>%s:", _("Source files"));
snprintf(sql, PATH_MAX, snprintf(sql, PATH_MAX,
"SELECT * FROM sources_source WHERE id_source=%d", "SELECT * FROM sources_source WHERE id_source=%d",
sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id"))); sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id")));
@ -667,7 +680,7 @@ void printSourcePackageData() {
printf(" %s", sqlite3_column_text(stmt1,sqlite3_find_column_id(stmt1, NULL, "source"))); printf(" %s", sqlite3_column_text(stmt1,sqlite3_find_column_id(stmt1, NULL, "source")));
} }
printf("<br><br>Patches:"); printf("<br><br>%s:", _("Patches"));
snprintf(sql, PATH_MAX, snprintf(sql, PATH_MAX,
"SELECT * FROM sources_patch WHERE id_source=%d", "SELECT * FROM sources_patch WHERE id_source=%d",
sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id"))); sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id")));
@ -677,7 +690,7 @@ void printSourcePackageData() {
} }
printf("<br><br>Build requirements:"); printf("<br><br>%s:", _("Build requirements"));
snprintf(sql, PATH_MAX, "SELECT * FROM buildrequires WHERE id_source=%d", snprintf(sql, PATH_MAX, "SELECT * FROM buildrequires WHERE id_source=%d",
sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id"))); sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id")));
if (sqlite3_prepare_v2(db, sql, strlen(sql), &stmt1, NULL) == SQLITE_OK) if (sqlite3_prepare_v2(db, sql, strlen(sql), &stmt1, NULL) == SQLITE_OK)
@ -689,7 +702,7 @@ void printSourcePackageData() {
} }
} }
printf("<br><br>Changelog:<br>"); printf("<br><br>%s:<br>", _("Changelog"));
snprintf(sql, PATH_MAX, snprintf(sql, PATH_MAX,
"SELECT * FROM changelog,packagers WHERE id_source=%d AND changelog.id_packager=packagers.id", "SELECT * FROM changelog,packagers WHERE id_source=%d AND changelog.id_packager=packagers.id",
sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id"))); sqlite3_column_int(statement,sqlite3_find_column_id(statement, NULL, "id")));
@ -749,6 +762,8 @@ void parse_request_variables(char *data) {
search_sources = strstr(valuetok, "false") != valuetok; search_sources = strstr(valuetok, "false") != valuetok;
} else if (!strcmp(vartok, "searchbox")) { } else if (!strcmp(vartok, "searchbox")) {
searchbox = strstr(valuetok, "false") != valuetok; searchbox = strstr(valuetok, "false") != valuetok;
} else if (!strcmp(vartok, "lang")) {
lang = valuetok;
} }
} }
@ -774,6 +789,7 @@ void parse_request_variables(char *data) {
int int
main(int argc, char *argv[]) main(int argc, char *argv[])
{ {
char *repository_dir = NULL; char *repository_dir = NULL;
// char *configfile = NULL; // char *configfile = NULL;
char *data; char *data;
@ -781,6 +797,7 @@ main(int argc, char *argv[])
// install backtrace handler // install backtrace handler
signal(SIGSEGV, backtraceHandler); signal(SIGSEGV, backtraceHandler);
printf("Content-Type: text/xml;charset=utf-8\n\n<distroquery>"); printf("Content-Type: text/xml;charset=utf-8\n\n<distroquery>");
firstconfigtag = read_configuration(DEFAULT_CONFIGFILE); firstconfigtag = read_configuration(DEFAULT_CONFIGFILE);
@ -794,6 +811,10 @@ main(int argc, char *argv[])
parse_request_variables(data); parse_request_variables(data);
} }
setlocale( LC_ALL, lang);
bindtextdomain(PACKAGE, LOCALEDIR);
textdomain(PACKAGE);
if (query_package && strlen(query_package)) { if (query_package && strlen(query_package)) {
if (query_arch) if (query_arch)
printPackageData(); printPackageData();
@ -810,4 +831,3 @@ main(int argc, char *argv[])
printf("</distroquery>\n"); printf("</distroquery>\n");
exit(0); exit(0);
} }